journal article·2013-07

Welding of Materials for Energy Applications

John N. DuPont, Suresh Babu, Stephen Liu

Publisher page

Abstract

Materials will play a critical role in power generation from both new and existing plants that rely on coal, nuclear, and oil/gas as energy supplies. High efficiency power plants are currently being designed that will require materials with improved mechanical properties and corrosion resistance under conditions of elevated temperature, stress, and aggressive gaseous environments. Most of these materials will require welding during initial fabrication and plant maintenance. The severe thermal and strain cycles associated with welding can produce large gradients in microstructure and composition within the heat-affected and fusion zones of the weld, and these gradients are commonly accompanied by deleterious changes to properties. Thus, successful use of materials in energy applications hinges on the ability to understand, predict, and control the processing–microstructure–property relations during welding. This article highlights some of the current challenges associated with fusion welding of materials for energy applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Welding Techniques and Residual Stresses · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. V. S. Arunachalam and E. L. Fleischer, MRS Bull., 2008, Vol. 33, pp. 264–76.10.1557/mrs2008.61 ↗
2. C. A. Powell and B. D. Morreale, MRS Bull., 2008, Vol. 33, pp. 309–15.10.1557/mrs2008.64 ↗
3. B. Raj, M. Vijayalakshmi, P. R. Vasudeva Rao, and K. B. S. Rao, MRS Bull., 2008, Vol. 33, pp. 327–37.10.1557/mrs2008.67 ↗
4. B. Hayman, J. Wedel-Heinen, and P. Brondsted, MRS Bull., 2008, Vol. 33, pp. 343–53.10.1557/mrs2008.70 ↗
5. D. Ginley, M. A. Green, and R. Collins, MRS Bull., 2008, Vol. 33, pp. 355–65.10.1557/mrs2008.71 ↗
6. M. Amin and J. Stringer, MRS Bull., 2008, Vol. 33, pp. 399–407.10.1557/mrs2008.80 ↗
7. M. S. Whittingham, MRS Bull., 2008, Vol. 33, pp. 411–19.10.1557/mrs2008.82 ↗
8. G. W. Crabtree and M. S. Dresselhaus: MRS Bull., 2008, Vol. 33, pp. 421–27.10.1557/mrs2008.84 ↗
9. B. C. Gates, G. W. Huber, C. L. Marshall, P. N. Ross, J. Siirola, and Y. Wong, MRS Bull., 2008, Vol. 33, pp. 429–35.10.1557/mrs2008.85 ↗
10. J. A. Carpenter Jr., J. Gibbs, A. A. Pesaran, L. D. Marlino, and K. Kelly, MRS Bull., 2008, Vol. 33, pp. 439–44.10.1557/mrs2008.86 ↗
11. J. C. Williams and E. A. Starke Jr., Acta Mater., 2003, Vol. 51, pp. 5775–99.10.1016/j.actamat.2003.08.023 ↗
12. J. X. Zhang, H. Harada, Y. Ro, Y. Koizumi and T. Kobayashi, Acta Mater., 2008, Vol. 56, pp. 2975–87.10.1016/j.actamat.2008.02.035 ↗
13. ULSAB-AVC: Body Structure Materials, Technical Transfer Dispatch No. 6, May 2001.
14. F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones and P. Brown: Mater. Sci. Technol., 2002, Vol. 18, pp. 279–84.10.1179/026708301225000725 ↗
15. T. Inoue, S. Torizuka and K. Nagai, Mater. Sci. Technol., 2001, Vol. 17, pp. 1329–38.10.1179/026708301101509520 ↗
16. R.C. Reed (2006) The Superalloys: Fundamental and Applications. Cambridge: Cambridge University Press.10.1017/CBO9780511541285 ↗
17. M. F. Ashby and Y. J. M. Brechet, Acta Mater., 2003, Vol. 51, pp. 5801–21.10.1016/S1359-6454(03)00441-5 ↗
18. L. Christodoulou and J. D. Venables, JOM, 2003, Vol. 55, pp. 39–45.10.1007/s11837-003-0008-z ↗
19. L. A. Momoda, Bridge Natl Acad. Eng. Publ., 2004, Vol. 34, pp. 18–21.
20. R.K. Rhein, M.D. Novakk, C.G. Levi and T.M. Pollock: Mater. Sci. Eng/ A, 2011, Vol. A528, pp. 3973–80.10.1016/j.msea.2011.02.011 ↗
21. S.J. Perez-Bergquist, N. Vermaak, T.M. Pollock: AIAA J., 2011, Vol. 49, pp. 1080–86.10.2514/1.J050815 ↗
22. A. Van der Velden: Engineous Software, GT 2007-27555, Proceedings of the ASME Turbo Expo, Montreal, 2007.
23. H. Almostaneer and D.L. Olson: In-Service Weld Repairs Using Metal Arc Welding Under Oil (MAW-UO) of Pipelines, Tanks, and Vessels, US Provisional Patent, EFS ID 8813384, Appl. # 61412295, Nov. 10th, 2010.
