journal article·2012-05Open access

On the Formation of a Diffusion Bond from Cold-Spray Coatings

Qiang Wang, Nick Birbilis, Ming-Xing Zhang

Abstract

To understand the development of diffusion bonding, which can increase the bonding strength, three different cold-sprayed coating/substrate systems were investigated, Ni/Cu, Cu/Cu, and Al/Mg, by annealing at increased temperatures for various times. The formation of intermetallic compounds in the Al/Mg system reduced the bonding strength dramatically. In Cu/Cu and Ni-Cu, diffusion bonds developed at lower temperatures as Ni-Cu forms an isomorphous system, which increased the bonding strength effectively. However, higher temperature annealing reduced bonding strength ultimately because of the Kirkendall pores.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Materials Engineering and Processing · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. H.Y. Lee, S.H. Jung, S.Y. Lee, Y.H. You, and K.H. Ko: Appl. Surf. Sci., 2005, vol. 252, pp. 1891–98.10.1016/j.apsusc.2005.03.148 ↗
2. H. Lee, Y. Yu, Y. Lee, Y. Hong, and K. Ko: J. Therm. Spray Technol., 2004, vol. 13, pp. 184–89.10.1361/10599630419355 ↗
3. Q. Wang, K. Spencer, N. Birbilis, and M.-X. Zhang: Surf. Coat. Technol., 2010, vol. 205, pp. 50–56.10.1016/j.surfcoat.2010.06.008 ↗
4. E. Irissou, J.-G. Legoux, B. Arsenault, and C. Moreau: J. Therm. Spray Technol., 2007, vol. 16, pp. 661–68.10.1007/s11666-007-9086-8 ↗
5. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets: Surf. Coat. Technol., 2002, vol. 154, pp. 237–52.10.1016/S0257-8972(02)00018-X ↗
6. K. Balani, A. Agarwal, S. Seal, and J. Karthikeyan: Scripta Mater., 2005, vol. 53, pp. 845–50.10.1016/j.scriptamat.2005.06.008 ↗
7. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye: Acta Mater., 2005, vol. 53, pp. 2991–3000.10.1016/j.actamat.2005.02.048 ↗
8. Q. Wang, N. Birbilis, and M.-X. Zhang: Mater. Lett., 2011, vol. 65, pp. 1576–78.10.1016/j.matlet.2011.03.035 ↗
9. P. Richer, B. Jodoin, and L. Ajdelsztajn: J. Therm. Spray Technol., 2006, vol. 15, pp. 246–54.10.1361/105996306X108174 ↗
10. L. Ajdelsztajn, B. Jodoin, P. Richer, E. Sansoucy, and E.J. Lavernia: J. Therm. Spray Technol., 2006, vol. 15, pp. 495–500.10.1361/105996306X146857 ↗
11. K. Kim, M. Watanabe, K. Mitsuishi, K. Iakoubovskii, and S. Kuroda: J. Phys. D-Appl. Phys., 2009, vol. 42, p. 5.
12. A. Hall, D. Cook, R. Neiser, T. Roemer, and D. Hirschfeld: J. Therm. Spray Technol., 2006, vol. 15, pp. 233–38.10.1361/105996306X108138 ↗
13. C. Borchers, T. Schmidt, F. Gärtner, and H. Kreye: Appl. Phys. A: Mater. Sci. Process., 2008, vol. 90, pp. 517–26.10.1007/s00339-007-4314-0 ↗
14. Y.K. Han, N. Birbilis, K. Spencer, M.X. Zhang, and B.C. Muddle: Mater. Charact., 2010, vol. 61, pp. 1167–86.10.1016/j.matchar.2010.07.011 ↗
15. K. Spencer, D.M. Fabijanic, and M.X. Zhang: Surf. Coat. Technol., 2009, vol. 204, pp. 336–44.10.1016/j.surfcoat.2009.07.032 ↗
16. E. Calla, D. McCartney, and P. Shipway: J. Therm. Spray Technol., 2006, vol. 15, pp. 255–62.10.1361/105996306X108192 ↗
17. W.-Y. Li, C.-J. Li, and H. Liao: J. Therm. Spray Technol., 2006, vol. 15, pp. 206–11.10.1361/105996306X108066 ↗
18. W.-Y. Li, C. Zhang, X. Guo, J. Xu, C.-J. Li, H. Liao, C. Coddet, and K.A. Khor: Adv. Eng. Mater., 2007, vol. 9, pp. 418–23.10.1002/adem.200700022 ↗
19. G.B. Gibbs: J. Nucl. Mater., 1966, vol. 20, pp. 303–06.10.1016/0022-3115(66)90042-0 ↗
20. Y. Funamizu and K. Watanabe: Trans. Jpn. Inst. Met., 1972, vol. 13, pp. 278–83.10.2320/matertrans1960.13.278 ↗
21. S.R. Shatynski, J.P. Hirth, and R.A. Rapp: Acta Metall., 1976, vol. 24, pp. 1071–78.10.1016/0001-6160(76)90023-7 ↗
22. M.X. Zhang, H. Huang, K. Spencer, and Y.N. Shi: Surf. Coat. Technol., 2010, vol. 204, pp. 2118–22.10.1016/j.surfcoat.2009.11.031 ↗
23. J.R. Davis: Copper and Copper Alloys, ASM International, New York, NY, 2001, pp. 51–53.
24. K. Spencer and M.-X. Zhang: Scripta Mater., 2009, vol. 61, pp. 44–47.10.1016/j.scriptamat.2009.03.002 ↗
25. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye: J. Appl. Phys., 2004, vol. 96, pp. 4288–92.10.1063/1.1789278 ↗
26. H. Yang, X. Guo, G. Wu, W. Ding, and N. Birbilis: Corros. Sci., 2011, vol. 53, pp. 381–87.10.1016/j.corsci.2010.09.047 ↗
27. I.D. Choi, D.K. Matlock, and D.L. Olson: Mater. Sci. Eng. A, 1990, vol. A124, pp. 15–18.10.1016/0921-5093(90)90161-U ↗
28. A. Kuper, H. Letaw, L. Slifkin Jr., E. Sonder, C.T. Tomizuka: Phys. Rev., 1954, vol. 96, pp. 1224–25.10.1103/PhysRev.96.1224 ↗
29. Y.C. Hsu and J.G. Duh: J. Electron. Mater., 2006, vol. 35, pp. 2164–71.10.1007/s11664-006-0327-2 ↗