Tensile Deformation Behavior of Duplex Stainless Steel Studied by In-Situ Time-of-Flight Neutron Diffraction
Source abstract
Abstract
For a duplex alloy being subjected to deformation, the different mechanical behaviors of its constituent phases may lead to a nonuniform partition of stresses between phases. In addition, the grain-orientation-dependent elastic/plastic anisotropy in each phase may cause grain-to-grain interactions, which further modify the microscopic load partitioning between phases. In the current work, neutron diffraction experiments on the spectrometer for materials research at temperature and stress (SMARTS) were performed on an austenite-ferrite stainless steel for tracing the evolution of various microstresses during tensile loading, with particular emphasis on the load sharing among grains with different crystallographic orientations. The anisotropic elastic/plastic properties of the duplex steel were simulated using a visco-plastic self-consistent (VPSC) model that can predict the phase stress and the grain-orientation-dependent stress. Material parameters used for describing the constitutive laws of each phase were determined from the measured lattice strain distributions for different diffraction {hkl} planes as well as the laboratorial macroscopic stress-strain curve of the duplex steel. The present investigations provide in-depth understanding of the anisotropic micromechanical behavior of the duplex steel during tensile deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. B. Leffler: Stainless Steels and Their Properties, Avesta Sheffield AB Research Foundation, Stockholm, 1996, pp. 30–1
2. J.W.L. Pang, T.M. Holden, and T.E. Mason: Acta Mater., 1998, vol. 46, pp. 1503–1810.1016/S1359-6454(97)00369-8 ↗
3. J.M. Atienza, J. Ruiz-Hervias, M.L. Martinez-Perez, F.J. Mompean, M. Garcia-Hernandez, and M. Elices: Scripta Mater., 2005, vol. 52, pp. 1223–2810.1016/j.scriptamat.2005.03.003 ↗
4. R. Lillbacka, G. Chai, M. Ekh, P. Liu, E. Johnson, and K. Runesson: Acta Mater., 2007, vol. 55, pp. 5359–6810.1016/j.actamat.2007.05.056 ↗
5. I. Alvarez-Armas, M.C. Marinelli, S. Hereñú, S. Degallaix, and A.F. Armas: Acta Mater., 2006, vol. 54, pp. 5041–4910.1016/j.actamat.2006.06.037 ↗
6. O. Düber, B. Künkler, U. Krupp, H.-J. Christ, and C.-P. Fritzen: Int. J. Fatigue, 2006, vol. 28, pp. 983–9210.1016/j.ijfatigue.2005.07.048 ↗
7. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–4510.1016/j.actamat.2004.08.016 ↗
8. D.G. Carr, M.I. Ripley, D.W. Brown, S.C. Vogel, and T.M. Holden: J. Nucl. Mater., 2006, vol. 359, pp. 202–0710.1016/j.jnucmat.2006.08.021 ↗
9. S. Harjo, Y. Tomota, and M. Ono: Acta Mater., 1998, vol. 47, pp. 353–6210.1016/S1359-6454(98)00300-0 ↗
10. I. Karaman, H. Sehitoglu, H.J. Maier, and Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3919–3310.1016/S1359-6454(01)00296-8 ↗
11. D. Dye, H.J. Stone, and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 1271–8310.1016/S1359-6454(01)00003-9 ↗
12. A. Baczmański, and C. Braham: Acta Mater., 2004, vol. 52, pp. 1133–4210.1016/j.actamat.2003.10.046 ↗
13. R. Dakhlaoui, A. Baczmański, C. Braham, S. Wroński, K. Wierzbanowski, and E.C. Oliver: Acta Mater., 2006, vol. 54, pp. 5027–3910.1016/j.actamat.2006.06.035 ↗
14. J.W. Hutchinson: Proc. R. Soc. London, 1976, vol. 348A, pp. 101–27
15. N. Jia, R. Lin Peng, Y.D. Wang, S. Johansson, and P.K. Liaw: Acta Mater., 2008, vol. 56, pp. 782–9310.1016/j.actamat.2007.10.040 ↗
16. M.A.M. Bourke, D.C.E. Dunand, and E. Üstündag: Appl. Phys. A, 2002, vol. 74, pp. 1707–0910.1007/s003390201747 ↗
17. A.C. Larson and R.B. Von Dreele: Los Alamos National Laboratory Report LAUR 86–748, Los Alamos National Laboratory, Los Alamos, NM, 2004, pp. 1–224
18. J. Eshelby: Proc. R. Soc. London, 1957, vol. 241A, pp. 376–96
19. J.W. Hutchinson: Proc. R. Soc. London, 1970, vol. 319A, pp. 247–72
20. U.F. Kocks, C.N. Tomé, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 467–70
21. C. Tome, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 1637–5310.1016/0001-6160(84)90222-0 ↗
22. N. Jia, R. Lin Peng, Y.D. Wang, G.C. Chai, S. Johansson, G. Wang, and P.K. Liaw: Acta Mater., 2006, vol. 54, pp. 3907–1610.1016/j.actamat.2006.04.019 ↗
23. G. Simmons, and H. Wang: Single Crystal Elastic Constants and Calculated Aggregate Properties: A Handbook, MIT Press, Cambridge, MA, 1971, pp. 1–370
24. H.M. Ledbetter: Phys. Status Solidi A, 1984, vol. 85, pp. 89–9610.1002/pssa.2210850111 ↗
25. R.L. Peng, Y.D. Wang, G.C. Chai, N. Jia, S. Johansson, and G. Wang: Mater. Sci. Forum, 2006, vols. 524–525, pp. 917–2210.4028/www.scientific.net/MSF.524-525.917 ↗