24. H. Almostaneer, S. Liu, and D. Olson: Proceedings of 30th International OMAE, June 19–24, Rotterdam, Netherlands, 2011.
25. AWS Handbook, vol. 4: Engineering Applications-Materials, 8th edition, American Welding Society, FL.
26. H. Almostaneer, C. Cadigan, S. Liu, D.L. Olson, R. Richards, and H.J. Liang: Sci. Technol. Weld. Joining, 2011, vol. 16 (7), pp. 619–29.10.1179/1362171811Y.0000000051 ↗
27. D.L. Olson and S. Liu: The Physical and Chemical Behavior of Steel Welding Consumables, Trends in Welding Research, 4th International Conference, June, 1995.
28. E.C. Pessoa, A.Q. Bracarense, E.M. Zica, S. Liu, F. Perez: J. Mater. Process. Technol. 179, pp. 239–43, 2006.10.1016/j.jmatprotec.2006.03.071 ↗
29. D.K. Matlock, G.R. Edwards, D.L. Olson, and S. Ibarra: in Underwater Welding, IIW Conference, Trondheim, Norway, Pergamon Press, New York, 1983, pp. 303–10.10.1016/B978-0-08-030537-0.50033-8 ↗
30. A. Sanchez-Osio, S. Liu, S. Ibarra, and D.L. Olson: ASME J. Offshore Mech. Arct. Eng., 117 (8), pp. 212–20, 1995.10.1115/1.2827092 ↗
31. S. Liu, D.L. Olson, J.S. Spencer, and C. Smith: “Underwater Welding of Marine Structures,” ABS/MMS/CSM, 350 pp, October 1995.
32. A. Sanchez and S. Liu: Weld. Res. Counc. Bull., 1995, vol. 399, 59 pp.
33. A.M. Pope, J.C.G. Teixeira, V.R. dos Santos, M.T.P. Paes, and S. Liu: ASME J. Offshore Mech. Arct. Eng., 118 (2), pp. 165–68, 1996.10.1115/1.2828827 ↗
34. F. Perez-Guerrero and S. Liu: Presented and Published in the Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering Conference—Material Symposium—Environmental Effects and Underwater Repair, Paper 29696, ASME/OMAE, San Diego, CA, 10–15 June 2007.
35. D.L. Olson, S. Liu and S. Ibarra: in ASM Materials Handbook on Welding, Brazing and Soldering, vol. 6, 10th edition, December 1993, pp. 1010–15.
36. E.C. Pessoa, A.Q. Bracarense, E.M. Zica, S. Liu, F. Perez, J. Mater. Process. Technol., 179(1–3), pp. 239–43, 2006.10.1016/j.jmatprotec.2006.03.071 ↗
37. Y. Suga and A. Hasui: Trans. Jpn. Weld. Soc., 1986, vol. 17 (1), pp. 58–64.
38. Kou S., Welding Metallurgy, 2nd Edition, John Wiley & Sons Inc., New York, 2003.
39. C.W. Ramsay, D.L. Olson, and D.K. Matlock: Proceedings of the Gatlinburg International Conference on “Recent Trends in Welding Research”, May 14–18, 1989, Metals Park, OH, 1990, pp. 763–68.
40. P.T. Oldland, C.W. Ramsay, D.K. Matlock, and D.L. Olson: Weld. J., 1989, 68 (4), 158s–68s (1989), addition 68 (6), p. 252s.
41. D.A. Fleming, A.Q. Bracarense, D.L. Olson, and S. Liu: Weld. J., 75 (6), pp. 171s–83s (1996).
42. W. Wang and S. Liu, Weld. J., 81(7), pp. 132s–45s, 2002.
43. N.V. Bangaru, D.P. Fairchild, M.L. Macia, J.Y. Koo, and A. Ozekcin: Proceedings of the International Pipeline Technology Conference, Ostend, Belgium, May 2004, pp. 789–808.
44. S. Liu and D.L. Olson: Conference of Proceedings of Molten Slags, Fluxes and Salts, Paper 247, Stockholm and Helsinki, June 12–16, 2000.
45. M. Matsushita and S. Liu: Weld. J., 79(10), pp. 295s–303s, 2000.
46. S. Liu, I. Maroef, D.L. Olson, and M. Matsushita: Conference of Proceedings of IIW Asian-Pacific Conference and WTIA Conference, Paper 10, Melbourne, Australia, October 29–November 4, 2000, 12 pp.
