journal article·2018-04

Effect of Prior Austenite Grain Size on the Morphology of Nano-Bainitic Steels

Kritika Singh, Avanish Kumar, Aparna Singh

Publisher page

Abstract

The strength in nanostructured bainitic steels primarily arises from the fine platelets of bainitic ferrite embedded in carbon-enriched austenite. However, the toughness is dictated by the shape and volume fraction of the retained austenite. Therefore, the exact determination of processing–morphology relationships is necessary to design stronger and tougher bainite. In the current study, the morphology of bainitic ferrite in Fe-0.89C-1.59Si-1.65Mn-0.37Mo-1Co-0.56Al-0.19Cr (wt pct) bainitic steel has been investigated as a function of the prior austenite grain size (AGS). Specimens were austenitized at different temperatures ranging from 900 °C to 1150 °C followed by isothermal transformation at 300 °C. Detailed microstructural characterization has been carried out using scanning electron microscopy and X-ray diffraction. The results showed that the bainitic laths transformed in coarse austenite grains are finer resulting in higher hardness, whereas smaller austenite grains lead to the formation of thicker bainitic laths with a large fraction of blocky type retained austenite resulting in lower hardness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1821–5.10.2355/isijinternational.43.1821 ↗
2. F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251–7.10.1016/j.cossms.2004.09.005 ↗
3. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2005, vol. 21, pp. 1293–302.10.1179/174328405X63999 ↗
4. C. García-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: Mater. Sci. Forum, 2005, vol. 500–501, pp. 495–502.10.4028/www.scientific.net/MSF.500-501.495 ↗
5. H.K.D.H. Bhadeshia: Proc. R. Soc. A Math. Phys. Eng. Sci., 2010, vol. 466, pp. 3–18.10.1098/rspa.2009.0407 ↗
6. C. GARCIA-MATEO and F.G. CABALLERO: ISIJ Int., 2005, vol. 45, pp. 1736–40.10.2355/isijinternational.45.1736 ↗
7. F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, and P. Brown: Mater. Sci. Technol., 2002, vol. 18, pp. 279–84.10.1179/026708301225000725 ↗
8. C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia: ISIJ Int., 2003, vol. 43, pp. 1238–43.10.2355/isijinternational.43.1238 ↗
9. H.-T. Chang, H.-W. Yen, W.-T. Lin, C.-Y. Huang, and J.-R. Yang: Int. Heat Treat. Surf. Eng., 2013, vol. 7, pp. 8–15.10.1179/1749514813Z.00000000048 ↗
10. A. Matsuzaki and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1999, vol. 15, pp. 518–22.10.1179/026708399101506210 ↗
11. F. Hu, P.D. Hodgson, and K.M. Wu: Mater. Lett., 2014, vol. 122, pp. 240–3.10.1016/j.matlet.2014.02.051 ↗
12. T. Jiang, H. Liu, J. Sun, S. Guo, and Y. Liu: Mater. Sci. Eng. A, 2016, vol. 666, pp. 207–13.10.1016/j.msea.2016.04.041 ↗
13. L. Yuan, Q. Liu, H. Li, and B. Gao: Met. Sci. Heat Treat., 2015, vol. 57, pp. 156–60.10.1007/s11041-015-9855-9 ↗
14. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd edn., Institute of materials, London, 2001.
15. C. García De Andrés, M.J. Bartolomé, C. Capdevila, D. San Martín, F.G. Caballero, and V. López: Mater. Charact., 2001, vol. 46, pp. 389–98.10.1016/S1044-5803(01)00142-5 ↗
16. L.C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11, pp. 874–82.10.1179/mst.1995.11.9.874 ↗
17. B.D. Cullity: Phys. Today, 1957, vol. 10, pp. 50–1.10.1063/1.3060306 ↗
18. T. Kaneshita, G. Miyamoto, and T. Furuhara: Acta Mater., 2017, vol. 127, pp. 368–78.10.1016/j.actamat.2017.01.035 ↗
19. H. Beladi, V. Tari, I.B. Timokhina, P. Cizek, G.S. Rohrer, A.D. Rollett, and P.D. Hodgson: Acta Mater., 2017, vol. 127, pp. 426–37.10.1016/j.actamat.2017.01.058 ↗
20. H.K.D.H. Bhadeshia and J.W. Christian: Metall. Trans. A., 1990, vol. 21(3), 767—797.10.1007/BF02656561 ↗
21. D.Q. Kong, Q.S. Liu, and Z.J. Dong: J. Iron Steel Res. Int., 2013, vol. 20, pp. 45–9.10.1016/S1006-706X(13)60068-0 ↗
22. L.C. Chang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1996, vol. 12, pp. 233–6.10.1179/mst.1996.12.3.233 ↗
23. G.R. Purdy and M. Hillert: Acta Metall., 1984, vol. 32, pp. 823–8.10.1016/0001-6160(84)90018-X ↗
24. C. García-Mateo and F.G. Caballero: Mater. Trans., 2005, vol. 46, pp. 1839–46.10.2320/matertrans.46.1839 ↗