journal article·2011-01Open access

Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method

M. Sistaninia, A. B. Phillion, J.-M. Drezet, M. Rappaz

Abstract

As a necessary step toward the quantitative prediction of hot tearing defects, a three-dimensional stress–strain simulation based on a combined finite element (FE)/discrete element method (DEM) has been developed that is capable of predicting the mechanical behavior of semisolid metallic alloys during solidification. The solidification model used for generating the initial solid–liquid structure is based on a Voronoi tessellation of randomly distributed nucleation centers and a solute diffusion model for each element of this tessellation. At a given fraction of solid, the deformation is then simulated with the solid grains being modeled using an elastoviscoplastic constitutive law, whereas the remaining liquid layers at grain boundaries are approximated by flexible connectors, each consisting of a spring element and a damper element acting in parallel. The model predictions have been validated against Al-Cu alloy experimental data from the literature. The results show that a combined FE/DEM approach is able to express the overall mechanical behavior of semisolid alloys at the macroscale based on the morphology of the grain structure. For the first time, the localization of strain in the intergranular regions is taken into account. Thus, this approach constitutes an indispensible step towards the development of a comprehensive model of hot tearing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J. Campbell: Mater. Sci. Technol., 1991, vol. 7, pp. 885-94.10.1179/mst.1991.7.10.885 ↗
2. T.W. Clyne and G.J. Davies: ICME, 1975, vol. 68, pp. 238-44.
3. T.W. Clyne, M. Wolf, and W. Kurz: Metall. Trans. B, 1982, vol. 13B, pp. 259-66.10.1007/BF02664583 ↗
4. J.A. Dantzig and M. Rappaz, eds.: Solidification, EPFL Press, Lausanne, Switzerland, 2009.10.1201/9781439808030 ↗
5. J.M. Drezet, O. Ludwig, M. M’Hamdi, H.G. Fjaer, and C.L. Martin: Light Metals, TMS, Warrendale, PA, 2004, pp. 655-60.
6. C.A. Monroe, C. Beckermann, and J. Klinkhammer: Modeling of Casting, Welding, and Advanced Solidification Processes—Xii, Eds. S.L. Cockcroft and D.M. Maijer, TMS, New York, NY, 2009.
7. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
8. O. Ludwig, J.M. Drezet, C. Martin, and M. Suéry: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1525-35.10.1007/s11661-005-0244-7 ↗
9. V. Mathier, J.M. Drezet, and M. Rappaz: Model Simul. Mater. Sci. Eng., 2007, vol. 15, pp. 121-34.10.1088/0965-0393/15/2/008 ↗
10. V. Mathier, S. Vernède, P. Jarry, and M. Rappaz: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 943-57.10.1007/s11661-008-9772-2 ↗
11. M. M’Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081-93.10.1007/s11661-002-0040-6 ↗
12. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349-61.10.1007/BF02651234 ↗
13. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 697-705.10.1007/s11663-001-0124-5 ↗
14. W.O. Dijkstra, C. Vuik, A.J. Dammers, and L. Katgerman: Solid Proc & Microst: Symp Hon, Eds. W. Kurz, M. Rappaz, C. Beckerman, and R. Trivedi, TMS, New York, NY, 2004, pp. 151-56.
15. S. Vernède and M. Rappaz: Acta Mater., 2007, vol. 55, pp. 1703-10.10.1016/j.actamat.2006.10.031 ↗
16. V. Mathier, A. Jacot, and M. Rappaz: Model Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 479-90.10.1088/0965-0393/12/3/009 ↗
17. S. Vernède, J.A. Dantzig, and M. Rappaz: Acta Mater., 2009, vol. 57, pp. 1554-69.10.1016/j.actamat.2008.12.006 ↗
18. S. Vernède, P. Jarry, and M. Rappaz: Acta Mater., 2006, vol. 54, pp. 4023-34.10.1016/j.actamat.2006.04.035 ↗
