Microstructure and Texture Evolution During Sub-Transus Thermo-Mechanical Processing of Ti-6Al-4V-0.1B Alloy: Part II. Static Annealing in (α + β) Regime
Source abstract
Abstract
The first part of this study describes the evolution of microstructure and texture in Ti-6Al-4V-0.1B alloy during sub-transus rolling vis-a-vis the control alloy Ti-6Al-4V. In the second part, the static annealing response of the two alloys at self-same conditions is compared and the principal micromechanisms are analyzed. Faster globularization kinetics has been observed in the Ti-6Al-4V-0.1B alloy for equivalent annealing conditions. This is primarily attributed to the α colonies, which leads to easy boundary splitting via multiple slip activation in this alloy. The other mechanisms facilitating lamellar to equiaxed morphological transformations, e.g., termination migration and cylinderization, also start early in the boron-modified alloy due to small α colony size, small aspect ratio of the α lamellae, and the presence of TiB particles in the microstructure. Both the alloys exhibit weakening of basal fiber (ND||〈0001〉) and strengthening of prism fiber (RD||〈 $$ 10\bar{1}0 $$ 〉) upon annealing. A close proximity between the orientations of fully globularized primary α and secondary α phases during α → β → α transformation has accounted for such a texture modification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. S. Roy and S. Suwas: Metall. Mater. Trans A, 2013. DOI: 10.1007/s11661-013-1672-4.10.1007/s11661-013-1672-4 ↗
2. G. Lütjering: Mater. Sci. Eng. A, 1998, vol. 243, pp. 32-45.10.1016/S0921-5093(97)00778-8 ↗
3. G. Lütjering: Mater. Sc. Eng. A, 1999, vol. 263, pp. 117-126.10.1016/S0921-5093(98)01169-1 ↗
4. M. Peters, G. Lütjering and G. Ziegler: Z. Metallkd., 1983, vol. 74, pp. 274-82.
5. N. Stefansson, S.L. Semiatin and D. Eylon: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3527-3534.10.1007/s11661-002-0340-x ↗
6. N. Stefansson and S.L. Semiatin: Metall. Mater. Trans. A, 2003, vol. 34, pp. 691-698.10.1007/s11661-003-0103-3 ↗
7. S.L. Semiatin, S.L. Knisley, P.N. Fagin, D.R. Barker and F. Zhang: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2377-2386.10.1007/s11661-003-0300-0 ↗
8. I. Weiss, F.H. Froes, D. Eylon and G.E. Welsch: Metall. Trans. A, 1985, vol. 17, pp. 1935-1947.
9. S.L. Semiatin, B.C. Kirby and G.A. Salishchev: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2809-2819.10.1007/s11661-004-0228-z ↗
10. R.L. Fullman: J. Metals, 1993, vol. 3, pp. 447-452.
11. S.L. Semiatin, V. Seetharaman and I. Weiss: Mater. Sci. Eng. A, 1999, vol. 263, pp. 257-271.10.1016/S0921-5093(98)01156-3 ↗
12. S. Suwas and A. K. Singh: Mater. Sci. Eng. A, 2003, vol. 355, pp. 331-37.10.1016/S0921-5093(03)00106-0 ↗
13. S. Suwas and A.K. Sing: Metal. Mater. Trans. A, 2004, vol. 35, pp. 925-38.10.1007/s11661-004-0017-8 ↗
14. S. Suwas, R.K. Ray, A. K. Singh and S. Bhargava: Acta Mater., 1999, vol. 47, pp. 4585-98.10.1016/S1359-6454(99)00327-4 ↗
15. S. Suwas, A. K. Singh, R.K. Ray and S. Bhargava: Scripta Mater., 1996, vol. 35, pp. 897-02.10.1016/1359-6462(96)00212-6 ↗
