journal article·2013-06

An Atomistic-Based Hierarchical Multiscale Examination of Age Hardening in an Al-Cu Alloy

Chandra Veer Singh, Derek H. Warner

Publisher page

Abstract

A large class of modern structural alloys derives its strength from precipitation hardening. Precipitates obstruct the motion of dislocations and thereby increase alloy strength. This paper examines the process using an atomistic-based hierarchical multiscale modeling framework. Atomistic modeling is employed to (1) compute solute-dislocation interaction energies for input into a semi-analytic solute hardening model and (2) evaluate precipitate strengths for use in dislocation line tension simulations. The precipitate microstructure in the dislocation line tension simulations is obtained from simple analytic precipitation kinetics relations. Fitting only the rate constants in the precipitation kinetics model, the macroscopic strength predictions of the hierarchical multiscale model are found to correspond reasonably well with experiments. By analyzing the potential sources of discrepancy between the model’s macroscopic predictions and experiments, this work illuminates the importance of specific atomic-scale processes and highlights important challenges that remain before truly predictive mechanism-based plasticity modeling can be realized.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (96)

Show source-provided references
1. Wilm A. (1911) Metallurgie 8:225–27
2. Gayle F.W., Goodway M. (1994) Science 266:1015–1710.1126/science.266.5187.1015 ↗
3. Orowan E.Z. (1934) Phys. 89:63410.1007/BF01341480 ↗
4. Polanyi M.Z. (1934) Phys. 89:66010.1007/BF01341481 ↗
5. Taylor G.I. (1934) Proc. R. Soc. Lond. A, 145:362–8710.1098/rspa.1934.0106 ↗
6. Guinier A. (1939) Ann. Phys. 12:16110.1051/anphys/193911120161 ↗
7. Preston G.D. (1938) Phil. Mag. 26:85510.1080/14786443808562177 ↗
8. I. J. Polmear and H. K. Hardy: J. Inst. Met., 1952–1953, vol. 81, pp. 427–32
9. Hornbogen E. (2001) JJ. Light Met. 1:127–3210.1016/S1471-5317(01)00006-2 ↗
10. I. Polmear: Light Alloys: From Traditional Alloys to Nanocrystals, Butterworth-Heinemann, London, 2006
11. Liddicoat P.V., Liao X.-Z., Zhao Y., Zhu Y., Murashkin M.Y., Lavernia E.J., Valiev R.Z., Ringer S.P. (2010) Nat. Commun. 1:1–710.1038/ncomms1062 ↗
12. R.Z. Valiev, N.A. Enikeev, Murashkin, V.U. Kazykhanov, and X. Sauvage: Scripta Materialia, 2010, vol. 63, pp. 949–5210.1016/j.scriptamat.2010.07.014 ↗
13. A. Guinier: Heterogeneities in Solid Solutions, Vol. 9 of Solid State Physics, Elsevier, Amsterdam, 1959, pp. 293–398.10.1016/S0081-1947(08)60568-8 ↗
14. Hono K., Satoh T., Hirano K.-I. (1986) Philos. Mag. A 53:495–50410.1080/01418618608242848 ↗
15. Ringer S.P., Hono K. (2000) Mater. Charact. 44:101–3110.1016/S1044-5803(99)00051-0 ↗
16. Karlik M., Bigot A., Jouffrey B., Auger P., Belliot S. (2004) Ultramicroscopy 98:219–3010.1016/j.ultramic.2003.08.015 ↗
17. J.M. Silcock, T.J. Heal, and H.K. Hardy: J. Inst. Met., 1953–1954, vol. 82, pp. 239–48
18. N.F. Mott and F.R.N. Nabarro: Report on the Strength of Solids , The Physical Society, London, 1948, p. 1.
19. V. Gerold and H. Haberkorn: Phys. Stat. Solidi, 1996, vol. 16, p. 675.10.1002/pssb.19660160234 ↗
20. G. Knowles and P.M. Kelly: BSC/ISI Conference, Scarborough, The Iron and Steel Institute, London, 1971, p. 9
21. Nembach E. (1983) Phys. Stat. Solidi (a) 78:571–8110.1002/pssa.2210780223 ↗
22. Hirsch P. B., Kelly A. (1965) Phil. Mag. 12:88110.1080/14786436508228118 ↗
23. Kelly A., Nicholson R.B. (1963) Progr. Mater. Sci. 10:151–9110.1016/0079-6425(63)90010-0 ↗
