journal article·2015-02

Effects of Temperature on the Hardness and Wear Resistance of High-Tungsten Stellite Alloys

Rong Liu, X. J. Wu, Samit Kapoor, M. X. Yao, Rachel Collier

Publisher page

Abstract

In this research, two new Stellite alloys containing high tungsten are developed for wear resistance application owing to the distinct beneficial effects of tungsten in Stellite alloys. The microstructures of these alloys are analyzed using a scanning electron microscope (SEM) with an EDAX energy dispersive X-ray (EDX) spectroscopy system and X-ray diffraction spectrum. The micro-hardness and wear resistance of the alloys at room temperature and at elevated temperatures are investigated utilizing a Microhardness Tester Unit, with a Hot Stage, and a Hot Pin-on-Disk Tribometer, respectively. The wear test results of these alloys are compared with those of commercial wear-resistant Stellite 3 and Stellite 12. The worn surfaces of the specimens are analyzed using SEM/EDX to explore the wear mechanisms of these alloys with temperature change. The variations of hardness and wear resistance of these alloys with temperature are studied and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. J.R. Davis: Nickel, Cobalt, and Their Alloys, ASM International, Materials Park, 2000, p. 362-370.
2. I. Campos, G. Ramirez, U. Figueroa, and C. Velazquez: Surf. Eng., 2007, vol. 23(3), pp. 216–222.10.1179/174329407X174416 ↗
3. R. Liu, X.S. Qi, S. Kapoor, and X.J. Wu: J. Mater. Sci., 2007, vol. 45(22), pp. 6225–6234.10.1007/s10853-010-4717-8 ↗
4. R. Liu, X.S. Qi, S. Kapoor, and X.J. Wu: Interna. J. Res. Rev. Appl. Sci., 2010, vol. 5(2), pp. 110-122.
5. A. Frenk and J.D. Wagnière: J. Phys. IV Fr., 1991, vol. 1(C7), pp. 65–68.
6. A. Frenk, and W. Kurz: Wear, 1994, vol. 174(1-2), pp. 81-91.10.1016/0043-1648(94)90089-2 ↗
7. L.C. Wang, and D.Y. Li: Wear, 2003, vol. 255(1-6), pp. 535-544.10.1016/S0043-1648(03)00057-7 ↗
8. I. Radu, D.Y. Li, and R. Llewellyn: Wear, 2004, vol. 257(11), pp. 1154-1166.10.1016/j.wear.2004.07.013 ↗
9. I. Radu, and D.Y. Li: Tribo. Inter., 2007, vol. 40(2), pp. 254-265.10.1016/j.triboint.2005.09.027 ↗
10. H. Celik, and M. Kaplan: Wear, 2004, vol. 257(5-6), pp. 606-611.10.1016/j.wear.2004.03.008 ↗
11. C.T. Sims: JOM, 1969, vol. 21, pp. 27-42.10.1007/BF03378800 ↗
12. R.B. Herchenroeder, S.J. Matthew, J.W. Tackett and S.T. Wlodek: Cobalt, 1972, vol. 54, pp. 3-13.
13. V.P. Deodeshmukh, S.K. Srivastava and J. Bai: Mater. Corr., 2013, vol. 64(9), pp. 772-776.10.1002/maco.201106342 ↗
14. P. Berthod and E. Conrath: Mater. Chem. Phys., 2014, vol. 143(3), pp. 1139-1148.10.1016/j.matchemphys.2013.11.014 ↗
15. E. Lassner and W.D. Schubert: Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds, Kluwer Academic/Plenum Publishers, New York, 1999, p. 1–59.10.1007/978-1-4615-4907-9 ↗
16. S.H.M. Anijdan, A. Bahrami, N. Varahram, and P. Davami: Mater. Sci. Eng. A, 2007, vol. 454-455, pp. 623-628.10.1016/j.msea.2006.11.128 ↗
17. H.M. Wang, D.Y. Luan, and L.X. Cai: Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2003, vol. 34A(9), pp. 2005-2015.10.1007/s11661-003-0165-2 ↗
18. Y.J. Hu, L. Xiong, and J.L. Meng: Chinese J. Nonferrous Metal., 2007, vol. 17(5), pp. 737-742.
19. H.B. Lu, and D.T. Yang: Powder Metall. Technol., 2003, vol. 21(4), pp. 213-217.
20. X.F. Liu, J.Y. Zhao, and Y.F. Sun: J. Zhengzhou University Eng. Sci., 2009, vol. 30(3), pp. 122–125.
21. H. Yu, R. Ahmed, H. de Lovelock, and S. Davies: J. Tribology, 2009, vol. 131(1), pp. 1–12.10.1115/1.2991122 ↗
22. J. Xu, H. John, and A. Krafczyk: Ceramic Eng. Sci. Proceed., 2010, vol. 30(3), pp. 55–66.10.1002/9780470584293.ch6 ↗
23. A.D. Verkhoturov, P.S. Gordienko, I.A. Podchernyaeva, L.A. Konevtsov, and E.S. Panin: Inorg. Mater., 2011, vol. 2(2), pp. 180–85.10.1134/S2075113311020213 ↗
24. C.B. Tang, D.X. Liu, F.Q. Li, B. Tang, and L. Qin: Mater. Sci. Forum, 2011, vol. 675–677(2), pp. 1253–1257.10.4028/www.scientific.net/MSF.675-677.1253 ↗
25. H. Yu, R. Ahmed, and H. de Lovelock: J. Tribology, 2007, vol. 129(3), pp. 586–594.10.1115/1.2736450 ↗
26. ASTM G99, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, ASTM International, Materials Park, 2010.
27. M.E. El Dahshan, J. Stringer, and D.P. Whittle: Cobalt, 1974, vol. 3, pp. 86-90.
28. J.D. Xing, A.F. Zhang, and W.H. Lu: J. Xi’ An Jiaotong Univ., 1993, vol. 27 (6), pp. 83–86.
29. M. Aristizabal, J.M. Sanchez, N. Rodriguez, F. Ibarreta, and R. Martinez: Corr. Sci., 2011, vol. 53(9), pp. 2754-2760.10.1016/j.corsci.2011.05.006 ↗
30. E.A. Gulbransen, K.F. Andrew, and J. Electrochem: Soc., 1960, vol. 107(7), pp. 619–628.10.1149/1.2427787 ↗