journal article·2014-03

Influence of Prior Warm Deformation on Cementite Spheroidization Process in a Low-Alloy Medium Carbon Steel

J. Arruabarrena, B. López, Jose M. Rodriguez-Ibabe

Publisher page

Abstract

Warm deformations have been applied to a low-alloy medium carbon steel (AISI 5140) to promote faster spheroidization during soft annealing treatments. The application of warm deformation leads to the fragmentation of cementite lamellae and the formation of defects on both cementite and the matrix. This induces faster lamellae break-up according to a boundary splitting mechanism, which is responsible for the improved spheroidization after annealing. The substructure developed in the matrix enhances pipe diffusion through the sub-boundaries, which helps the lamellae terminations to coarsen and causes lamellae fast splitting and finally yields a coarse cementite particle distribution. When deforming up to e = 0.3, almost fully spheroidized microstructures are obtained after annealing at 993 K (720 °C), independently of the initial pearlite features. By means of the EBSD technique, it has been observed that the applied warm deformation, in addition to enhancing the degree of spheroidization, allows a much finer microstructure to be formed after annealing. Grain refinement takes place as a consequence of a continuous recrystallization process, which is directly related to cementite spheroidization in the long term.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. J.M. O’Brien and W. F. Hosford: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1255-61.10.1007/s11661-002-0226-y ↗
2. E. Karadeniz: Mater. Des., 2008, vol. 29, pp. 251-56.10.1016/j.matdes.2006.11.015 ↗
3. S. Chattopadhyay and C.M. Sellars: Acta Metall., 1982, vol. 30, pp. 157-70.10.1016/0001-6160(82)90055-4 ↗
4. D. Hernandez-Silva, R.D. Morales and J.G. Cabañas-Moreno: ISIJ Int., 1992, vol. 32, pp. 1297-1305.10.2355/isijinternational.32.1297 ↗
5. H.L. Yi, Z.Y. Hou, Y.B. Xu, D. Wu and G.D. Wang: Scripta Mater., 2012, vol. 67, pp. 645-48.10.1016/j.scriptamat.2012.07.020 ↗
6. Ch. Zheng, L. Li, W. Yang and Z. Sun: Mater. Sci. Eng. A, 2012, vol. A558, pp. 158-61.10.1016/j.msea.2012.07.105 ↗
7. A. Saha, D.K. Mondal, K. Biswas and J. Maity: Mater. Sci. Eng. A, 2012, vol. A541, pp. 204-15.10.1016/j.msea.2012.02.026 ↗
8. N.V. Luzginova, L. Zhao and J. Sietsma: Metall. Mater Trans. A, 2008, vol. 39A, pp. 513-21.10.1007/s11661-007-9403-3 ↗
9. G. Krauss: Steel: Processing, Structure and Performance, ASM International, Materials Park, OH, 2005.
10. J.P. Ferrer, C. Capdevila, F.G. Caballero, and C. Garcia de Andres: International Conference on Advances in Materials and Materials Processing, 2006, pp. 500–06.
11. R. Song, D. Ponge, D. Raabe, J.G. Speer and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. A441, pp. 1-17.10.1016/j.msea.2006.08.095 ↗
12. L. Storojeva, R. Kaspar and D. Ponge: ISIJ Int., 2004, vol. 44, pp. 1211-16.10.2355/isijinternational.44.1211 ↗
13. N. Tsuji and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044-49.10.1016/j.scriptamat.2009.02.028 ↗
14. K. Handa, Y. Kimura, Y. Yasumoto, T. Kamioka and Y. Mishima: Mater. Sci. Eng. A, 2010, vol. A527, pp. 1926-32.10.1016/j.msea.2009.11.036 ↗
15. L. Storojeva, D. Ponge, R. Kaspar and D. Raabe: Acta Mater., 2004, vol. 52, pp. 2209-20.10.1016/j.actamat.2004.01.024 ↗
16. J. Arruabarrena, P. Uranga, B. López, and J.M. Rodriguez-Ibabe: MS&T ’11 Conference Proceedings, 2011, pp. 698–705.
17. Y.T. Wang, Y. Adachi, K. Nakajima and Y. Sugimoto: Acta Mater., 2010, vol. 58, pp. 4849-58.10.1016/j.actamat.2010.05.023 ↗
18. Y.L. Tian and R. W. Kraft: Metall. Trans., 1987, vol. 8A, pp. 1403-14.10.1007/BF02646654 ↗
19. G. Sharma, R.V. Ramanujan and G.P. Tiwari: Acta Mater., 2000, vol. 48, pp. 875-89.10.1016/S1359-6454(99)00378-X ↗
20. E. Werner: Acta Metall., 1989, vol. 37, pp. 2047-53.10.1016/0001-6160(89)90090-4 ↗
21. S. Chattopadhyay and C.M. Sellars: Metallography, 1977, vol. 10, pp. 89-105.10.1016/0026-0800(77)90044-1 ↗
22. J.C. Malzahn Kampe, T.H. Courtney and Y. Leng: Acta Met., 1989, vol. 37, pp. 1735-45.10.1016/0001-6160(89)90059-X ↗
23. N. Isasti, D. Jorge-Badiola, M.L. Taheri, B. Lopez and P. Uranga: Metall. Mater Trans. A, 2011, vol. 42A, pp. 3729-42.10.1007/s11661-011-0624-0 ↗
24. W.J. Nam and C.M. Bae: Scripta Mater. 1999, vol. 41, pp. 313-18.10.1016/S1359-6462(99)00168-2 ↗
25. V.G. Gavriljuk: Mater. Sci. Eng. A, 2003, vol. A345, pp. 81-89.10.1016/S0921-5093(02)00358-1 ↗
26. ASTM F2282-03: Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners, ASTM International.
27. K. Aihara and S. Kanbara: The Sumitomo Search, 1990, vol. 42, pp. 1–8.
28. M. Calcagnotto, D. Ponge, Y. Adachi and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658-70.10.1016/j.actamat.2010.10.002 ↗
29. ICFG document No 11/01: Steels for Cold Forging-Their Behavior and Selection, Meisenbach Verlag, ISBN 3-87525-148-2, Bamberg, 2001.
30. J.M. Rodriguez-Ibabe: Mater. Sci. Forum, 1998, vol. 284–286, pp. 51-62.10.4028/www.scientific.net/MSF.284-286.51 ↗