In Situ Observation of Phase Transformation in Low-Carbon, Boron-Treated Steels
Source abstract
Abstract
It is known that adding the appropriate amount of boron to steels dramatically increases their hardness and toughness as a result of the transition of the microstructure from grain boundary nucleation to intragranular nucleation. In this study, precipitation and phase transformation kinetics in heat-affected zones of low-carbon, boron-treated steels are observed directly by high-temperature laser scanning confocal microscopy. The effects of boron content and austenite grain size on the phase transformation process are investigated systematically by quantifying the transformation product, the transformation start temperature, the average length of the ferrite plates, and the average number of potent nucleation sites. Finally, detailed methods for controlling and optimizing the microstructure in the heat-affected zones of low-carbon, boron-treated steels are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. H.K.D.H. Bhadeshia: Bainite in Steels, London IOM Communications, London, UK, 2001, pp. 237-76.
2. L. Cheng and K.M. Wu: Acta Mater., 2009, vol. 57, pp. 3754-62.10.1016/j.actamat.2009.04.045 ↗
3. T. Koseki and G. Thewlis: Mater. Sci. Technol., 2005, vol. 21, pp. 867-79.10.1179/174328405X51703 ↗
4. S.S. Babu: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 267-78.10.1016/j.cossms.2004.10.001 ↗
5. D.S. Sarma, A.V. Karasev, and P.G. Jonsson: ISIJ Int., 2009, vol. 49, pp. 1063-64.10.2355/isijinternational.49.1063 ↗
6. S.S. Babu and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, pp. 1005-20.10.1179/026708390790189605 ↗
7. J.S. Byun, J.H. Shim, Y.W. Cho, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 1593-1606.10.1016/S1359-6454(02)00560-8 ↗
8. J.H. Shim, Y.J. Oh, J.Y. Suh, Y.W. Cho, J.D. Shim, J.S. Byun, and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2115-22.10.1016/S1359-6454(01)00134-3 ↗
9. H. Terasaki and Y. Komizo: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 561-66.10.1179/174329306X149795 ↗
10. D. Zhang, H. Terasaki, and Y. Komizo: Acta Mater., 2010, vol. 58, pp. 1369-78.10.1016/j.actamat.2009.10.043 ↗
11. P.H. Maitrepierre, J. Rofes-vernis, and D. Thivellier: Boron in Steel, Conf. Proc. of the Metallurgical Society of AIME, 1980, pp. 1–19.
12. Y. Ohmori and K. Yamanaka: Boron in Steel, Conf. Proc. of the Metallurgical Society of AIME, 1980, pp. 44–61.
13. S. Ueda, M. Ishikawa, and N. Ohashi: Boron in Steel, Conf. Proc. of the Metallurgical Society of AIME, 1980, pp. 181–99.
14. K. Yamamoto, T. Hasegawa, and J. Takamura: ISIJ Int., 1996, vol. 36, pp. 80-86.10.2355/isijinternational.36.80 ↗
15. M. Ueno and T. Inoue: Trans. ISIJ, 1973, vol. 13, pp. 210-17.10.2355/isijinternational1966.13.210 ↗
16. D. Phelan, N. Stanford, and R. Dippenaar: Mater. Sci. Eng. A, 2005, vol. 407, pp. 127-34.10.1016/j.msea.2005.07.015 ↗
17. H. Shibata, Y. Arai, M. Suzuki, and T. Emi: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 981-91.10.1007/s11663-000-0074-3 ↗
18. D. Zhang, H. Terasaki, and Y. Komizo: J. Alloys Compd., 2009, vol. 484, pp. 929-33.10.1016/j.jallcom.2009.05.074 ↗
19. T. Yamada, H. Terasaki, and Y. Komizo: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 118-25.10.1179/174329308X271797 ↗
20. D. Zhang, H. Terasaki, and Y. Komizo: Ceramic Trans., 2009, vol. 219, pp. 397-401.
21. H. Terasaki and Y. Komizo: Scripta Mater., 2011, vol. 64, pp. 29-32.10.1016/j.scriptamat.2010.08.055 ↗
22. Y. Komizo, H. Terasaki, M. Yonemura, and T. Osuki: Weld. World, 2008, vol. 52, pp. 56-63.10.1007/BF03266641 ↗
23. T. Yamada: Ph.D. Dissertation, Osaka University, Osaka, Japan, 2010.
24. R.W. Fountain and J. Chipman: Trans. AIME, 1962, vol. 224, pp. 599-605.
25. Y. Ohno, Y. Okamura, S. Matsuda, K. Yamamoto, and T. Mukai: Tetsu to Hagane, 1987, vol. 73, pp. 1010-17.10.2355/tetsutohagane1955.73.8_1010 ↗
26. C.A. Dube, H.I. Aaronson, and R.F. Mehl: Rev. Metall., 1958, vol. 55, pp. 201-10.10.1051/metal/195855030201 ↗
27. H.I. Aaronson, M. Enomoto, and J.K. Lee: Mechanisms of Diffusional Phase Transformations in Metals and Alloys, CRC Press, Boca Raton, FL, 2009, pp. 303-06.
28. M.V. Kral and G. Spanos: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1199-1207.10.1007/s11661-005-0212-2 ↗
29. X.L. He, Y.Y. Chu, and J.J. Jonas: Acta Mater., 1989, vol. 37, pp. 147-61.10.1016/0001-6160(89)90274-5 ↗
30. M. Ueno and T. Inoue: Trans. ISIJ, 1973, vol. 13, pp. 210-17.10.2355/isijinternational1966.13.210 ↗
31. X.L. He, Y.Y. Chu, and J.J. Jonas: Acta Mater., 1989, vol. 37, pp. 2905-16.10.1016/0001-6160(89)90325-8 ↗
32. D. Lin, D. Chen, and H. Lin: Acta Mater., 1991, vol. 39, pp. 523-28.10.1016/0956-7151(91)90120-P ↗
33. P.E. Busby, M.E. Warga, and C. Wells: Trans. AIME, 1953, vol. 197, pp. 1463-68.
34. G. Thewlis: Mater. Sci. Technol., 1994, vol. 10, pp. 110-25.10.1179/mst.1994.10.2.110 ↗
35. G. Thewlis, J.A. Whiteman, and D.J. Senogles: Mater. Sci. Technol., 1997, vol. 13, pp. 257-73.10.1179/mst.1997.13.3.257 ↗
36. J. Moon, J.B. Lee, and C.H. Lee: Mater. Sci. Eng. A, 2007, vol. 459, pp. 40-46.10.1016/j.msea.2006.12.073 ↗
37. J. Moon, S. Kim, J. Lee, and C. Lee: Scripta Mater., 2007, vol. 56, pp. 1083-86.10.1016/j.scriptamat.2007.02.025 ↗
38. B.L. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987-95.10.1007/BF02642799 ↗
39. I. Madariaga and I. Gutierrez: Acta Mater., 1999, vol. 47, pp. 951-60.10.1016/S1359-6454(98)00388-7 ↗
40. A.R. Mills, G. Thewlis, and J.A. Whiteman: Mater. Sci. Technol., 1987, vol. 3, pp. 1051-61.10.1179/mst.1987.3.12.1051 ↗
41. K. Yamamoto, T. Hasegawa, and J. Takamura: ISIJ Int., 1996, vol. 36, pp. 80-86.10.2355/isijinternational.36.80 ↗