Evolution of Microstructure and Texture during Recrystallization of the Cold-Swaged Ti-Nb-Ta-Zr-O Alloy
Source abstract
Abstract
The deformed microstructure and evolution of microstructure and texture during recrystallization of the cold-swaged multifunctional Ti-23Nb-0.7Ta-2Zr-1.2O (TNTZO, at. pct) alloy were investigated by optical microscope, electron backscatter diffraction, and transmission electron microscope. This alloy has been reported, by Saito et al., to possess a specific dislocation-free plastic deformation mechanism. In this study, the results show a curly grain or swirled structure and a pronounced fibrous $$ {\left\langle {110} \right\rangle } $$ texture along the swaging axis in the cold-swaged TNTZO alloy. The normal to the swirled grain surface is near $$ {\left\langle {001} \right\rangle } $$ in the cross section of the rod. This characteristic microstructure can be considered to arise from the plane strain deformation of the grains under applied stress, which is similar to that in ordinary bcc metals after heavily drawing or swaging. It is also shown that recovery involves the redistribution and partial annihilation of dislocations within the deformation bands, and recrystallization proceeds by a typical new grain nucleation-growth mechanism during annealing of the TNTZO alloy. The fibrous $$ {\left\langle {110} \right\rangle } $$ deformation texture is gradually replaced by random orientations with increasing annealing time. Thus, it could be concluded that the TNTZO alloy deforms by the traditional dislocation glide on $$ {\left\langle {111} \right\rangle }{\left\{ {110} \right\}} $$ , {112}, or {123} slip systems, rather than the dislocation-free mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. T. Ahmed, M. Long, J. Silverstri, C. Ruiz, and H. Rack: Titanium 95’: Science and Technology, The Institute of Materials, London, 1996, pp. 1760–67
2. K. Wang, L. Gustavson, J. Dumbleton: Beta Titaniums in the 1990’s, TMS, Warrendale, PA, 1993, pp. 2697–2704
3. A. Mishra, J. Davidson, P. Kovacs, R. Poggie: Beta Titanium in the 1990’s, TMS, Warrendale, PA, 1993, pp. 61–72
4. D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, T. Yashiro: Mater. Sci. Eng. A-Struct., 1998, vol. 243, pp. 244–4910.1016/S0921-5093(97)00808-3 ↗
5. T. Saito, T. Furuta, J. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, T. Sakuma: Mater. Sci. Forum, 2003, vols. 426–432, pp. 681–8810.4028/www.scientific.net/MSF.426-432.681 ↗
6. T. Saito, T. Furuta, J. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, T. Sakuma: Science, 2003, vol. 300, pp. 464–6710.1126/science.1081957 ↗
7. S. Kuramoto, T. Furuta, J. Hwang, K. Nishino, T. Saito: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 657–6210.1007/s11661-006-0037-7 ↗
8. M. Gutkin, T. Ishizaki, S. Kuramoto, I. Ovid’ko: Acta Mater., 2006, vol. 54, pp. 2489–9910.1016/j.actamat.2006.01.027 ↗
9. T. Furuta, S. Kuramoto, J. Hwang, K. Nishino, T. Saito: Mater. Trans., 2005, vol. 46, pp. 3001–0710.2320/matertrans.46.3001 ↗
10. M. Hupalo, A. Padilha, H. Sandim, A. Kliauga: ISIJ Int., 2004, vol. 44, pp. 1894–190110.2355/isijinternational.44.1894 ↗
11. W. Hosford: Trans. TMS-AIME, 1964, vol. 230, pp. 12–15
12. W. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, Oxford, United Kingdom, 1993, pp. 115–18
13. Q.Y. Li: Handbook of Nonferrous Material Processing, Metallurgical Industry Press, Beijing, 1984, pp. 48–49 (in Chinese)
14. S.J. Li, Y.L. Hao, R. Yang, Y.Y. Cui, M. Niinomi: Mater. Trans., 2002, vol. 43, pp. 2964–6910.2320/matertrans.43.2964 ↗
15. F.M. Guclu, H. Cimenoglu, E.S. Kayali: Mater. Sci. Eng. C, 2006, vol. 26, pp. 1367–7210.1016/j.msec.2005.08.012 ↗