24. Kelly A., Fine M.E. (1957) Acta Metallurgica 5:365–6710.1016/0001-6160(57)90003-2 ↗
25. Harkness S.D., Hren J.J. (1970) Metall. Trans. Am. Clin. Climatol. Assoc. 1:43–49
26. L.M. Brown and R.K. Ham: Strengthening Methods in Crystals, Applied Science Publishers, London, 1971, p. 9
27. Eto T. (1980) Scripta Metallurgica 14:13310.1016/0036-9748(80)90141-6 ↗
28. Muraishi S., Niwa N., Maekawa A., Kumai S., Sato A. (2002) Philos. Mag. A 82:2755–7110.1080/01418610208240064 ↗
29. Van Swygenhoven H., Derlet P.M. (2001) Phys. Revi. B 64:224105–910.1103/PhysRevB.64.224105 ↗
30. Rao S.I., Parthasarathy T.A., Dimiduk D.M., Hazzledine P.M. (2004) Phil. Mag. 84:3195–1510.1080/14786430412331284432 ↗
31. Dewald M.P., Curtin W.A. (2007) Modell. Simul. Mater. Sci. Eng. 15:193–9510.1088/0965-0393/15/1/S16 ↗
32. Zhu T., Li J., Samanta A., Kim H.G., Suresh S. (2007) PNAS 104:3031–3610.1073/pnas.0611097104 ↗
33. Osetsky Y.N., Bacon D.J. (2003) J. Nucl. Mater. 323:268–8010.1016/j.jnucmat.2003.08.028 ↗
34. Kohler C., Kizler P., Schmauder S. (2005) Model. Simul. Mater. Sci. Eng. 13:35–4510.1088/0965-0393/13/1/003 ↗
35. Shim J.-H., Cho Y.W., Kwon S.C., Kim W.W., Wirth B.D. (2007) Appl. Phys. Lett. 90:02190610.1063/1.2429902 ↗
36. Terentyev D., Bonny G., Malerba L. (2008) Acta Materialia 56:3229–35
37. Takahashi A., Ghoniem N.M. (2008) J. Mech. Phys. Solids 56:1534–5310.1016/j.jmps.2007.08.002 ↗
38. Singh C.V., Warner D.H. (2010) Acta Materialia 58:5797–5805
39. Singh C.V., Mateos A., Warner D.H. (2011) Scripta Materialia 64:398–40110.1016/j.scriptamat.2010.10.041 ↗
40. D.J. Bacon, Y.N. Osetsky, and D. Rodney: Dislocation-Obstacle Interactions at the Atomic Level, vol. 15, chap. 88, pp. 1–90, 200910.1016/S1572-4859(09)01501-0 ↗
41. Shercliff H., Ashby M. (1990) Acta Metallurgica et Materialia 38:1789–180210.1016/0956-7151(90)90291-N ↗
42. Schmauder S., Binkele P. (2002) Comput. Mater. Sci. 24:42–5310.1016/S0927-0256(02)00163-5 ↗
43. Starink M.J., Gao N., Davin L., Yan J., Cerezo A. (2005) Phil. Mag. 85:1395–1710.1080/14786430412331333374 ↗
44. G.E. Dieter: Mechanical Metallurgy, Materials Science and Engineering, 3rd ed., McGraw-Hill, New York, 1986
45. D. Hull and D. Bacon: Introduction to Dislocations, 4th edn., Butterworth-Heinemann, London, 200110.1016/B978-075064681-9/50002-X ↗
46. Kelchner C., Plimpton S., Hamilton J. (1998) Phys. Rev. B 58:11085–8810.1103/PhysRevB.58.11085 ↗
47. Li J. (2003) Modell. Simul. Mater. Sci. Eng. 11:173–7710.1088/0965-0393/11/2/305 ↗
48. Friedel J. (1956) Les Dislocations. Gauthier-Villars, Paris, France
49. Orowan E. (1984) Symposium on Internal Stresses in Metals and Alloys. Institute of Metals, London
50. Bacon D.J., Kocks U.F., Scattergood R.O. (1973) Phil. Mag. 28:1241–6310.1080/14786437308227997 ↗
51. Hirsch P.B. (1957) J. Inst. Met. 86:13–14
52. T. Hatano: Phys. Rev. B, 2006, vol. 74, pp. 020102+10.1103/PhysRevB.74.020102 ↗
53. Humphreys F.J., Hirsch P.B. (1970) Proc. R. Soc. Lond. A 318:73–9210.1098/rspa.1970.0134 ↗
54. Leyson G.P., Curtin W.A., Hector L.G., Woodward C.F. (2010) Nat. Mater. 9:750–5510.1038/nmat2813 ↗
55. Labusch R. (1970) Phys. Stat. Solidi (b) 41:659–6910.1002/pssb.19700410221 ↗
56. Labusch R. (1972) Acta Metallurgica 20:917–2710.1016/0001-6160(72)90085-5 ↗
57. Apostol F., Mishin Y. (2011) Phys. Rev. B 83:05411610.1103/PhysRevB.83.054116 ↗
58. Olmsted D., Hectorjr L., Curtin W. (2006) J. Mech. Phys. Solids 4:1763–8810.1016/j.jmps.2005.12.008 ↗
59. olverton C., Ozolins V. (2006) Phys. Revi. B 73:14410410.1103/PhysRevB.73.144104 ↗
