journal article·2013-05Open access

Microstructure and Interfacial Reactions During Active Metal Brazing of Stainless Steel to Titanium

A. Laik, A. A. Shirzadi, R. Tewari, Anish Kumar, T. Jayakumar, G. K. Dey

Abstract

Abstract Microstructural evolution and interfacial reactions during active metal vacuum brazing of Ti (grade-2) and stainless steel (SS 304L) using a Ag-based alloy containing Cu, Ti, and Al was investigated. A Ni-depleted solid solution layer and a discontinuous layer of (Ni,Fe)2TiAl intermetallic compound formed on the SS surface and adjacent to the SS-braze alloy interface, respectively. Three parallel contiguous layers of intermetallic compounds, CuTi, AgTi, and (Ag,Cu)Ti2, formed at the Ti-braze alloy interface. The diffusion path for the reaction at this interface was established. Transmission electron microscopy revealed formation of nanocrystals of Ag-Cu alloy of size ranging between 20 and 30 nm in the unreacted braze alloy layer. The interdiffusion zone of β-Ti(Ag,Cu) solid solution, formed on the Ti side of the joint, showed eutectoid decomposition to lamellar colonies of α-Ti and internally twinned (Cu,Ag)Ti2 intermetallic phase, with an orientation relationship between the two. Bend tests indicated that the failure in the joints occurred by formation and propagation of the crack mostly along the Ti-braze alloy interface, through the (Ag,Cu)Ti2 phase layer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Shapiro A., Rabinkin A. (2003) . Weld. J. 83:36–43
2. Kundu S., Ghosh M., Laik A., Bhanumurthy K., Kale G.B., Chatterjee S. (2005) . Mater. Sci. Eng. A 407:36–4310.1016/j.msea.2005.07.049 ↗
3. Mudali U.K., Ananda Rao B.M., Shanmugam K., Nataraj R., Raj B. (2003) . J. Nucl. Mater. 321:40–4810.1016/S0022-3115(03)00194-6 ↗
4. He P., Zang J., Zhou R., Li X. (1999) . Mater. Charact. 43:287–9210.1016/S1044-5803(99)00008-X ↗
5. Orhan N., Khan T.I., Eroglu M. (2001) . Scripta Mater. 45:441–4610.1016/S1359-6462(01)01041-7 ↗
6. Lee J.G., Hong S.J., Lee M., Rhee C. (2009) . Scripta Mater. 395:145–49
7. Yue X., He P., Zhang J.C., Zhu F.Q. (2008) Mater. Charact. 59:1721–2710.1016/j.matchar.2008.03.014 ↗
8. A. Elrefaey and W. Tillmann: Weld. J., 2008, vol. 87, pp. 113s–18s
9. Lee J.G., Hong S.J., Lee M.K., Rhee C.K. (2009) . J. Nucl. Mater. 395:145–4910.1016/j.jnucmat.2009.10.045 ↗
10. He P., Yue X., Zhang J.H. (2008) . Mater. Sci. Eng. A 486:171–7610.1016/j.msea.2007.08.076 ↗
11. Ghosh M., Chatterjee S., Mishra B. (2003) . Mater. Sci. Eng. A 363:268–7410.1016/S0921-5093(03)00649-X ↗
12. Kurt B., Orhan N., Evin E., Calik A. (2007) . Mater. Lett. 61:1747–5010.1016/j.matlet.2006.07.123 ↗
13. Sidyakin V.A., Pechenkin D.K., Arbuzov V.M., Khaustov V.S. (2004) . Weld. Int. 18:977–9810.1533/wint.2004.3391 ↗
14. Qin B., Sheng G.M., Huang J.W., Zhou B., Qiu S.Y., Li C. (2006) . Mater. Charact. 56:32–3810.1016/j.matchar.2005.09.015 ↗
15. Kahraman N., Gulenc B., Findik F. (2005) . J. Mater. Proc. Technol. 169:127–3310.1016/j.jmatprotec.2005.06.045 ↗
16. A. Nobili, T. Masri, and M.C. Lafont: Proceedings of Reactive Metals in Corrosive Application Conference, Wah Chang, Albany, OR, 1999, pp. 89–98.