47. C.A. Lensing, Y.D. Park, I.S. Maroef, and D.L. Olson: Weld. J., vol. 83, pp 254s–66s (2004).
48. M.D. Clark and D.L. Olson: Proceedings of Hydrogen Management of High Strength Steel Welds, CANMET, Ottawa, ON, Canada, 1999, pp. 215–28.
49. S. Liu, C. Clasper, K. Moline, and J. Scott: Presented and published in the Proceedings of the 25th International Offshore Mechanics and Arctic Engineering Conference—Material Symposium—Performance of Reeled Pipes, Paper 92633, ASME/OMAE, Hamburg, Germany, 4–9 June 2006.
50. J.M. Ogden: Int. J. Hydrogen Energy, 1999, Vol. 24, pp. 709–30.10.1016/S0360-3199(98)00131-1 ↗
51. Abson D.J. and Pargeter, R.J.: Int. Mater. Rev., 1986, Vol. 31, pp. 141–94.10.1179/095066086790324302 ↗
52. Grong, O. and Matlock, D.K.: Int. Mater. Rev., 1986, Vol. 31, p. 27–48.10.1179/095066086790324186 ↗
53. M.A. Quintana, S.S. Babu, J. Major, and C. Dallam: 2010 8th International Pipeline Conference (IPC2010), September 27–October 1, 2010, Calgary, AB, Canada.
54. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A., 1995, Vol. 26A, pp. 3277–93.10.1007/BF02669455 ↗
55. R.W. Fonda and G. Spanos (2000) Metall. Mater. Trans. A., 31A: 2145–53.10.1007/s11661-000-0132-0 ↗
56. D. W. Moon, R. W. Fonda and G. Spanos: Weld. J., 2000, Vol. 79, pp. 278s–85s.
57. G. Spanos, D.W. Moon, R.W. Fonda, E.S.K. Menon and A.G. Fox: Metall. Mater. Trans. A, 2001, 32A:3043–54.10.1007/s11661-001-0179-6 ↗
58. S. S. Babu and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1990, Vol. 6, pp. 1005–20.10.1179/026708390790189605 ↗
59. S. S. Babu: Sci. Technol. Weld. Joining, 2011, Vol. 16, pp. 306–12.10.1179/1362171811Y.0000000019 ↗
60. M. Murugananth, S. S. Babu and S.A. David: Weld. J., 2004, 83, 267s–76s.
61. A. Ohta, Y. Maeda, N. Suzuki (2003) Q. J. Jpn. Weld. Soc. 21(4):603–09.10.2207/qjjws.21.603 ↗
62. F. Martinez Diez: PhD Thesis, supervised by Prof. Stephen Liu, Colorado School of Mines, 2003.
63. J. Self and D. Olson: PhD Thesis, supervised by Prof. David Olson, Colorado School of Mines, 1986.
64. J. Self, D.K. Matlock and D.L. Olson: Weld. J. 63, 1984, 282s-88s.
65. G. Ghosh and G.B. Olson: Acta Metall. Mater., 42, 1994, pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
66. G. Ghosh and G.B. Olson: Acta Metall. Mater., 42, 1994, pp. 3371–79.10.1016/0956-7151(94)90469-3 ↗
67. G. Ghosh and G.B. Olson: Acta Mater., 50, 2002, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
68. Ph.P. Darcis, H. Katsumoto, M.C. Payares-Asprino, S. Liu, and T.A. Siewert: Int. J. Fatigue Fract. Eng. Mater. Struct., 2007, vol. 31, pp. 125–36. DOI:10.1111/j.1460-2695.2007.01205.x.10.1111/j.1460-2695.2007.01205.x ↗
69. S. Liu: Keynote Publication in the Proceedings of the II International Conference on Welding and Joining of Materials, Cusco, Peru, 16–18 April 2007.
70. M.C. Payares-Asprino, H. Katsumoto, S. Liu: Weld. J., 87(11), pp. 279s–89s, 2008.
71. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov, and S.S. Babu (2011) Mater. Sci. Technol. 27(5):863–75.10.1179/174328409X433813 ↗
72. B. Hanhold, T. Lolla, G. Cola, S. Kelly, T. Palmer, and S.S. Babu: “Microstructure Evolution in Flash Processed (FP) Steel Welds,” AWS Annual Convention, November 2010.
73. H. K. D. H. Bhadeshia: ISIJ Int., 2001, Vol. 41, pp. 626–40.10.2355/isijinternational.41.626 ↗
74. J. M. Race and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 1992, Vol. 8, pp. 875–82.10.1179/026708392790169696 ↗
75. R. Viswanathan: Damage Mechanisms and Life Assessment of High Temperature Components, ASM International, 1989, 3rd Edition, 1995.10.31399/asm.tb.dmlahtc.9781627083409 ↗
76. I. Letofsky-Papst, F. Hofer, P. Warbichler, E. Letofsky and H. Cerjak: Micro-Characterization of Precipitates in 9–12% Cr-Steels Using EELS and EFTEM, Materials Week 2002, ICM-International Congress Centre Munich, 2002.
