journal article·2014-08Open access

Heterogeneous Nucleation of α-Al Grain on Primary α-AlFeMnSi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM

Wenchao Yang, Shouxun Ji, Xiaorong Zhou, Ian Stone, Geoff Scamans, George E. Thompson, Zhongyun Fan

Abstract

Microstructural examination of the Al-5.3Mg-2.4Si-0.6Mn-1.0Fe alloy in the die-cast condition revealed that a significant number of the primary α-AlFeMnSi intermetallic particles were found inside both the coarse α-Al dendrite fragments formed in the shot sleeve and the fine α-Al grains formed in the die cavity. The heterogeneous nucleation of α-Al phase on primary α-AlFeMnSi intermetallic particle was further investigated experimentally. 3-Dimension (3D) scanning electron microscopy ultramicrotomy revealed that the probability of finding at least one primary α-AlFeMnSi intermetallic particle inside each α-Al grain was almost 90 pct. The detailed microstructural analysis identified the primary α-AlFeMnSi intermetallic particle as the α-Al12(Fe,Mn) 3Si composition with a body-centered cubic structure and a lattice parameter of a = 1.265 nm. It was found that the primary α-Al 12(Fe,Mn)3Si intermetallic particle had a faceted morphology with {110} planes exposed as its natural surfaces. High resolution transmission electron microscopy further confirmed that the crystallographic orientation relationship between α-Al12(Fe,Mn)3Si intermetallic particle and α-Al phase was: [111]α- AlFeMnSi//[110]A1 and (11̄0)α-AlFeMnSi ∼6 deg from (11̄1)α-Al, and the corresponding interface between two phases could be confirmed as a semi-coherent interface with a lattice misfit of 2.67 pct at 933 K (660 °C), which was considerably smaller than the theoretical limit (5.7 pct) for epitaxial nucleation. Finally, based on these experimental evidences and the epitaxial nucleation model, we concluded that the primary α-Al12(Fe,Mn) 3Si intermetallic particles were both potent and effective nucleating substrates for the α-Al phase. © The Minerals, Metals & Materials Society and ASM International 2014.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. J.A.Dantzig and M.Rappaz: Solidification, EPFL Press, Lausanne, 2009.10.1201/9781439808030 ↗
2. M. Volmer and A. Webber: Z. Phys. Chem., 1926, vol. 119, pp. 277-301.10.1515/zpch-1926-11927 ↗
3. K.F.Kelton and A.L.Greer: Nucleation in Condensed Matter, Elsevier, Oxford, 2011.
4. B. Cantor: Phil. Trans. R. Soc. Lond., 2003, vol. 361, pp. 409-17.10.1098/rsta.2002.1137 ↗
5. I.Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229-37.10.1016/0001-6160(75)90188-1 ↗
6. A.L.Greer, A.M. Bunn, A. Tronche, P.V. Evans and D.J. Bristow:Acta Mater., 2000, vol. 48, pp. 2823-35.10.1016/S1359-6454(00)00094-X ↗
7. M.X. Zhang, R.M. Kelly, M.A. Easton and J.A. Taylor: Acta Mater., 2005, vol. 53, pp. 1427-38.10.1016/j.actamat.2004.11.037 ↗
8. B. Jiang, D. Qiu, M.X. Zhang, P.D. Ding and L. Gao: J. Alloys. Compd., 2010, vol. 492, pp. 95-98.10.1016/j.jallcom.2009.11.066 ↗
9. Z. Fan: Metall. Mater. Trans. A, 2013, vol. 44, pp. 1409-18.10.1007/s11661-012-1495-8 ↗
10. B.S. Murty, S.A. Kori, M. Chakraborty: Inter. Mater. Rev., 2002, vol. 47, pp. 3-29.10.1179/095066001225001049 ↗
11. X. Zhou, C. Luo, T. Hashimoto, A.E. Hughes, G.E. Thompson: Corros. Sci., 2012, vol. 58, pp. 299-306.10.1016/j.corsci.2012.02.001 ↗
12. T. Hashimoto, X. Zhou, C. Luo, K. Kawano, G.E. Thompson, A.E. Hughes, P. Skeldon, P.J. Withers, T.J. Marrow, A.H. Sherry: Scripta Mater., 2010, vol. 63, pp. 835-38.10.1016/j.scriptamat.2010.06.031 ↗
13. S. Ji, W. Yang, F. Gao, D. Watson, Z. Fan: Mater. Sci. Eng. A, 2013, vol. 564, pp. 130-39.10.1016/j.msea.2012.11.095 ↗
14. N.A. Belov, A.A. Aksenov and D.G. Eskin: Iron in Aluminum Alloys,Taylor & Francis, London, 2002.10.1201/9781482265019 ↗
15. M. Cooper: Acta Cryst. 1967, vol. 23, pp. 1106-07.10.1107/S0365110X67004372 ↗
16. S.L. Chen, S. Daniel, F. Zhang, Y.A. Chang, X.Y. Yan, F.Y, Xie, R. Schmid-Fetzer and W.A. Oates: CALPHAD, 2002, vol. 26, pp. 175-88.10.1016/S0364-5916(02)00034-2 ↗
17. P.L. Schaffer, D.N. Miller, A.K. Dahle: Scripta Mater., 2007, vol. 57, pp. 1129-32.10.1016/j.scriptamat.2007.08.009 ↗
18. Z.H. Lai, C.H. Li: Scripta Metall., 1993, vol. 29, pp. 895-900.10.1016/0956-716X(93)90378-6 ↗
19. P. Donnadieu, G. Lapasset, T. Sanders: Phil. Mag. Lett., 1994, vol. 70, pp. 319-26.10.1080/09500839408240993 ↗
20. M.V. Kral: Mater. Lett., 2005, vol. 59, pp. 2271-76.10.1016/j.matlet.2004.05.091 ↗
21. S. Morito, H. Tanaka, R. Konishi, T. Furuhara and T. Maki: Acta Mater., 2003 ,vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
22. C.L. Chen and R.C. Thomson: Intermetallics, 2010, vol. 18, pp. 1750-57.10.1016/j.intermet.2010.05.015 ↗
23. M. Johnsson and L. Eriksson: Z. Metallkd., 1998, vol. 89, pp. 478-80.
24. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987-98.10.1007/BF02642799 ↗
25. J.Y. Hwang, H.W. Doty, M.J. Kaufman: Mater. Sci. Eng. A, 2008, vol. 488, pp. 496-504.10.1016/j.msea.2007.12.026 ↗
26. J. Gibbs: The collected works of J. Willard Gibbs., Langman, Green and Co, New York, 1928, vol 1.
27. X. Fang, G. Shao, Y.Q. Liu, Z. Fan: Mater. Sci. Eng. A, 2007, vol. 445-446, pp. 65-72.10.1016/j.msea.2006.09.038 ↗