17. Akbulut H., Inal O.T., Zimmerly C.A. (1999) . J. Mater. Sci. 34:1641–5210.1023/A:1004588918869 ↗
18. Manikandan P., Hokamoto K., Deribas A.A., Raghukandan K., Tomoshige R.(2006) . Mater. Trans. 47:1071–8410.2320/matertrans.47.2049 ↗
19. B. Sabirov, J. Budagov, A. Sissakian, G. Shirkov, Y. Taran, G. Trubnikov, N. Dhanarai, M. Foley, E. Harms, D. Mitchell, S. Nagaitsev, W. Soyars, V. Rybakov, Y. Samarokov, Z. Zhigalov, A. Basti, and F. Bedeschi: 2012, arXiv:1201.3472v1 [physics.ins-det].
20. Dececco N.A., Parks J.N. (1953) . Weld. J. 32:1071–81
21. M.M. Schwartz: Brazing, ASM International, Materials Park, OH, 2003.
22. Elrefaey A., Tillmann W. (2007) . Metall. Mater. Trans. A 38A:2956–6210.1007/s11661-007-9357-5 ↗
23. Elrefaey A., Tillmann W. (2007) . J. Mater. Sci. 42:9553–5810.1007/s10853-007-1935-9 ↗
24. Elrefaey A., Tillmann W. (2009) . J. Alloys Compd. 487:639–4510.1016/j.jallcom.2009.08.029 ↗
25. Elrefaey A., Tillmann W. (2010) . J. Mater. Sci 45:4332–3810.1007/s10853-010-4357-z ↗
26. Lee J.G., Lee J.K., Hong S.M., Lee M.K., Rhee C.K. (2010) . J. Mater. Sci 45:6837–4010.1007/s10853-010-4923-4 ↗
27. Lee M.K., Lee J.G., Choi Y.H., Kim D.W., Rhee C.K., Lee Y.B., Hong S.J. (2010) . Mater. Lett. 64:1105–0810.1016/j.matlet.2010.02.024 ↗
28. Y. Flom: Brazing and Soldering 2012: Proc. 5th Int. Brazing and Soldering Conf., ASM International, Las Vegas, NV, 2012, pp. 125–28.
29. Y. Flom: Brazing and Soldering 2012: Proc. 5th Int. Brazing and Soldering Conf., ASM International, Las Vegas, NV, 2012, pp. 129–33.
30. J.L. Pouchou and F. Pichoir: Microbeam Analysis, San Francisco Press, San Francisco, CA, 1988, pp. 315–18.
31. Shirzadi A.A., Kocak M., Wallach E.R. (2004) . Sci. Technol. Weld. Join. 9:277–7910.1179/136217104225012210 ↗
32. O. Kubaschewski: Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschraft, Weinheim, 1988, vol. 1, pp. 557–62.
33. O. Kubaschewski: Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschraft, Weinheim, 1988, vol. 1, pp. 596–604.
34. Tas H., Lemaitre P., Dekeyser J., Vandermeulen W., Schutter F.D.(1991) . Fus. Eng. Design 14:321–2810.1016/0920-3796(91)90015-I ↗
35. Aiello A., Azzati M., Benamati G., Gessi A., Long B., Scaddozzo G. (2004) . J. Nucl. Mater 335:169–7310.1016/j.jnucmat.2004.07.011 ↗
36. O. Kubaschewski: in Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschraft, Weinheim, 1988, vol. 2, pp. 55–59.
37. O. Kubaschewski: in Landolt-Bornstein New Series, Springer, New York, NY, 2005, vol. IV/11C3, pp. 63–74.
38. B.P. Budberg: in Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschraft, Weinheim, 1988, vol. 8, pp. 7–21.
39. J.C. Schuster, Z. Pan, S. Liu, F. Weitzer, and Y. Du: Intermetallics, 2007, vol. 15, pp. 1257–67.10.1016/j.intermet.2007.03.003 ↗
40. Raghavan, V. (2009) . J. Phase Equilib. Differ. 30:77–7810.1007/s11669-008-9440-7 ↗
41. G. Ghosh: in Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH Verlagsgesellschraft, Weinheim, 1988, vol. 5, pp. 456–69.
