journal article·2018-07

Enhancement of High Temperature Strength of 2219 Alloys Through Small Additions of Nb and Zr and a Novel Heat Treatment

S. Mondol, S. K. Makineni, S. Kumar, K. Chattopadhyay

Publisher page

Abstract

This paper presents a detailed investigation on the effect of small amount of Nb and Zr additions to 2219 Al alloy coupled with a novel three-stage heat treatment process. The main aim of the work is to increase the high temperature strength of 2219 alloy by introducing thermally stable L12 type ordered precipitates in the matrix as well as by reducing the coarsening of metastable strengthening θ″ and θ′ precipitates. To achieve this, small amounts of Nb and Zr are added to 2219 alloy melt and retained in solid solution by suction casting in a water-cooled copper mould having a cooling rate of 102 to 103 K/s. The suction cast alloy is directly aged at 673 K (400 °C) to form L12 type ordered coherent Al3Zr precipitates. Subsequently, the alloy is solution treated at 808 K (535 °C) for 30 minutes to get supersaturation of Cu in the matrix without significantly affecting the Al3Zr precipitates. Finally, the alloy is aged at 473 K (200 °C), which results in the precipitation of θ″ and θ′. Microstructural characterization reveals that θ″ and θ′ are heterogeneously precipitated on pre-existing uniformly distributed Al3Zr precipitates, which leads to a higher number density of these precipitates. This results in a significant increase in strength at room temperature as well as at 473 K (200 °C) as compared to the 2219 alloy. Furthermore, the alloy remains thermally stable after prolonged exposure at 473 K (200 °C), which is attributed to the elastic strain energy minimization by the conjoint Al3Zr/θ′ or Al3Zr/θ″ precipitates, and the high Zr and Nb solute-vacancy binding energy, retarding the growth and coarsening of θ″ and θ′ precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. E. Hornbogen, E.A. Starke Jr.: Acta. Metall. Mater., 1993, vol. 41, pp. 1-16.10.1016/0956-7151(93)90334-O ↗
2. J. W. Martin: Precipitation Hardening, second ed., Butterworth-Heinemann, Oxford, 1998.
3. K. E. Knipling, D. C. Dunand, D. N. Seidman: Z. Metallkd, 2006, vol. 97, pp. 246-265.10.3139/146.101249 ↗
4. K. E. Knipling, D. C. Dunand, D. N. Seidman: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2552-2563.10.1007/s11661-007-9283-6 ↗
5. K. E. Knipling, D. C. Dunand, D. N. Seidman: Microsc. Microanal., 2007, vol. 13, pp. 503–516.10.1017/S1431927607070882 ↗
6. S. Pogatscher, H. Antrekowitsch, M. Werinos, F. Moszner, S. S. A. Gerstl, M. F. Francis, W. A. Curtin, J. F. Löffler, P.J. Uggowitzer: Phys. Rev. Lett., 2014, vol. 112, pp. 225701-5.10.1103/PhysRevLett.112.225701 ↗
7. R. K. W. Marceau, G. Sha, R. Ferragut, A. Dupasquier, S. P. Ringer: Acta. Mater., 2010, vol. 58, pp. 4923-4939.10.1016/j.actamat.2010.05.020 ↗
8. B.A. Chen, L. Pan, R.H. Wang, G. Liu, P.M. Cheng, L. Xiao, J. Sun: Mater. Sci. Eng. A, 2011, vol. 530, pp. 607-617.10.1016/j.msea.2011.10.030 ↗
9. F. Wang, Z. Liu, D. Qiu, J.A. Taylor, M.A. Easton, M.-X. Zhang: Acta Mater., 2013, vol. 61, pp. 360–370.10.1016/j.actamat.2012.09.075 ↗
10. W. Feng, Q.I.U. Dong, Z. Liu, J. Taylor, M. Easton, M. Zhang: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 2034–2040.10.1016/S1003-6326(14)63309-4 ↗
11. M. Easton, D. Stjohn: Metall. Mater. Trans. A., 1999, vol. 30, pp. 1613–1623.10.1007/s11661-999-0098-5 ↗
12. B. S. Murty, S. A. Kori, and M. Chakraborty: Int. Mater. Rev., 2002, vol. 47, pp. 3-29.10.1179/095066001225001049 ↗
13. Y. Zhang, C. Bettles, P.A. Rometsch: J. Mater. Sci., 2013, vol. 49, pp. 1709–1715.10.1007/s10853-013-7856-x ↗
14. J. S. Vetrano, S. M. Bruemmer, and I. M. Robertson: MRS Online Proceedings Library Archive, 1995, 404.10.1557/PROC-404-177 ↗
