Depth Dependence of Nanoindentation Pile-Up Patterns in Copper Single Crystals
Source abstract
Abstract
Abstract A study of the dependence of nanoindentation pile-up patterns on the indentation load and crystallographic orientation is presented. Three different orientations—(001), (011), and (111)—of single crystal copper were investigated. Experiments were conducted on a CSM ultra-nanoindentation tester using a Berkovich tip. The topographic images were obtained using an atomic force microscope. The evolution of pile-up patterns with different applied loads was observed. The results show that for applied loads equal to 0.45 mN and smaller the pile-up patterns do not depend on the crystallographic orientation of the indented surface; instead, they depend on the tip’s geometry. On the other hand, in the case of indentation loads bigger than 2 mN, pile-up patterns on the surfaces of (001)-, (011)-, and (111)-oriented single crystals have fourfold, twofold, and sixfold (or threefold) symmetry, respectively. An intermediate state was also reported. Furthermore, a detailed analysis of residual impressions with maximal applied loads equal to 2 mN and bigger reveals that both pile-up and sink-in patterns are present.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Force Microscopy Techniques and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M.A.G. Maneiro and J. Rodriguez: Scripta Mater., 2005, vol. 52, pp. 593-598.10.1016/j.scriptamat.2004.11.029 ↗
2. A.B. Vangroenou and S.E. Kadijk: Acta Metall., 1989, vol. 37, pp. 2613-2624.10.1016/0001-6160(89)90294-0 ↗
3. Y. Wang, D. Raabe, C. Kluber and F. Roters: Acta Mater., 2004, vol. 52, pp. 2229-2238.10.1016/j.actamat.2004.01.016 ↗
4. Y. Liu, S. Varghese, J. Ma, M. Yoshino, H. Lu and R. Komanduri: Int. J. Plasticity, 2008, vol. 24, pp. 1990-2015.10.1016/j.ijplas.2008.02.009 ↗
5. N. Zaafarani, D. Raabe, R.N. Singh, F. Roters and S. Zaefferer: Acta Mater., 2006, vol. 54, pp. 1863-1876.10.1016/j.actamat.2005.12.014 ↗
6. N. Zaafarani, D. Raabe, F. Roters and S. Zaefferer: Acta Mater., 2008, vol. 56, pp. 31-42.10.1016/j.actamat.2007.09.001 ↗
7. O. Casals and S. Forest: Comp. Mater. Sci., 2009, vol. 45, pp. 774-782.10.1016/j.commatsci.2008.09.030 ↗
8. O. Casals, J. Ocenasek and J. Alcala: Acta Mater., 2007, vol. 55, pp. 55-68.10.1016/j.actamat.2006.07.018 ↗
9. Y.X. Gan, X. Chen and M.H. Zhao: J. Mech. Mater. Struct., 2008, vol. 3, pp. 1429-1445.10.2140/jomms.2008.3.1429 ↗
10. J. Alcala, D. Esque-de los Ojos, and J. Ocenasek: Philos. Mag., 2011, vol. 91, pp. 1050–69.10.1080/14786435.2010.488636 ↗
11. K.R. Narayanan, S. Subbiah and I. Sridhar: Appl. Phys. A-Mater., 2011, vol. 105, pp. 453-461.10.1007/s00339-011-6618-3 ↗
12. A. Zahedi, M. Demiral, A. Roy, V. Babitsky and V. Silberschmidt: Adv. Mater. Struct. IV, 2012, vol. 188, pp. 219-225.
13. C. Kearney, Z. Zhao, B.J.F. Bruet, R. Radovitzky, M.C. Boyce, and C. Ortiz: Phys. Rev. Lett., 2006, vol. 96, pp. 255505-1–5-4.10.1103/PhysRevLett.96.255505 ↗
14. S.P. Ju, C.T. Wang, C.H. Chien, J.C. Huang and S.R. Jian: Molecular Simulation, 2007, vol. 33, pp. 905-917.10.1080/08927020701392954 ↗
15. M. Yoshida, T. Sumomogi, T. Kino, M. Okumiya and Y. Tsunekawa: Journal of the J Jpn. I. Met., 2009, vol. 73, pp. 95-102.10.2320/jinstmet.73.95 ↗
16. T.B. Britton, H. Liang, F.P.E. Dunne and A.J. Wilkinson: P. Roy. Soc. Lond. A-Mat., 2010, vol. 466, pp. 695-719.10.1098/rspa.2009.0455 ↗
17. G. Xie, L. Wang, J. Zhang and L.H. Lou: Scripta Mater., 2012, vol. 66, pp. 378-381.10.1016/j.scriptamat.2011.11.037 ↗
18. A. Kravchuk, Z. Rymuza and D. Jarząbek: Int. J. Mater. Res., 2009, vol 100, 2009 pp. 933-935.10.3139/146.110135 ↗
19. Y.L. Chiu and A.H.W. Ngan, Acta Mater., 2002, vol. 50, pp. 2677-2691.10.1016/S1359-6454(02)00100-3 ↗
20. P.C. Wo, A.H.W. Ngan, and Y.L. Chiu: Scripta Mater., vol. 55, pp. 557–60.
21. S. Kucharski, S. Stupkiewicz, and H. Petryk: Exp. Mech., DOI:10.1007/s11340-014-9883-1.10.1007/s11340-014-9883-1 ↗
22. M. Rester, C. Motz and R. Pippan: Scripta Mater., 2008, vol. 59, pp. 742-745.10.1016/j.scriptamat.2008.06.003 ↗