journal article·2017-10Open access

Modeling of the Coupling of Microstructure and Macrosegregation in a Direct Chill Cast Al-Cu Billet

Laurent Heyvaert, Marie Bedel, Miha Založnik, Hervé Combeau

Abstract

The macroscopic multiphase flow and the growth of the solidification microstructures in the mushy zone of a direct chill (DC) casting are closely coupled. These couplings are the key to the understanding of the formation of the macrosegregation and of the non-uniform microstructure of the casting. In the present paper we use a multiphase and multiscale model to provide a fully coupled picture of the links between macrosegregation and microstructure in a DC cast billet. The model describes nucleation from inoculant particles and growth of dendritic and globular equiaxed crystal grains, fully coupled with macroscopic transport phenomena: fluid flow induced by natural convection and solidification shrinkage, heat, mass, and solute mass transport, motion of free-floating equiaxed grains, and of grain refiner particles. We compare our simulations to experiments on grain-refined and non-grain-refined industrial size billets from literature. We show that a transition between dendritic and globular grain morphology triggered by the grain refinement is the key to the explanation of the differences between the macrosegregation patterns in the two billets. We further show that the grain size and morphology are strongly affected by the macroscopic transport of free-floating equiaxed grains and of grain refiner particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. M. Založnik, A. Kumar, H. Combeau, M. Bedel, P. Jarry, and E. Waz: Adv. Eng. Mater., 2011, vol. 13, pp. 570–80.10.1002/adem.201000341 ↗
2. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421–80.10.1016/j.pmatsci.2007.10.001 ↗
3. D.G. Eskin, R. Nadella, and L. Katgerman: Acta Mater., 2008, vol. 56, pp. 1358–65.10.1016/j.actamat.2007.11.021 ↗
4. L.C. Nicolli, A. Mo, and M. M’Hamdi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 433–42.10.1007/s11661-005-0314-x ↗
5. S.R. Wagstaff and A. Allanore: Metall. Mater. Trans. B, 2016, vol. 47B, pp. 1–7.
6. H. Combeau, M. Založnik, S. Hans, and P.E. Richy: Metall. Mater. Trans. B, 2009, vol. 40B, pp. 289–304.10.1007/s11663-008-9178-y ↗
7. M. Založnik and H. Combeau: in Model. Cast. Weld. Adv. Solidif. Process. XII, Steve L Cockroft and Daan M Maijer, eds., TMS, Warrendale (PA), USA, 2009, pp. 165–72.
8. A. Kumar, M. Založnik, and H. Combeau: Int. J. Adv. Eng. Sci. Appl. Math., 2011, vol. 2, pp. 140–48.10.1007/s12572-011-0034-y ↗
9. N. Leriche, H. Combeau, C.-A. Gandin, and M. Založnik: IOP Conf. Ser. Mater. Sci. Eng., 2015, vol. 84, art. no. 012087.10.1088/1757-899X/84/1/012087 ↗
10. H. Combeau, M. Založnik, and M. Bedel: JOM, 2016, vol. 68, pp. 2198–2206.10.1007/s11837-016-1993-z ↗
11. D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1965–76.10.1007/s11661-005-0059-6 ↗
12. R. Nadella, D.G. Eskin, and L. Katgerman: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 450–61.10.1007/s11661-007-9423-z ↗
13. T.L. Finn, M.G. Chu, and W.D. Bennon: in Micro/Macro Scale Phenomena in Solidification, C. Beckermann, L.A. Bertram, S.J. Pien, and R.E. Smelser, eds., ASME, New York, 1992, pp. 17–24.
14. C.J. Vreeman, J.D. Schloz, and M.J.M. Krane: J. Heat Transfer, 2002, vol. 124, p. 947–53.10.1115/1.1482089 ↗
15. B. Gariepy and Y. Caron: in Light Met. 1991, Elwin Rooy, ed., TMS, Warrendale (PA), USA, 1991, pp. 961–71.
16. A. Joly, G.-U. Grün, D. Daloz, H. Combeau, and G. Lesoult: Mater. Sci. Forum, 2000, vol. 329–330, pp. 111–20.10.4028/www.scientific.net/MSF.329-330.111 ↗
17. G. Lesoult, V. Albert, B. Appolaire, H. Combeau, D. Daloz, A. Joly, C. Stomp, G.-U. Grün, and P. Jarry: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 285–91.10.1016/S1468-6996(01)00055-9 ↗
18. D. Daloz, H. Combeau, A. Joly, G. Lesoult, G.-U. Grün, P. Jarry, and B. Commet: Materiaux 2002, SF2M, Tours, France, 2002, pp. 76–81.
19. A.M. Glenn, S.P. Russo, and P.J.K. Paterson: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1513–23.10.1007/s11661-003-0263-1 ↗
