journal article·2018-02

Effect of Cooling Rate on the Microstructure and Mechanical Properties of Cu/Al Bimetal Fabricated by Compound Casting

Guoping Liu, Qudong Wang, Li Zhang, Bing Ye, Haiyan Jiang, Wenjiang Ding

Publisher page

Abstract

Cu/Al bimetal was fabricated successfully by compound casting at different cooling rates in the range from 0.8 K/s to 1.83 K/s (0.8 °C/s to 1.83 °C/s). Interfacial cooling curve, microstructure evolution, bonding strength, and interfacial formation mechanism of Cu/Al bimetal were investigated simultaneously. Results show that the transition zone consists of the intermetallic compounds (IMCs) and the remelting zone. The IMCs are identified as Al4Cu9, AlCu, and Al2Cu, types of which are not affected by the cooling rate. The cooling rate primarily influences the thickness of IMCs, the microstructure of the remelting zone, and the morphology of the remelting zone/Al interface. The Cu/Al bimetal produced at the cooling rate of 1.02 K/s (1.02 °C/s) has relatively higher bonding strength than those at the cooling rates of 0.8 K/s and 1.83 K/s (0.8 °C/s and 1.83 °C/s). Shear fracture primarily occurs on the hard brittle IMCs rather than on the remelting zone. Based on the cooling curve and diffusion analysis, a new bonding mechanism of Cu/Al bimetal is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. T. Liu, Q. Wang, Y. Sui, Q. Wang and W. Ding: Mater. Des., 2016, vol. 89, pp. 1137-1146.10.1016/j.matdes.2015.10.072 ↗
2. V. Yousefi Mehr, M.R. Toroghinejad and A. Rezaeian: Mater. Des., 2014, vol. 53, pp. 174-181.10.1016/j.matdes.2013.06.028 ↗
3. R. Kocich, L. Kunčická, A. Macháčková and M. sofer: Mater. Des., 2017, vol. 123, pp. 137-146.10.1016/j.matdes.2017.03.048 ↗
4. W. Zhang, Y. Shen, Y. Yan and R. Guo: Mater. Sci. Eng.: A, 2017, vol. 690, pp. 355-364.10.1016/j.msea.2017.02.091 ↗
5. Y. Xiao, H. Ji, M. Li and J. Kim: Mater. Des., 2013, vol. 52, pp. 740-747.10.1016/j.matdes.2013.06.016 ↗
6. Y. Su, X. Liu, H. Huang, X. Liu and J. Xie: Metall. Mater. Trans. A, 2011, vol. 42, pp. 4088-4099.10.1007/s11661-011-0785-x ↗
7. S. Tavassoli, M. Abbasi and R. Tahavvori: Mater. Des., 2016, vol. 108, pp. 343-353.10.1016/j.matdes.2016.06.076 ↗
8. Y. Hu, Y. Chen, L. Li, H. Hu and Z. Zhu: Trans. Nonferr. Met. Soc. China, 2016, vol. 26, pp. 1555-1563.10.1016/S1003-6326(16)64261-9 ↗
9. Y. Tanaka and M. Kajihara: Mater. Trans., 2006, vol. 47, pp. 2480-2488.10.2320/matertrans.47.2480 ↗
10. Y. Tanaka, M. Kajihara and Y. Watanabe: Mater. Sci. Eng.: A, 2007, vol. 445-446, pp. 355-363.10.1016/j.msea.2006.09.047 ↗
11. Y. Tanaka and M. Kajihara: Mater. Sci. Eng.: A, 2007, vol. 459, pp. 101-110.10.1016/j.msea.2006.12.092 ↗
