journal article·2015-10Open access

Three-Dimensional Characterization and Modeling of Microstructural Weak Links for Spall Damage in FCC Metals

Kapil Krishnan, Andrew Brown, Leda Wayne, Johnathan Vo, Saul Opie, Harn Lim, Pedro Peralta, Sheng-Nian Luo, Darrin Byler, Kenneth J. McClellan, Aaron Koskelo, Robert Dickerson

Abstract

Local microstructural weak links for spall damage were investigated using three-dimensional (3-D) characterization in multicrystalline copper samples (grain size ≈ 450 µm) shocked with laser-driven plates at low pressures (2 to 4 GPa). The thickness of samples and flyer plates, approximately 1000 and 500 µm respectively, led to short pressure pulses that allowed isolating microstructure effects on local damage characteristics. Electron Backscattering Diffraction and optical microscopy were used to relate the presence, size, and shape of porosity to local microstructure. The experiments were complemented with 3-D finite element simulations of individual grain boundaries (GBs) that resulted in large damage volumes using crystal plasticity coupled with a void nucleation and growth model. Results from analysis of these damage sites show that the presence of a GB-affected zone, where strain concentration occurs next to a GB, correlates strongly with damage localization at these sites, most likely due to the inability of maintaining strain compatibility across these interfaces, with additional effects due to the inclination of the GB with respect to the shock. Results indicate that strain compatibility plays an important role on intergranular spall damage in metallic materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Meyers, M.A. and Aimone, C.T.: Prog. Mater. Sci., 1983. 28: p. 1–96.10.1016/0079-6425(83)90003-8 ↗
2. Meyers, M.A., Dynamic Behavior of Materials. 1994, New York: John Wiley & Sons, Inc.10.1002/9780470172278 ↗
3. Minich, R.W., Cazamias, J.U., Kumar, M., and Schwartz, A.J.: Metall. Mater. Trans. A, 2004. 35A: p. 2663–73.10.1007/s11661-004-0212-7 ↗
4. Chen, X., Asay, J.R., Dwivedi, S.K., and Field, D.P.: J. Appl. Phys., 2006. 99: 02352810.1063/1.2165409 ↗
5. Wayne, L., Krishnan, K., DiGiacomo, S., Kovvali, N., Peralta, P., Luo, S.-N., Greenfield, S., Byler, D., Paisley, D., McClellan, K.J., Koskelo, A., and Dickerson, R.: Scripta mater., 2010. 63: p. 1065–68.10.1016/j.scriptamat.2010.08.003 ↗
6. Peralta, P., DiGiacomo, S., Hashemian, S., Luo, S.-N., Paisley, D.L., Dickerson, R., Loomis, E., Byler, D., McClellan, K.J., and D’Armas, H.: Int. J. Damage Mech., 2009. 18: p. 393-413.10.1177/1056789508097550 ↗
7. Escobedo, J.P., Dennis-Koller, D., Cerreta, E.K., Patterson, B.M., Bronkhorst, C.A., Hansen, B.L., Tonks, D., and Lebensohn, R.A.: J. Appl. Phys., 2011. 110(3): p. 033513.10.1063/1.3607294 ↗
8. Cerreta, E.K., Escobedo, J.P., Perez-Bergquist, A., Koller, D.D., Trujillo, C.P., Gray Iii, G.T., Brandl, C., and Germann, T.C.: Scripta Mater., 2012. 66(9): p. 638–41.10.1016/j.scriptamat.2012.01.051 ↗
9. Luo, S.-N., Germann, T.C., Tonks, D.L., and An, Q.: J. Appl. Phys., 2010. 108(9): p. 093526.10.1063/1.3506707 ↗
10. Han, W., An, Q., Luo, S., Germann, T., Tonks, D., and Goddard, W.: Phys. Rev. B, 2012. 85(2): 02410710.1103/PhysRevB.85.024107 ↗
11. Fensin, S.J., Valone, S.M., Cerreta, E.K., and Gray, G.T.: J. Appl. Phys., 2012. 112(8): p. 083529.10.1063/1.4761816 ↗
12. Fensin, S.J., Escobedo-Diaz, J.P., Brandl, C., Cerreta, E.K., Gray Iii, G.T., Germann, T.C., and Valone, S.M.: Acta Mater., 2014. 64(0): p. 113-122.10.1016/j.actamat.2013.11.026 ↗
13. Sutton, A.P. and Ballufi, R.W., Interfaces in Crystalline Materials. 1995, New York: Oxford University Press.
14. Cochran, S. and Banner, D.: J. Appl. Phys., 1977. 48: 272910.1063/1.324125 ↗
15. Follansbee, P.S. and Kocks, U.F.: Acta Metall., 1988. 36: p. 81-93.10.1016/0001-6160(88)90030-2 ↗