60. Diak B., Saimoto S. (1997) Mater. Sci. Eng. A 234-236:1019–2210.1016/S0921-5093(97)00342-0 ↗
61. Mousa S.A., Bozarth J., Youssef A., Levine B., Diak B.J., Upadhyaya K.R., Saimoto S. (1998) Prog. Mater Sci. 43:223–6310.1016/S0079-6425(98)00007-3 ↗
62. Foreman A.J.E., Makin M.J. (1967) Canad. J. Phys. 45:511–1710.1139/p67-044 ↗
63. T. Nogaret and D. Rodney: Phys. Rev. B, 2006, vol. 74, pp. 134110+.10.1103/PhysRevB.74.134110 ↗
64. Z. Xu and R.C. Picu: Phys. Rev. B, 2007, vol. 76, pp. 094112+.10.1103/PhysRevB.76.094112 ↗
65. Dong Y., Nogaret T., Curtin W.A. (2010) Metall. Mater. Trans. A 41:1954–6010.1007/s11661-010-0229-z ↗
66. Binkele P., Schmauder S. (2003) Z. Metallkd 94:858–6310.3139/146.030858 ↗
67. Taylor G.I. (1938) J. Inst. Met. 62:307–24
68. G.I. Taylor: Proceedings of the Colloquium on Deformation and Flow of Solids (Madrid, 1955), Springer, Berlin, 1956, pp. 3–12
69. Stoller R.E., Zinkle S.J. (2000) J. Nucl. Mater. 283-287:349–5210.1016/S0022-3115(00)00378-0 ↗
70. Wang J., Wolverton C., Muller S., Liu Z., Chen L. (2005) Acta Materialia 53:2759–6410.1016/j.actamat.2005.02.035 ↗
71. Avrami M. (1939) J. Chem. Phys. 7:1103–1210.1063/1.1750380 ↗
72. J. Christian: The Theory of Phase Transformations in Metals and Alloys, Pergamon Press, Oxford, 3rd edn., 200210.1016/B978-008044019-4/50016-7 ↗
73. Hornbogen E. (1967) Aluminum 43:115–21
74. Massalski T. (1980) J. Phase Equilib. 1:27–33
75. Wagner C. (1961) Z. Elektrochem. 65:581–91
76. Nie J.F., Muddle B.C., Polmear I.J. (1996) Mater. Sci. Forum 217-222:1257–6210.4028/www.scientific.net/MSF.217-222.1257 ↗
77. J. Yan: Ph.D. Thesis, School of Engineering Sciences, University of Southampton, 2006
78. Starink M. (2004) Int. Mater. Rev. 49:191–2610.1179/095066004225010532 ↗
79. J. W. Martin: Precipitation Hardening, Butterworth-Heinemann, London, 2nd edn., 1998
80. Badini C., Marino F., Verne E. (1995) Mater. Sci. Eng. A 191:185–9110.1016/0921-5093(94)09637-C ↗
81. Smith G. (1998) Thermochim. Acta 317:7–2310.1016/S0040-6031(98)00361-X ↗
82. Bassani P., Gariboldi E., Vimercati G. (2007) J. Therm. Anal. Calorim. 87:247–5310.1007/s10973-006-7836-3 ↗
83. Ardell A. (1985) Metall. Trans. A 16A:2131–6510.1007/BF02670416 ↗
84. Argon A. (2007) Strengthening Mechanisms in Crystal Plasticity (Oxford Series on Materials Modelling). Oxford University Press, Oxford10.1093/acprof:oso/9780198516002.001.0001 ↗
85. T. Hatano and H. Matsui: Phys. Rev. B, 2005, vol. 72, pp. 094105+10.1103/PhysRevB.72.094105 ↗
86. Ney H., Labusch R., Haasen P. (1977) Acta Metallurgica 25:1257–6910.1016/0001-6160(77)90102-X ↗
87. Olmsted D.L., Hector Jr. L.G., Curtin W., Clifton R. (2005) Modell. Simul. Mater. Sci. Eng. 13:371–8810.1088/0965-0393/13/3/007 ↗
88. Hirth J., Lothe J. (1968) Theory of Dislocations. McGraw-Hill, New York
89. Nguyen L., Baker K., Warner D. (2011) Phys. Rev. B, 2011 84:02411810.1103/PhysRevB.84.024118 ↗
90. Warner D.H., Curtin W.A., Qu S. (2007) Nat. Mat. 6:876–8110.1038/nmat2030 ↗
91. Warner D., Curtin W. (2009) Acta Materialia 57:4267–7710.1016/j.actamat.2009.05.024 ↗
92. Trinkle D.R., Woodward C. (2005) Science 310:1665–6710.1126/science.1118616 ↗
93. Plimpton S.J. (1995) J. Comp. Phys. 117:1–1910.1006/jcph.1995.1039 ↗
94. M. S. Daw and M. I. Baskes: Phys. Rev. B, 1984, vol. 29, pp. 6443–5310.1103/PhysRevB.29.6443 ↗
95. Mishin Y., Mehl M., Papaconstantopoulos D. (2005) Acta Materialia 53:4029–4110.1016/j.actamat.2005.05.001 ↗
96. E. Nembach and G. Neite: Prog. Mat. Sci., 1985, vol. 29, pp. 177–31910.1016/0079-6425(85)90001-5 ↗