20. A. V Reddy and C. Beckermann: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 479–89.10.1007/s11663-997-0115-2 ↗
21. T. Jalanti, M. Swierkosz, M. Gremaud, and M. Rappaz: in DGM Conf., Frankfurt, Germany, 2000.
22. C.J. Vreeman, M.J.M. Krane, and F.P. Incropera: Int. J. Heat Mass Transf., 2000, vol. 43, pp. 677–86.10.1016/S0017-9310(99)00174-X ↗
23. M. Založnik and B. Šarler: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 85–91.10.1016/j.msea.2005.09.056 ↗
24. L. Zhang, D.G. Eskin, A. Miroux, T. Subroto, and L. Katgerman: Metall. Mater. Trans. B, 2012, vol. 33B, pp. 1–9.
25. Q. Du, D.G. Eskin, and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 180–89.10.1007/s11661-006-9042-0 ↗
26. A.V. Reddy and C. Beckermann: in Materials Processing in the Computer Age II, V.R. Voller, S.P. Marsh, and N. El-Kaddah, eds., TMS, 1995, pp. 89–102.
27. A. Håkonsen, D. Mortensen, S. Benum, and H.E. Vatne: in Light Metals 1999, E.C. Eckert, ed., TMS, Warrendale, PA, 1999, pp. 821–27.
28. M. Bedel, K.O. Tveito, M. Založnik, H. Combeau, and M. M’Hamdi: Comput. Mater. Sci., 2015, vol. 102, pp. 95–109.10.1016/j.commatsci.2015.01.028 ↗
29. M. Bedel, L. Heyvaert, M. Založnik, H. Combeau, D. Daloz, and G. Lesoult: IOP Conf. Ser. Mater. Sci. Eng., 2015, vol. 84, art. no. 012100.10.1088/1757-899X/84/1/012100 ↗
30. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
31. B. Appolaire, H. Combeau, and G. Lesoult: Mater. Sci. Eng. A, 2008, vol. 487, pp. 33–45.10.1016/j.msea.2007.11.030 ↗
32. M. Založnik and H. Combeau: Comput. Mater. Sci., 2010, vol. 48, pp. 1–10.10.1016/j.commatsci.2009.04.036 ↗
33. A.L. Greer, A.M. Bunn, A. Tronche, P. V Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
34. M. Rappaz and P. Thévoz: Acta Metall., 1987, vol. 35, pp. 1487–97.10.1016/0001-6160(87)90094-0 ↗
35. K.O. Tveito: Ph.D. Thesis, NTNU, Trondheim, Norway, 2017.
36. J. Lipton, M.E. Glicksman, and W. Kurz: Metall. Trans. A, 1987, vol. 18, pp. 341–45.10.1007/BF02825716 ↗
37. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1998.
38. Ø. Nielsen, B. Appolaire, H. Combeau, and A. Mo: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2049–60.10.1007/s11661-001-0017-x ↗
39. M. Ishii: Thermo-Flud Dynamic Theory of Two-Phase Flow, Eyerolles, Paris, 1975.
40. J. Ni and C. Beckermann: J. Mater. Process. Manuf. Sci., 1993, vol. 2, pp. 217–31.
41. G.H. Yeoh and J. Tu (2009) Computational Techniques for Multiphase Flows, Elsevier, Butterworth-Heinemann.
42. C.J. Vreeman, M.J.M. Krane, and J.D. Schloz: in Comput. Model. Mater. Miner. Met. Process., M Cross, J W Evans, and C Bailey, eds., TMS, Warrendale (PA), USA, 2001, pp. 397–409.
43. D.C. Weckman and P. Niessen: J. Electron. Mater., 1992, vol. 21, pp. 593–602.10.1007/BF02650017 ↗
44. A. Tronche: Ph.D. Thesis, University of Cambridge, 2000.
45. M. Založnik, A. Kumar, H. Combeau, M. Bedel, P. Jarry, and E. Waz: in Essential Readings in Light Metals Vol. 3, Cast Shop Aluminum Production, J.F. Grandfield and D.G. Eskin, eds., Wiley, Hoboken, NJ, 2013, pp. 848–53.10.1002/9781118647783.ch106 ↗
46. C. Lesaffre, V. Mineau, D. Picart, and H. Van Damme: C. R. Acad. Sci. IV, 2000, vol. 1, pp. 647–53.
47. C. Song, P. Wang, and H.A. Makse: Nature, 2008, vol. 453, pp. 629–32.10.1038/nature06981 ↗
48. I. Vušanović and M.J.M. Krane: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, art. no. 012069.10.1088/1757-899X/27/1/012069 ↗
49. K. Fezi, J. Coleman, and M.J.M. Krane: in Light Metals 2015, M. Hyland, ed., TMS, Warrendale, PA, 2015, pp. 871–75.10.1007/978-3-319-48248-4_146 ↗
50. R. Nadella, D.G. Eskin, and L. Katgerman: Mater. Sci. Forum, 2006, vol. 519–521, pp. 1841–46.10.4028/www.scientific.net/MSF.519-521.1841 ↗
51. M. Bedel: Ph.D. Thesis, Université de Lorraine, Nancy, France, 2014.
52. K.O. Tveito, M. Bedel, M. Založnik, H. Combeau, and M. M’Hamdi: IOP Conf. Ser. Mater. Sci. Eng., 2012, vol. 27, art. no. 012040.10.1088/1757-899X/27/1/012040 ↗
53. R. Ananth and W.N. Gill: J. Cryst. Growth, 1991, vol. 108, pp. 173–89.10.1016/0022-0248(91)90365-C ↗