77. R. Viswanathan, K. Coleman, U. Rao: Int. J. Press. Vessels Pip., 2006, Vol. 83, pp. 778–83.10.1016/j.ijpvp.2006.08.006 ↗
78. H.K.D.H. Bhadeshia: Proceedings of Super-High Strength Steels, 2–4 November 2005, Rome, Italy, Associazione Italian di Metallurgica, pp. 1–10.
79. R.G. Baker and J. Nutting: J. Iron Steel Inst., 1959, pp. 257–69.
80. S. Liu, J.C. Madeni, D.L. Olson, R. Hellner, V. Petr, and K. Coleman: J. Energy Mater. Mater. Sci. Eng. Energy Syst., 2009, vol. 4 (2), pp. 51–60, DOI:10.1179/174892310X12811032099955.10.1179/174892310X12811032099955 ↗
81. J. Yu: Metall. Trans. A, 1989, Vol. 20A, pp. 1561–64.10.1007/BF02665512 ↗
82. J. A. Francis, W. Mazur and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2006, Vol. 22, pp. 1387–95.10.1179/174328406X148778 ↗
83. M.L. Santella: Unpublished Research, Oak Ridge National Laboratory, 2011.
84. X. Yu, S.S. Babu, and M.L. Santella: Unpublished Research, Oak Ridge National Laboratory and The Ohio State University, 2012.
85. S. Mohan, B. Narayanan, B. Schaeffer, and T. Melfi: Unpublished Research, The Ohio State University, Columbus, OH.
86. J. Storesund, K. Borggreen, W. L. Zang: Int. J. Press. Vessel Pip., 2006, Vol. 83, pp. 875–83.10.1016/j.ijpvp.2006.08.015 ↗
87. M.T. Whittaker and B. Wilshire: Mater. Sci. Technol., 2011, Vol. 27, pp. 642–47.10.1179/026708310X520529 ↗
88. A. Soula Y. Renollet, D. Boivin, J.L. Pouchou, D. Locq, P. Caron, and Y. Brechet: Mater. Sci. Eng. A, 2009, Vols. 510–511, pp. 301–06.10.1016/j.msea.2008.04.122 ↗
89. N. Biery, M. De Graef, and T.M. Pollock: Metall. Mater. Trans. A 2003, Vol. 34A, pp. 2301–12.10.1007/s11661-003-0294-7 ↗
90. M.A. Sutton, N. Li, D. Garcia, N. Cornille, J.J. Orteu, S.R. McNeill, H.W. Schreier, X. Li, and A.P. Reynolds: Exp. Mech, 2007, Vol. 47, pp. 775–87.10.1007/s11340-007-9042-z ↗
91. M.A.Sutton, N. Li, D. Garcia, N. Cornille, J.J. Orteu, S.R. McNeill, H.W. Schreier, X. Li, and A.P. Reynolds: Exp. Mech., 2007, Vol. 47, pp. 789–804.10.1007/s11340-007-9041-0 ↗
92. A. Soula, Y. Renollet, D. Boivin, J.L. Pouchou, D. Locq, P. Caron, and Y. Brechet: The Proceeding from Superalloys 2008, TMS, Warrendale, PA, 2008, pp. 387–93.10.7449/2008/Superalloys_2008_387_394 ↗
93. W. Tu and T.M. Pollock: The Proceeding from Superalloys 2008, TMS, Warrendale, PA, 2008, pp. 395–403.10.7449/2008/Superalloys_2008_395_403 ↗
94. J.N. DuPont: Int. Mater. Rev., 2012, vol. 57 (4), pp 208–34.10.1179/1743280412Y.0000000006 ↗
95. J.D. Parker, T. Byrne, and R. Dooley: Seminar on Dissimilar Welds in Fossil-Fired Boilers 3-73–3-109, 1984.
96. G.J. Brentrup, B.S. Snowden, J.N. DuPont, and J.L. Grenestedt: Weld. J., 2012, vol. 91 (9), pp 252s–259s.
97. G.J. Brentrup and J.N. DuPont: unpublished research, March 2012.
98. Gauman, M., Bezencon, C., Canalis, P., and Kurz, W: Acta Mater., 2001, 49: 1051–62.10.1016/S1359-6454(00)00367-0 ↗
99. Hunt, J. D. Mater. Sci. Eng. A, 1983, 65: 75–83.10.1016/0025-5416(84)90201-5 ↗
100. T.D. Anderson, J.N. DuPont, and T. DebRoy: Acta Mater., Vol. 58, 2010, pp. 1441–54.10.1016/j.actamat.2009.10.051 ↗