19. A.B. Phillion, S.L. Cockcroft, and P.D. Lee: Acta Mater., 2008, vol. 56, pp. 4328-38.10.1016/j.actamat.2008.04.055 ↗
20. A.B. Phillion, S.L. Cockcroft, and P.D. Lee: Model Simul. Mater. Sci. Eng., 2009, vol. 17, pp. 366-75.10.1088/0965-0393/17/5/055011 ↗
21. P.A. Cundall and O.D.L. Strack: Geotechnique, 1979, vol. 29, pp. 47-65.10.1680/geot.1979.29.1.47 ↗
22. Y.J. Sun and W.L. Xu: 15th Int. Conf. on Mechatronics and Machine Vision in Practice (M2vip), Auckland, New Zealand, 2008, pp. 201-07.10.1109/MMVIP.2008.4749533 ↗
23. K.M. Wright, J. Sprunt, A.C. Smith, and B.P. Hills: Int. J. Food Sci. Tech., 2003, vol. 38, pp. 351-60.10.1046/j.1365-2621.2003.00681.x ↗
24. P.A. Cundall: Proc. of the Institution of Civil Engineers-Geotechnical Engineering, 2001, vol. 149, pp. 41-47.10.1680/geng.2001.149.1.41 ↗
25. M.A. Delele, E. Tijskens, Y.T. Atalay, Q.T. Ho, H. Ramon, B.M. Nicolai, and P. Verboven: J. Food Eng., 2008, vol. 89, pp. 33-41.10.1016/j.jfoodeng.2008.03.026 ↗
26. G. Frenning: Comput. Meth. Appl. Mech. Eng., 2008, vol. 197, pp. 4266-72.10.1016/j.cma.2008.05.002 ↗
27. K. Han, D. Peric, A.J.L. Crook, and D.R.J. Owen: Eng. Computation, 2000, vol. 17, pp. 593-619.10.1108/02644400010339798 ↗
28. A. Munjiza and K.R.F. Andrews: Int. J. Num. Meth. Eng., 2000, vol. 49, pp. 1377-96.10.1002/1097-0207(20001220)49:11<1377::AID-NME6>3.0.CO;2-B ↗
29. H. Peron, J.Y. Delenne, L. Laloui, and M.S. El Youssoufi: Computers Geotechnics, 2009, vol. 36, pp. 61-69.10.1016/j.compgeo.2008.04.002 ↗
30. T.G. Sitharam: Curr. Sci., 2000, vol. 78, pp. 876-86.
31. A.B. Phillion, J.L. Desbiolles, and M. Rappaz: Modeling of Casting, Welding, and Advanced Solidification Processes—Xii, Vancouver, Canada, Eds. S. Cockcroft, D. Maijer, TMS, Warrendale, PA, 2009, pp. 353-60.
32. Abaqus: Abaqus Theory Manual Version 6.8-2, RI 02909-2499, 2008.
33. A.B. Phillion, S. Vernede, M. Rappaz, S.L. Cockcroft, and P.D. Lee: Int. J. Cast Met. Res., 2009, vol. 22, pp. 240-43.10.1179/136404609X367849 ↗
34. V.R. Voller and S. Sundarraj: Mater. Sci. Technol., 1993, vol. 9, pp. 474-81.10.1179/mst.1993.9.6.474 ↗
35. I. Farup, J.M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261-69.10.1016/S1359-6454(01)00013-1 ↗
36. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467-79.10.1007/s11661-003-0083-3 ↗
37. M. Rappaz, J.M. Drezet, P.D. Grasso, and A. Jacot: Modeling of Casting, Welding and Advanced Solidification Processes-X, Eds. D. Stefanescu, J. Waren, M. Jolly, and M. Krane, TMS, Warrendale, PA, 2003, pp. 53-60.
38. P. Van Houtte, A. Van Bael, and S. He: Proc. Of the 9th Int. Conf. on Numerical Methods in Industrial Forming Processes, 2007, pp. 159-64.10.1063/1.2740805 ↗
39. P. Van Houtte, A. Van Bael, and M. Seefeldt: 5th Int. Conf. on Processing & Manufacturing of Advanced Materials, Vancouver, Canada, 2006, pp. 3454-59.
40. P. Van Houtte, A. Van Bael, and M. Seefeldt: Fund. Deform. Anneal., 2007, vol. 550, pp. 13-22.
41. B. Magnin, L. Maenner, L. Katgerman, and S. Engler: Mater. Sci. Forum, 1996, vols. 217–222, pp. 1209-14.10.4028/www.scientific.net/MSF.217-222.1209 ↗
42. P. Wisniewski and H.D. Brody: Modeling of Casting, Welding, and Advanced Solidification Processes V, Eds. M. Rappaz, M.R. Ozgu, and K.W. Mahin, TMS, Warrendale, PA, 1991, pp. 273-78.
43. M. Sistaninia, A.B. Phillion, J.M. Drezet, and M. Rappaz: 49th Annual Conf. of Metallurgists, Vancouver, Canada, 2010.
44. S. Vernède: Ph.D. Dissertation, Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 2007.
45. D.G. Eskin and S.L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629-711.10.1016/S0079-6425(03)00037-9 ↗
46. W.M. van Haaften, W.H. Kool, and L. Katgerman: Mater. Sci. Eng. A, 2002, vol. 336, pp. 1-6.10.1016/S0921-5093(01)01987-6 ↗