journal article·2001-10

Influence of stepped austempering process on the fracture toughness of austempered ductile iron

Cheng-Hsun Hsu, Tao-Liang Chuang

Publisher page

Abstract

This research studied the effect of a two-step austempering process on the fracture toughness of ductile iron and compared it to that of the conventional upper- and lower-ausferrite austempered ductile irons (ADIs). The results showed that such a two-step austempering heat-treatment process yielded a fracture-toughness value equivalent to that of the upper-ausferrite ADI, while the hardness was maintained at the level of lower-ausferrite ADI. This provided a unique combination of high toughness with good hardness (strength) properties for the ADI with a two-step austempering. Optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction analysis were performed to correlate the properties attained to the microstructural features.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. B.V. Kovacas: Modern Casting, 1990, vol. 3, pp. 38–41.
2. K.B. Rundrnan, D.J. Moore, K.L. Hayrynen, W.J. Dubensky, and T.N. Rouns: J. Heat Treatment, 1988, vol. 5 (2), pp. 79–95.10.1007/BF02833175 ↗
3. J.F. Janowak and R.B. Gundlach: AFS Trans., 1983, pp. 377–87.
4. A. Owhadi, J. Hedjazi, and P. Davami: Mater. Sci. Technol., 1998, vol. 14, pp. 245–50.10.1179/mst.1998.14.3.245 ↗
5. Y.S. Lerner and G.R. Kingsbury: JMEPEG, 1998, vol. 7, pp. 48–52.10.1361/105994998770348034 ↗
6. B.V. Kovacas: AFS Trans., 1991, pp. 281–86.
7. B.V. Kovacas: AFS Trans., 1994, pp. 417–20.
8. ASTM A644, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1992, pp. 341–42.
9. S.C. Lee, C.H. Hsu, C.C. Chang, and H.P. Feng: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2511–21.10.1007/s11661-998-0223-x ↗
10. A.S. Hamid and R. Elliott: Mater. Sci. Technol., 1996, vol. 12, pp. 674–90.
11. K.B. Rundrnan, D.J. Moore, and T.N. Rouns: J. Heat Treatment, 1998, vol. 15 (2), pp. 79–88.
12. M.N. Ahmadabadi: Metall. Mater. Trans. A, 1998. vol. 29A, pp. 2297–2306.10.1007/s11661-998-0107-0 ↗
13. H. Bayati, R. Elliott, and G.W. Lorimer: Mater. Sci. Technol., 1995, vol. 11, pp. 1007–13.10.1179/mst.1995.11.10.1007 ↗
14. M.N. Ahamadabadi, E. Niyama, and T. Ohide: AFS Trans., 1994, pp. 269–78.
15. ASTM E399, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1990, pp. 506–36.
16. T.S. Shih, C.H. Chang, and Z.D. Ou: AFS Trans., 1993, pp. 857–72.
17. N. Darwish and R. Elliott: Mater Sci. Technol., 1993, vol. 9, pp. 572–85.10.1179/mst.1993.9.7.572 ↗
18. D.J. Moore, T.N. Rouns, and K.B. Rundrnan: AFS Trans., 1988, pp. 255–64.
19. B.D. Cullity: Elements of X-ray Diffraction, Addison-Wesley Publishing Company, Reading, MA, 1978, pp. 411–7.
20. K.B. Rundrnan and K.C. Kluy: AFS Trans., 1982, pp. 499–508.
21. C.H. Hsu, S.C. Lee, M.P. Feng, and Y.H. Shy: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 295–303.10.1007/s11661-001-0261-0 ↗