42. G. Ghosh: in Landolt-Bornstein New Series, Springer, New York, NY, 2005, vol. IV (11A2), pp. 426–52.
43. R. Kainuma, K. Urushiyama, K. Ishikawa, C.C. Jia, I. Ohnuma, and K. Ishida: Mater. Sci. Eng., 1997, vols. 239–240, pp. 235–44.10.1016/S0921-5093(97)00587-X ↗
44. Yan X., Grytsiv A., Rogl P., Pomjakushin V., Schmidt H. (2008) . J. Phase Equilib. Differ. 29:414–2810.1007/s11669-008-9352-6 ↗
45. Liu C.C., Ou C.L., Shiue R.K. (2002) . J. Mater. Sci. 37:2225–3510.1023/A:1015356930476 ↗
46. M.Singleton and P. Nash: in: Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., ASM International, Materials Park, OH, 1990, pp. 64–66.
47. J. Swartzendruber: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., ASM International, Materials Park, OH, 1990, pp. 35–37.
48. Swalin R.A., Leak V.G. (1965) . Acta Metall. 13:471–7810.1016/0001-6160(65)90096-9 ↗
49. Kirkaldy J.S., Brown L.S. (1963) . Can. Metall. Q 2:89–11110.1179/000844363795165595 ↗
50. K.S. Kirkaldy and D.J. Young: Diffusion in the Condensed State, Institute of Metals, London, 1987, pp. 382–90.
51. J.E. Morral: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3462–70.10.1007/s11661-011-1026-z ↗
52. Shiue R.K., Wu S.K., Chan C.H. (2004) . J. Alloys Compd. 372:148–5710.1016/j.jallcom.2003.09.155 ↗
53. Tiner N.A. (1955) . Weld. J. 34:846–85
54. Ganjeh E., Sarkhosh H., Khorsand H., Sabet H., Dehkordi E.H., Ghaffari M. (2012) . Mater. Des. 39:33–4110.1016/j.matdes.2012.01.045 ↗
55. Caloni O., Ferrari A., Strocchi P. (1969) . Electrochim. Metall. 4:45–48.
56. J. Askill: Phys. Status Solidi, 1971, vol. 43, pp. K1–K2.10.1002/pssb.2220430147 ↗
57. Araki H., Yamane T., Minamino Y., Saji S., Hana Y., Jung S. (1994) . Metall. Mater. Trans. A, 25:874–7610.1007/BF02665465 ↗
58. J.L. Murray: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, eds., ASM International, Materials Park, OH, 1990, pp. 225–26.
59. Okamoto H. (2002) . J. Phase Equilib. 26:549–5010.1361/105497102770331307 ↗
60. Jaffee R.I. (1958) . Prog. Met. Phys. 7:65–16310.1016/0502-8205(58)90004-2 ↗
61. Holden F.C., Watts A.A., Ogden H.R., Jaffee R.I. (1955) . Trans. AIME 203:117–25
62. Bhaskaran T.A., Krishnan R.V., Ranganathan S. (1995) . Metall. Mater. Trans. A 26A:1367–7710.1007/BF02647587 ↗
63. Williams J.C., Taggart R., Polonis D.H. (1971) . Metall. Trans. A 2A:1139–4810.1007/BF02664246 ↗
64. Mukhopadhyay P., Menon S.K., Banerjee S., Krishnan R. (1979) .Metall. Trans. A 10A:1071–8410.1007/BF02811653 ↗
65. Yamaguchi M., Umakoshi Y. (1009) . Prog. Mater. Sci. 34:1–14810.1016/0079-6425(90)90002-Q ↗
66. Maloy S.A., Heuer A.H., Lewandowski J.J., Mitchell T.E. (1992) . Acta Metall. Mater. 40:3159–65.10.1016/0956-7151(92)90479-X ↗