journal article·2015-11

Simulation of Channel Segregation During Directional Solidification of In—75 wt pct Ga. Qualitative Comparison with In Situ Observations

Ali Saad, Charles-André Gandin, Michel Bellet, Natalia Shevchenko, Sven Eckert

Publisher page

Abstract

Freckles are common defects in industrial casting. They result from thermosolutal convection due to buoyancy forces generated from density variations in the liquid. The present paper proposes a numerical analysis for the formation of channel segregation using the three-dimensional (3D) cellular automaton (CA)—finite element (FE) model. The model integrates kinetics laws for the nucleation and growth of a microstructure with the solution of the conservation equations for the casting, while introducing an intermediate modeling scale for a direct representation of the envelope of the dendritic grains. Directional solidification of a cuboid cell is studied. Its geometry, the alloy chosen as well as the process parameters are inspired from experimental observations recently reported in the literature. Snapshots of the convective pattern, the solute distribution, and the morphology of the growth front are qualitatively compared. Similitudes are found when considering the coupled 3D CAFE simulations. Limitations of the model to reach direct simulation of the experiments are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. C. Beckermann, “Modelling of macrosegregation: applications and future needs,” Int. Mater. Rev., vol. 47, no. 5, pp. 243–261, 2002.10.1179/095066002225006557 ↗
2. A. F. Giamei and B. H. Kear, “On the nature of freckles in nickel base superalloys,” Metall. Trans., vol. 1, no. 8, pp. 2185–2192, Aug. 1970.10.1007/BF02643434 ↗
3. M. C. Schneider, J. P. Gu, C. Beckermann, W. J. Boettinger, and U. R. Kattner, “Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification,” Metall. Mater. Trans. A, vol. 28, no. 7, pp. 1517–1531, Jul. 1997.10.1007/s11661-997-0214-3 ↗
4. C. Beckermann, J. P. Gu, and W. J. Boettinger, “Development of a freckle predictor via rayleigh number method for single-crystal nickel-base superalloy castings,” Metall. Mater. Trans. A, vol. 31, no. 10, pp. 2545–2557, Oct. 2000.10.1007/s11661-000-0199-7 ↗
5. P.D. Genereux and C.A. Borg: International Symposium on Superalloys 2000, Warrendale, PA, 2000, pp. 19–27.10.7449/2000/Superalloys_2000_19_27 ↗
6. E. J. Pickering, “Macrosegregation in Steel Ingots: The Applicability of Modelling and Characterisation Techniques,” ISIJ Int., vol. 53, no. 6, pp. 935–949, 2013.10.2355/isijinternational.53.935 ↗
7. M. C. Flemings and G. E. Nereo, “Macrosegregation: Part I,” Trans. Metall. Soc. AIME, vol. 239, pp. 1449–1461, 1967.
8. M. C. Flemings, R. Mehrabian, and G. E. Nereo, “Macrosegregation: Part II,” Trans. Metall. Soc. AIME, vol. 242, pp. 41–49, 1968.
9. M. C. Flemings and G. E. Nereo, “Macrosegregation: Part III,” Trans. Metall. Soc. AIME, vol. 242, pp. 50–55, 1968.
10. J. C. Ramirez and C. Beckermann, “Evaluation of a rayleigh-number-based freckle criterion for Pb-Sn alloys and Ni-base superalloys,” Metall. Mater. Trans. A, vol. 34, no. 7, pp. 1525–1536, Jul. 2003.10.1007/s11661-003-0264-0 ↗
11. P. B. L. Auburtin, “Determination of the influence of growth front angle on freckle formation in superalloys,” University of British Columbia, Vancouver, BC, Canada, 1998.
12. N. Shevchenko, S. Boden, G. Gerbeth, and S. Eckert, “Chimney Formation in Solidifying Ga-25wt pct In Alloys Under the Influence of Thermosolutal Melt Convection,” Metall. Mater. Trans. A, vol. 44, no. 8, pp. 3797–3808, Aug. 2013.10.1007/s11661-013-1711-1 ↗
13. S. D. Felicelli, J. C. Heinrich, and D. R. Poirier, “Simulation of freckles during vertical solidification of binary alloys,” Metall. Trans. B, vol. 22, no. 6, pp. 847–859, Dec. 1991.10.1007/BF02651162 ↗