16. S. Suwas and R. K. Ray: Acta Mater., 1999, vol. 47, pp. 4599-14.10.1016/S1359-6454(99)00328-6 ↗
17. N.P. Gurao, A. A. Ali and S. Suwas: Mater. Sc. Eng. A, 2009, vol. 504, pp. 24-35.10.1016/j.msea.2008.11.053 ↗
18. H. Inagaki: Z. Metallkunde: 1990, vol. 81, pp. 433-45.
19. S. Roy, S. Suwas, S. Tamirisakandala, D.B. Miracle and R. Srinivasan: Acta Mater., 2011, vol. 59, pp. 5494-5510.10.1016/j.actamat.2011.05.023 ↗
20. S. Roy, V. Tungla and S. Suwas, Metall. Mater. Trans. A, 2011, vol. 42(9), pp. 2535-41.10.1007/s11661-011-0807-8 ↗
21. S. Roy and S. Suwas: Mater. Sc. Eng. A, 2012, vol. 540, pp. 152-63.10.1016/j.msea.2012.01.120 ↗
22. S. Roy and S. Suwas: J. Alloys Comp., 2013, vol. 548, pp. 110-125.10.1016/j.jallcom.2012.08.123 ↗
23. S. Zherebtsov, M. Murzinova, G. Salishchev and S.L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138-4150.10.1016/j.actamat.2011.03.037 ↗
24. G. Sharma, R.V. Ramanujan and G.P. Tiwari: Acta Mater., 2000, vol. 48, pp. 875-889.10.1016/S1359-6454(99)00378-X ↗
25. Y.L. Tian and R.W. Kraft: Metall. Trans. A, 1987, vol. 18, pp. 1403-14.10.1007/BF02646654 ↗
26. J.C.M. Kampe, T.H. Courtney and Y. Leng: Acta Metall., 1989, vol. 37, pp. 1735-1745.10.1016/0001-6160(89)90059-X ↗
27. M.F. Bartholomeusz and J.A. Wert: Metall. Mater. Trans. A, 1994, vol. 25, pp. 2371-2381.10.1007/BF02648857 ↗
28. T.H. Courtney and J.C.M. Kampe: Acta Metall., 1989, vol. 37, pp. 1747-1758.10.1016/0001-6160(89)90060-6 ↗
29. S. Mironov, M. Murzinova, S. Zherebtsov, G.A. Salishchev and S.L. Semiatin: Acta Mater., 2009, vol. 57, pp. 2470-2481.10.1016/j.actamat.2009.02.016 ↗
30. S.L Semiatin and T.R Bieler: Acta Mater., 2001, vol. 49, pp. 3565–73.10.1016/S1359-6454(01)00236-1 ↗
31. T.R. Bieler and S.L. Semiatin: Inter. J. Plast., 2002, vol. 18, pp. 1165-1189.10.1016/S0749-6419(01)00057-2 ↗
32. T.R. Bieler, M.G. Glavicic and S.L. Semiatin: J. Metals, 2002, vol. 54, pp. 31-36.
33. F. Cao, E.K. Cerreta, C.P. Trujillo and G.T. Gray III: Acta Mater., 2008, vol. 56, pp. 5804-5817.10.1016/j.actamat.2008.07.054 ↗
34. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. 392, pp. 403-414.10.1016/j.msea.2004.09.072 ↗
35. H. Feng, Y. Zhou, D. Jia and Q. Meng: Scripta Mater., 2006, vol. 55, pp. 667-670.10.1016/j.scriptamat.2006.07.006 ↗
36. S. Roy, A. Sarkar and S. Suwas: Mater. Sci. Eng. A 528 (2010) 449-458.10.1016/j.msea.2010.09.026 ↗
37. A. Sarkar, S. Roy and S. Suwas: Mater. Charact., 2011, vol. 62, pp. 35-42.10.1016/j.matchar.2010.10.007 ↗
38. S. Roy, S. Suwas, S. Tamirisakandala, R. Srinivasan and D.B. Miracle: Supplemental Proceedings TMS, 2009, vol. 3, pp. 63-70.
39. S.L. Semiatin, N. Stefansson and R.D. Doherty: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1372-1376.10.1007/s11661-005-0229-6 ↗
40. M. Peters and G. Luetjering: Titanium 80, H. Kimura, O. Izumi, Eds., Metallurgical Society of AIME, 1980, pp. 925–38.
41. Z.S. Zhu, J.L. Gu and N.P. Chen: Scripta Mater., 1996, vol. 34, pp. 1281-1286.10.1016/1359-6462(95)00659-1 ↗
42. A.W. Bowen: Mater. Sci. Eng. A, 1977, vol. 29, pp. 19-28.10.1016/0025-5416(77)90141-0 ↗
43. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi and P. Bocher: Acta Mater., 2008, vol. 56, pp. 4298-4308.10.1016/j.actamat.2008.04.065 ↗
44. M. Humbert, L. Germain, N. Gey, P. Bocher and M. Jahazi: Mater. Sci. Eng. A, 2006, vol. 430, pp. 157-164.10.1016/j.msea.2006.05.047 ↗
45. L. Germain, N. Gey, M. Humbert, P. Bocher, and M. Jahazi: Acta Mater., 2005, vol. 53, pp. 3535–43.10.1016/j.actamat.2005.03.043 ↗
46. A.A. Salem, M.G. Glavicic and S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. 494, pp. 350-359.10.1016/j.msea.2008.06.022 ↗