12. Q. Wang, D. Li, K. Wang, Z. Wang and J. He: Scripta Mater., 2007, vol. 56, pp. 485-488.10.1016/j.scriptamat.2006.11.026 ↗
13. D. Li, Q. Wang, T. Liu, G. Li and J. He: Mater. Chem. Phys., 2009, vol. 117, pp. 504-510.10.1016/j.matchemphys.2009.06.041 ↗
14. T. Wang, F. Cao, P. Zhou, H. Kang, Z. Chen, Y. Fu, T. Xiao, W. Huang and Q. Yuan: J. Alloy. Compd., 2014, vol. 616, pp. 550-555.10.1016/j.jallcom.2014.07.172 ↗
15. D. Moreno, J. Garrett and J. Embury: Intermetallics, 1999, vol. 7, pp. 1001-1009.10.1016/S0966-9795(99)00020-5 ↗
16. A.P. Savitskii: Mater. Sci. Forum, 2008, vol. 575-578, pp. 1477-1482.10.4028/www.scientific.net/MSF.575-578.1477 ↗
17. R. Chen, Y. Shi, Q. Xu and B. Liu: Trans. Nonferr. Met. Soc. China, 2014, vol. 24, pp. 1645-1652.10.1016/S1003-6326(14)63236-2 ↗
18. I.U. Haq, J.S. Shin and Z.H. Lee: Met. Mater. Int., 2004, vol. 10, pp. 89-96.10.1007/BF03027368 ↗
19. M. Pintore, T. Mittler, W. Volk, O. Starykov, and B. Tonn: Int. J. Met., 2017, pp. 1–10.
20. M. Faraji, J.P. Wright and L. Katgerman: Mater. Lett., 2010, vol. 64, pp. 1016-1018.10.1016/j.matlet.2010.01.028 ↗
21. Y. Han, L. Ben, J. Yao and C. Wu: Int. J. Miner. Metall. Mater., 2015, vol. 22, pp. 94-101.10.1007/s12613-015-1048-4 ↗
22. H. Xu, C. Liu, V.V. Silberschmidt, S.S. Pramana, T.J. White, Z. Chen and V.L. Acoff: Acta Mater., 2011, vol. 59, pp. 5661-5673.10.1016/j.actamat.2011.05.041 ↗
23. T.T. Sasaki, R.A. Morris, G.B. Thompson, Y. Syarif and D. Fox: Scripta Mater., 2010, vol. 63, pp. 488-491.10.1016/j.scriptamat.2010.05.010 ↗
24. J.L. Murray: Int. Met. Rev., 1985, vol. 30, pp. 211-234.10.1179/imr.1985.30.1.211 ↗
25. Y. Natsume, K. Ohsasa, Y. Tayu, T. Momono and T. Narita: ISIJ Int. 2003, vol. 43, pp. 1976-1982.10.2355/isijinternational.43.1976 ↗
26. W.D. Callister, Jr.: Materials Science and Engineering an Introduction, 7th ed., Wiley, New York, 2007, pp. 110–118.
27. Y.S. Lee, W.K. Kim, D.A. Jo, C.Y. Lim and H.W. Kim: Trans. Nonferr. Met. Soc. China, 2014, vol. 24, pp. 2226-2231.10.1016/S1003-6326(14)63337-9 ↗
28. M. Aravind, P. Yu, M.Y. Yau and H.L. Ng: Mater. Sci. Eng.: A, 2004, vol. 380, pp. 384-393.10.1016/j.msea.2004.04.013 ↗
29. B. Xiong, C. Cai and B. Lu: J. Alloy Compd., 2011, vol. 509, pp. 6700-6704.10.1016/j.jallcom.2011.03.142 ↗
30. K. Chen, W.J. Meng and J.A. Eastman: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3892-3906.10.1007/s11661-014-2339-5 ↗
31. J.P. Lokker, N.M. Pers, A.H. Verbruggen, G.C.A.M. Janssen, J.F. Jongste and S. Radelaar: J. Appl. Phys., 2000, vol. 87, pp. 682-688.10.1063/1.371926 ↗
32. H. Assadi, A.A. Shirzadi and E.R. Wallach: Acta Mater., 2001, vol. 49, pp. 31-39.10.1016/S1359-6454(00)00307-4 ↗