journal article·2018-09Open access

On the Coupling between Recrystallization and Precipitation Following Hot Deformation in a γ-γ′ Nickel-Based Superalloy

Anthony Seret, Charbel Moussa, Marc Bernacki, Nathalie Bozzolo

Abstract

Postdynamic recrystallization and γ′ precipitation during cooling from γ′ supersolvus temperature after hot compression were studied in the AD730 (AD730 is a trademark of Aubert et Duval Company in Paris, France) γ-γ′ nickel-based superalloy. Emphasis was on not only both phenomena as distinct mechanisms but also on their mutual influence in terms of physical mechanisms. The growth of γ′ precipitates is hastened in the unrecrystallized grains compared to the recrystallized ones. This could possibly be attributed to the higher dislocation content acting as high-diffusivity paths. Postdynamic recrystallization is not prevented by Smith–Zener pinning of the recrystallization front by the γ′ precipitates. Instead, the recrystallization front dissolves γ′ precipitates, which then reprecipitate discontinuously or continuously and coherently with the surrounding γ matrix in the recrystallized grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A.J. Porter and B. Ralph: Mater. Sci. Eng., 1983, vol. 59, pp. 69–78.10.1016/0025-5416(83)90089-7 ↗
2. X.M. Chen, Y.C. Lin, M.S. Chen, H.B. Li, D.X. Wen, J.L. Zhang, and M. He: Mater. Des., 2015, vol. 77, pp. 41–49.10.1016/j.matdes.2015.04.004 ↗
3. Y.C. Lin, J. Deng, Y.-Q. Jiang, D.-X. Wen, and G. Liu: Mater. Des., 2014, vol. 55, pp. 949–57.10.1016/j.matdes.2013.10.071 ↗
4. A Etaati, K Dehghani: Mater. Chem. Phys., 2013, vol. 140, pp. 208–15.10.1016/j.matchemphys.2013.03.022 ↗
5. Y. Ning, M.W. Fu, and X. Chen: Mater. Sci. Eng., 2012, vol. 540, pp. 164–73.10.1016/j.msea.2012.01.121 ↗
6. D.-X. Wen, Y.C. Lin, H.-B. Li, X.-M. Chen, D.J., and L.L.-T.: Mater. Sci. Eng., 2014, vol. 591, pp. 183–92.10.1016/j.msea.2013.09.049 ↗
7. X.-M. Chen, Y.C. Lin, D.-X. Wen, J.-L. Zhang, and M. He: Mater. Des., 2014, vol. 57, pp. 568–77.10.1016/j.matdes.2013.12.072 ↗
8. X. Tang, B. Wang, H. Ji, X. Fu, and W. Xiao: Mater. Sci. Eng., 2016, vol. 675A, pp. 192–203.10.1016/j.msea.2016.08.061 ↗
9. L.X. Zhou and T.N. Baker: Mater. Sci. Eng., 1995, vol. 196, pp. 89–95.10.1016/0921-5093(94)09717-8 ↗
10. R.P. Guest and S. Tin: Proc. 6th Int. Symp. on Superalloys 718, 625, 706 and Derivatives, Pittsburgh, PA, May 17–20, 2005.
11. A. Devaux, A. Helstroffer, J. Cormier, and F. Pettinari-Sturmel: Proc. 8th Int. Symp. on Superalloy 718 and Derivatives, Pittsburgh, PA, Sept. 28–Oct. 1, 2014.
12. C. Slama and M. Abdellaoui, J. Alloys Compd., 2000, vol. 306, pp. 277–84.10.1016/S0925-8388(00)00789-1 ↗
13. M. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59.10.1007/BF02649604 ↗
14. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 988–95.10.1016/j.jallcom.2015.11.002 ↗
15. A. Devaux, L. Berglin, L. Thebaud, R. Delattre, C. Crozet, and O. Nodin: MATEC Web Conf., 2014, vol. 14, p. 01004.10.1051/matecconf/20141401004 ↗
16. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and A. Devaux: Sci. Rep., 2015, vol. 6, p. 28650.10.1038/srep28650 ↗
17. K. Teichmann, C.D. Marioara, S.J. Andersen, and K. Marthinsen: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4006–14.10.1007/s11661-012-1235-0 ↗
18. G. Trotter, G. Rayner, I. Baker, and P.R. Munroe: Intermetallics, 2014, vol. 53, pp. 120–28.10.1016/j.intermet.2014.04.018 ↗
19. L. Mataveli Suave, J. Cormier, P. Villechaise, A. Soula, Z. Hervier, D. Bertheau, and D. Laigo: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2963–82.10.1007/s11661-014-2256-7 ↗
20. Y. Mei, Y. Liu, C. Liu, and H. Li: J. Alloys Compd., 2015, vol. 649, pp. 949–60.10.1016/j.jallcom.2015.07.149 ↗
21. H. Yang, Z. Li, and M. Huang: Comput. Mater. Sci., 2013, vol. 75, pp. 52–59.10.1016/j.commatsci.2013.02.026 ↗
22. M.-A. Charpagne: Ph.D. Dissertation, CEMEF, Mines ParisTech, Paris, 2016.
23. D. Turnbull and R.E. Hoffman: Acta Metall., 1954, vol. 2, p. 419.10.1016/0001-6160(54)90061-9 ↗
24. J.W. Cahn: Acta Metall., 1957, vol. 5, pp. 169–72.10.1016/0001-6160(57)90021-4 ↗
25. Thermo-Calc, Nickel Base Superalloys database, Thermo-Calc Software, Solna, Sweden.
26. R. Doherty: Met. Sci., 1982, vol. 16, pp. 1–14.10.1179/030634582790427019 ↗
27. V. Randle and B. Ralph: Acta Metall., 1986, vol. 34, pp. 891–98.10.1016/0001-6160(86)90062-3 ↗
28. A.J. Porter: J. Mater. Sci., 1981, vol. 16, pp. 707–13.10.1007/BF02402788 ↗
29. H. Lia, F. Yea, T. Zhaoa, T. Caoa, F. Xub, Q. Xua, Y. Wangb, C. Chenga, and X. Mina: Mater. Sci. Eng., 2018, vol. 714A, pp. 172–78.10.1016/j.msea.2017.12.089 ↗
30. A. Seret, C. Moussa, M. Bernacki, N. Bozzolo, and J. Signorelli: J. Appl. Crystallogr., 2018, submitted for publication.
31. M. Doi and T. Miyazaki: Superalloys, TMS, Warrendale, PA, 1984.
32. M. Doi, D. Miki, T. Moritami, and T. Kozakai: Superalloys, TMS, Warrendale, PA, 2004.
33. D.W. Scott: Biometrika, 1979, vol. 66, pp. 605–10.10.1093/biomet/66.3.605 ↗
34. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