15. J. S. Vetrano, S. M. Bruemmer, L. M. Pawlowski, and I. M. Robertson: Mater Sci Eng A, 1997, vol 238, pp101-107.10.1016/S0921-5093(97)00445-0 ↗
16. K. Kannan, J. S. Vetrano, and C. H. Hamilton: Metall. Mater. Trans. A., 1996, vol 27, pp 2947-2957.10.1007/BF02663844 ↗
17. J. Murray, A. Peruzzi, J. P. Abriata: J. phase equilibria, 1992, vol. 13 pp. 277-291.10.1007/BF02667556 ↗
18. K. E. Knipling, D. C. Dunand, D. N. Seidman: Acta Mater., 2008, vol. 56, pp. 114-127.10.1016/j.actamat.2007.09.004 ↗
19. M. S. Zedalis and M. E. Fine: Metall. Mater. Trans. A, 1986, vol 17, pp 2187-2198.10.1007/BF02645917 ↗
20. S. Z. Han, S. C. Chung, H. M. Lee: (1995). Metall. Mater. Trans. A, 1995, vol 26A, pp 1633–39.10.1007/BF02670751 ↗
21. V. R. Parameswaran, J. R. Weertman, and M. E. Fine: Scripta metal, 1989 vol 23, pp 147-150.10.1016/0036-9748(89)90109-9 ↗
22. K. E. Knipling, D. C. Dunand, D. N. Seidman: Acta Mater., 2008, vol. 56 pp. 1182-1195.10.1016/j.actamat.2007.11.011 ↗
23. E. Nes: Acta. Metall., 1972, vol. 20, pp. 499-506.10.1016/0001-6160(72)90005-3 ↗
24. R. Srinivasan: Acta Crystallography Sec. A, 1992, vol. 48 pp. 917-918.10.1107/S0108767392003714 ↗
25. K. S. Vecchio, D. B. Williams: Acta Metall., 1987, vol. 35 pp. 2959-2970.10.1016/0001-6160(87)90295-1 ↗
26. S. Srinivasan, P. B. Desch, R. B. Schwarz: Scripta metal mater, 1991, vol 25, pp 2513-2516.10.1016/0956-716X(91)90059-A ↗
27. K. E. Knipling, D. C. Dunand: Scripta Mater., 2008, vol. 59 pp. 387-390.10.1016/j.scriptamat.2008.02.059 ↗
28. L. F. Mondolfo: Aluminum alloys: Structure and properties, London-Boston Butter Worths & Co Ltd, 1976.10.1016/B978-0-408-70932-3.50008-5 ↗
29. C. Colinet, A. Pasturel, D. N. Manh, D. G. Pettifor, P. Miodownik: Phys. Rev. B, 1997, vol. 56, pp. 552-565.10.1103/PhysRevB.56.552 ↗
30. R. Vilar, O. Conde, S. Franco: Intermetallics, 1999, vol 7, pp 1227-1233.10.1016/S0966-9795(99)00025-4 ↗
31. A. B. Pandey: US patent, 2011, patent no. 8,002,912 B2.
32. E. Nes, and H. Billdal: Acta Metal., 1977, vol 25, pp 1039-1046.10.1016/0001-6160(77)90133-X ↗
33. M. S. Chuang, G. C. Tu: Scripta metal. mater., 1995, vol. 33, pp. 1999-2005.10.1016/0956-716X(95)00475-B ↗
34. Y. C. Chen, M. E. Fine, and J. R. Weertman: Acta Metal & Mater, 1990, vol. 38, pp 771-780.10.1016/0956-7151(90)90029-G ↗
35. M. S. Zedalis and M. E. Fine: Scripta Metal, 1983, vol.17, pp 1247-1251.10.1016/0036-9748(83)90293-4 ↗
36. M. S. Zedalis and M. E. Fine “ Metal Trans A, 1986, vol. 17, pp 2187-2198.10.1007/BF02645917 ↗
37. S. K. Makineni: Indian Institute of Science, Ph.D thesis, Bangalore, India 2015.
38. S. K. Makineni, S. Sugathan, S. Meher, R. Banerjee, S. Bhattacharya, S. Kumar, K. Chattopadhyay: Sci Rep., 2017. https://doi.org/10.1038/s41598-017-11540-2.10.1038/s41598-017-11540-2 ↗
39. S. K. Makineni, S Mondol, S. Suwas, S. Kumar, K. Chattopadhyay: Indian patent, WO2015121723 A1, 2015, US Patent 15/118670, 2016.
40. J. M. Galbraith, M. H. Tosten, P. R. Howell: J. Mater. Sci., 1987, vol. 3, pp. 2227-2236.
41. M. Kanno, B. Ou: Mater. Tarns. JIM, 1991, vol. 32, pp. 445-450.10.2320/matertrans1989.32.445 ↗
42. G. C. U. I. Q. Itoh, Q. Cui, M. Kanno: Mater Sci Eng A, 1996, vol 211, pp 128-137.10.1016/0921-5093(95)10157-8 ↗
43. L.M. Brown and R.K. Ham: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Wiley, New York, 1971.
44. A. W. Zhu, A. Csontos, E. A. Starke: Acta Mater., 1999, vol. 47, pp. 1713-1721.10.1016/S1359-6454(99)00077-4 ↗
45. J. F. Nie, B. C. Muddle: Acta Mater., 2008, vol. 56, pp. 3490-3501.10.1016/j.actamat.2008.03.028 ↗
46. D. L. Gilmore and E. A. Starke: J. Metall. Mater. Trans. A, 1997, vol. 28, pp. 1399-1415.10.1007/s11661-997-0203-6 ↗
47. G. E. Dieter: Mechanical metallurgy, third ed., McGraw Hill, New York, 1986.
48. M. Dixit, R. S. Mishra, K. K. Sankaran: Mater. Sci. Eng. A, 2008, vol. 478, pp.163-172.10.1016/j.msea.2007.05.116 ↗