14. S. D. Felicelli, D. R. Poirier, and J. C. Heinrich, “Modeling freckle formation in three dimensions during solidification of multicomponent alloys,” Metall. Mater. Trans. B, vol. 29, no. 4, pp. 847–855, Aug. 1998.10.1007/s11663-998-0144-5 ↗
15. J. Guo and C. Beckermann, “Three-Dimensional Simulation of Freckle Formation During Binary Alloy Solidification: Effect of Mesh Spacing,” Numer. Heat Transf. Part Appl., vol. 44, no. 6, pp. 559–576, 2003.10.1080/716100512 ↗
16. F. Kohler: Ph.D. Thesis, EPFL, Lausanne, 2008.
17. J.-L. Desbiolles, P. Thévoz, M. Rappaz, and D. Stefanescu: Proceedings of Modeling of Casting, Welding and Advanced Solidification Processes - X, 2003, pp. 245–52.
18. S. Boden, S. Eckert, B. Willers, and G. Gerbeth, “X-Ray Radioscopic Visualization of the Solutal Convection during Solidification of a Ga-30 Wt Pct In Alloy,” Metall. Mater. Trans. A, vol. 39, no. 3, pp. 613–623, Mar. 2008.10.1007/s11661-007-9462-5 ↗
19. J. A. Dantzig and M. Rappaz, Solidification. EPFL Press, London 2009.10.1201/9781439808030 ↗
20. E. Hachem, B. Rivaux, T. Kloczko, H. Digonnet, and T. Coupez, “Stabilized finite element method for incompressible flows with high Reynolds number,” J. Comput. Phys., vol. 229, no. 23, pp. 8643–8665, Nov. 2010.10.1016/j.jcp.2010.07.030 ↗
21. V. R. Voller, A. D. Brent, and C. Prakash, “The modelling of heat, mass and solute transport in solidification systems,” Int. J. Heat Mass Transf., vol. 32, no. 9, pp. 1719–1731, Sep. 1989.10.1016/0017-9310(89)90054-9 ↗
22. A. Saad, C.-A. Gandin, and M. Bellet: “Temperature-based energy solver coupled with tabulated thermodynamic properties - Application to the prediction of macrosegregation in multicomponent alloys,” Comp. Mater. Sci., vol. 99, pp. 221–231, 2015.10.1016/j.commatsci.2014.12.009 ↗
23. T. Carozzani, C.-A. Gandin, H. Digonnet, M. Bellet, K. Zaidat, and Y. Fautrelle, “Direct Simulation of a Solidification Benchmark Experiment,” Metall. Mater. Trans. A, vol. 44, no. 2, pp. 873–887, Feb. 2013.10.1007/s11661-012-1465-1 ↗
24. T. Carozzani, H. Digonnet, and C.-A. Gandin, “3D CAFE modeling of grain structures: application to primary dendritic and secondary eutectic solidification,” Model. Simul. Mater. Sci. Eng., vol. 20, no. 1, p. 015010, Jan. 2012.10.1088/0965-0393/20/1/015010 ↗
25. T. Carozzani, C.-A. Gandin, and H. Digonnet, “Optimized parallel computing for cellular automaton-finite element modeling of solidification grain structures,” Model. Simul. Mater. Sci. Eng., vol. 22, no. 1, p. 015012, Jan. 2014.10.1088/0965-0393/22/1/015012 ↗
26. C.-A. Gandin, G. Guillemot, B. Appolaire, and N. T. Niane, “Boundary layer correlation for dendrite tip growth with fluid flow,” Mater. Sci. Eng. A, vol. 342, no. 1–2, pp. 44–50, Feb. 2003.10.1016/S0921-5093(02)00261-7 ↗
27. G. Guillemot, C.-A. Gandin, and M. Bellet, “Interaction between single grain solidification and macrosegregation: Application of a cellular automaton—Finite element model,” J. Cryst. Growth, vol. 303, no. 1, pp. 58–68, May 2007.10.1016/j.jcrysgro.2006.12.076 ↗
28. G. Reinhart, C.-A. Gandin, N. Mangelinck-Noël, H. Nguyen-Thi, J.-E. Spinelli, J. Baruchel, and B. Billia, “Influence of natural convection during upward directional solidification: A comparison between in situ X-ray radiography and direct simulation of the grain structure,” Acta Mater., vol. 61, no. 13, pp. 4765–4777, Aug. 2013.10.1016/j.actamat.2013.04.067 ↗
29. P. Auburtin, T. Wang, S. L. Cockcroft, and A. Mitchell, “Freckle formation and freckle criterion in superalloy castings,” Metall. Mater. Trans. B, vol. 31, no. 4, pp. 801–811, Aug. 2000.10.1007/s11663-000-0117-9 ↗
30. J. O. Andersson, T. Helander, L. Höglund, P. F. Shi, and B. Sundman, “Thermo-Calc and DICTRA,” Comput. Tools Mater. Sci., vol. 26, pp. 273–312.
31. TCBIN: TC Binary Solutions Database, version 1.0. Stockholm, SE: Thermo-Calc Software AB, 2006.