16. Steinberg, D.J., Cochran, S.G. and Guinan, M.W.: J. Appl. Phys., 1980. 51(3): p. 1498–504.10.1063/1.327799 ↗
17. Zerilli, F.J. and Armstrong, R.W.: J. Appl. Phys, 1987. 61: p. 1816–25.10.1063/1.338024 ↗
18. Gurson, A.L.: J. Eng. Mater. Technol., 1977. 99: p. 2-15.10.1115/1.3443401 ↗
19. Tvergaard, V. and Needleman, A.: Acta Metall., 1984. 32: p. 157–69.10.1016/0001-6160(84)90213-X ↗
20. Chaboche, J.L.: J.Appl. Mech., 1988. 55: p. 59-64.10.1115/1.3173661 ↗
21. Lemaitre, J. and Desmorat, R., Engineering Damage Mechanics: Ductile, Creep, Fatigue and Brittle Failures. 2005, Berlin: Springer-Verlag.
22. Czarnota, C., Jacques, N., Mercier, S., and Molinari, A.: J. Mech. Phys. Sol., 2008. 56: p. 1624–50.10.1016/j.jmps.2007.07.017 ↗
23. Wright, T.W. and Ramesh, K.T.: J. Mech. Phys. Sol., 2008. 56: p. 336–59.10.1016/j.jmps.2007.05.012 ↗
24. Becker, R.: Int. J. Plast., 2004. 20: p. 1983-2006.10.1016/j.ijplas.2003.09.002 ↗
25. Lukyanov, A.A.: Int. J. Plast., 2008. 24:140–6710.1016/j.ijplas.2007.02.009 ↗
26. Luscher, D.J., Bronkhorst, C.A., Alleman, C.N., and Addessio, F.L.: J. Mech. Phys. Sol., 2013. 61(9): p. 1877–94.10.1016/j.jmps.2013.05.002 ↗
27. Lloyd, J.T., Clayton, J.D., Austin, R.A., and McDowell, D.L.: J. Mech. Phys. Sol., 2014. 69: p. 14-32.10.1016/j.jmps.2014.04.009 ↗
28. Potirniche, G.P., Horstemeyer, M.F. and Ling, X.W.: Mech. Mater., 2007. 39: p. 941–52.10.1016/j.mechmat.2007.04.004 ↗
29. Vignjevic, R., Djordjevic, N., Campbell, J., and Panov, V.: Int. J. Impact Eng., 2012. 49: p. 61-76.10.1016/j.ijimpeng.2012.03.009 ↗
30. Clayton, J.D.: J. Mech. Phys. Sol., 2005. 53(2): p. 261-301.10.1016/j.jmps.2004.06.009 ↗
31. Vogler, T. and Clayton, J.: J. Mech. Phys. Sol., 2008. 56(2): p. 297-335.10.1016/j.jmps.2007.06.013 ↗
32. Jawad, F.F. and Zikry, M.A.: Int. J. Damage Mech., 2009. 18(4): p. 341–69.10.1177/1056789508097547 ↗
33. Peralta, P., Llanes, L., Bassani, J., and Laird, C.: Phil. Mag. A, 1994. 70(1): p. 219–32.10.1080/01418619408242547 ↗
34. Escobedo, J.P., Cerreta, E.K., Dennis-Koller, D., Trujillo, C.P., and Bronkhorst, C.A.: Phil. Mag., 2013. 93(7): p. 833–46.10.1080/14786435.2012.734638 ↗
35. Kocks, U.F.: Metall. Trans., 1970. 1: p. 1121–43.10.1007/BF02900224 ↗
36. Luo, S.-N., Peralta, P., Ma, C., Paisley, D.L., Greenfield, S.R., and Loomis, E.N.: Appl. Surf. Sci., 2007. 253: p. 9457–66.10.1016/j.apsusc.2007.06.012 ↗
37. T. Antoun, L. Seaman, D.R. Curran, G.I. Kanel, S.V. Razorenov, and A.V. Utkin: in High-Pressure Shock Compression of Condensed Matter, L. Davison and Y. Horie, eds., Springer-Verlag, New York, 2003.
38. Jones, O.E. and Motes, J.D.: J. Appl. Phys., 1969. 40(12): p. 4920–28.10.1063/1.1657314 ↗
39. Lee, E.H.: J. Appl. Mech., 1969. 36(1): p. 1–6.10.1115/1.3564580 ↗
40. Rice, J.R.:.J. Mech. Phys. Solids, 1971. 19: p. 433–55.10.1016/0022-5096(71)90010-X ↗
41. Bammann, D.J. and Aifantis, E.C.: Nucl. Eng. Des., 1989. 116: p. 355–62.10.1016/0029-5493(89)90095-2 ↗
42. Asaro, R.J.: Adv. Appl. Mech., 1983. 23: 1–115.10.1016/S0065-2156(08)70242-4 ↗
43. Staroselsky, A. and Cassenti, B.N.: Mech. Mater., 2010. 42(10): p. 945–59.10.1016/j.mechmat.2010.07.005 ↗
44. Belytschko, T., Liu, W.K., and Moran, B., Nonlinear Finite Elements for Continua and Structures. 2000, Chichester, England: Wiley.
45. ABAQUS Software, Abaqus Theory Manual, Dassault Systemes/Simulia, 2010.
46. Chu, C.C. and Needleman, A.: J. Eng. Mater. Technol., 1980. 102(3): p. 249–56.10.1115/1.3224807 ↗
47. Ortiz, M. and Molinari, A.: J. Appl. Mech., 1992. 59: p. 48-53.10.1115/1.2899463 ↗
48. Tong, W. and Ravichandran, G.: J. Appl. Mech., 1995. 62: 633–39.10.1115/1.2895993 ↗
49. Chin, G.Y. and Mammel, W.L.: Trans. Metall. Soc. AIME, 1967. 239: p. 1400-05.
50. Peralta, P. and Laird, C.: Acta mater., 1997. 45(12): p. 5129–43.10.1016/S1359-6454(97)00184-5 ↗