journal article·2020-04

The Role of Silicon Morphology in the Electrical Conductivity and Mechanical Properties of As-Cast B319 Aluminum Alloy

Eli Vandersluis, Payam Emadi, Bernoulli Andilab, Comondore Ravindran

Publisher page

Abstract

The enhanced performance of automotive B319 aluminum alloys can be realized via the improvement of both strength and conductivity. Yet, vastly dissimilar mechanisms are responsible for each property, and the incomplete understanding of their respective dominant microstructural features impedes effective alloy design. In this study, permanent mold cast B319 alloy was systematically produced with total solidification rates between 0.14 and 5.89 °C s−1 and strontium contents up to 300 ppm to isolate their respective effects on material properties. The as-cast samples were characterized by their dendritic structure, eutectic silicon morphology, porosity content, hardness, tensile strength, ductility, and electrical conductivity. With increasing solidification rate, the refinement of microstructure considerably improved all mechanical properties analyzed. Nonetheless, these properties were found to be independent of strontium content, attributed to the role of the coarse and brittle intermetallic phases in fracture initiation. In contrast, conductivity was minimally affected by solidification rate in the unmodified condition. However, the synergistic silicon modification promoted by increasing both solidification rate and strontium enhanced conductivity by up to 3 pct IACS. The correlations developed with the quantified silicon characteristics establish this phase as dominant in the conductivity of B319 alloy, and they elucidate opportunities for the further enhancement of automotive materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. W. Callister and G. Rethwisch: Materials Science and Engineering: An Introduction, 9th ed., Wiley, New York, 2013.
2. [2] R. Lumley, N. Deeva, R. Larsen, J. Gembarovic and J. Freeman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1074-1086.10.1007/s11661-012-1443-7 ↗
3. [3] F. Stadler, H. Antrekowitsch, W. Fragner, H. Kaufmann, E. Pinatel and P. Uggowitzer: Mater. Sci. Eng. A, 2013, vol. 560, pp. 481-491.10.1016/j.msea.2012.09.093 ↗
4. [4] M. Mulazimoglu, R. Drew and J. Gruzleski: Metall. Trans. A, 1989, vol. 20A, pp. 383-389.10.1007/BF02653917 ↗
5. [5] M. Mulazimoglu, R. Drew and J. Gruzleski: J. Mater. Sci. Lett., 1989, vol. 8, pp. 297-300.10.1007/BF00725503 ↗
6. [6] H. Wang and S. Lo: J. Mater. Sci. Lett., 1996, vol. 15, pp. 369-371.10.1007/BF00277168 ↗
7. [7] R. Lumley, I. Polmear, H. Groot and J. Ferrier: Scripta Mater., 2008, vol. 58, pp. 1006-1009.10.1016/j.scriptamat.2008.01.031 ↗
8. [8] E. Vandersluis and C. Ravindran: J. Mater. Sci., 2019, vol. 54, no. 5, pp. 4325-4339.10.1007/s10853-018-3109-3 ↗
9. [9] E. Vandersluis and C. Ravindran: J. Mater. Eng. Perform., 2018, vol. 27, no. 3, pp. 1109-1121.10.1007/s11665-018-3184-2 ↗
10. [10] E. Vandersluis, A. Lombardi, C. Ravindran, A. Bois-Brochu, F. Chiesa and R. MacKay: Mater. Sci. Eng. A, 2015, vol. 648, pp. 401-411.10.1016/j.msea.2015.09.091 ↗
11. [11] R. Sharma: Phase Transformations in Materials, CBS Publishers and Distributors, New Delhi, 2002.
12. [12] E. Vandersluis and C. Ravindran: JOM, 2019, vol. 71, pp. 2072-2077.10.1007/s11837-019-03376-0 ↗
13. [13] G. Sigworth: AFS Trans., 2008, vol. 19, pp. 115-139.
14. [14] E. Vandersluis, D. Sediako, C. Ravindran, A. Elsayed and G. Byczynski: J. Alloys Compd., 2018, vol. 736, pp. 172-180.10.1016/j.jallcom.2017.11.118 ↗
15. [15] M. Makhlouf and H. Guthy: J. Light Met., 2001, vol. 1, pp. 199-218.10.1016/S1471-5317(02)00003-2 ↗
16. S. Hegde, K. NarayanPrabhu: J. Mater. Sci., 2008, vol. 43, pp. 3009-3027.10.1007/s10853-008-2505-5 ↗
17. [17] F. Zu and X. Li: China Foundry, 2014, vol. 11, no. 4, pp. 287-295.
18. [18] S. D. McDonald, A. K. Dahle, J. A. Taylor and D. H. StJohn: Metall. Mater. Trans. A, 2004, vol. 35, no. 6, pp. 1829-1837.10.1007/s11661-004-0091-y ↗
19. [19] K. Nogita and A. Dahle: Mater. Trans., 2001, vol. 42, no. 3, pp. 393-396.10.2320/matertrans.42.393 ↗
20. [20] S. Joseph and S. Kumar: Mater. Sci. Eng. A, 2013, vol. 588, pp. 111-124.10.1016/j.msea.2013.09.019 ↗
21. [21] M. Hafiz and T. Kobayashi: Scr. Metall. Mater., 1994, vol. 30, pp. 475-480.10.1016/0956-716X(94)90606-8 ↗
22. M. Zamani: Al-Si Cast Alloys—Microstructure and Mechanical Properties at Ambient and Elevated Temperatures, JTH Dissertation Series, Jönköping, 2015.
23. [23] S. Shaha, F. Czerwinski, W. Kasprzak, J.Friedman and D. Chen: Mater. Sci. Eng. A, 2016, vol. 657, pp. 441-452.10.1016/j.msea.2016.01.015 ↗
24. [24] M. Riestra, E. Ghassemali, T. Bogdanoff and S. Seifeddine, Mater. Sci. Eng. A, 2017, vol. 703, pp. 270-279.10.1016/j.msea.2017.07.074 ↗
25. K. NarayanPrabhu and B. Ravishankar: Mater. Sci. Eng. A, 2003, vol. 360, pp. 293-298.10.1016/S0921-5093(03)00467-2 ↗
26. [26] M. Mulazimoglu, R. Drew and J. Gruzleski: Metall. Trans. A, 1987, vol. 18A, pp. 941-947.10.1007/BF02668542 ↗
27. [27] B. Closset, K. Pirie and J. Gruzleski: AFS Trans., 1984, vol. 92, pp. 123-133.
28. [28] H. Oger, B. Closset and J. Gruzleski: AFS Trans., 1983, vol. 91, pp. 17-20.
29. [29] M. Djurdjevic, H. Jiang and J. Sokolowski: Mater. Charact., 2001, vol. 46, pp. 31-38.10.1016/S1044-5803(00)00090-5 ↗
30. E. Vandersluis, N. Prabaharan, and C. Ravindran: Int. J. Metalcast., 2020, vol. 14 (1), pp. 37–46.10.1007/s40962-019-00329-w ↗
31. [31] E. Vandersluis and C. Ravindran: Trans. Indian Inst. Met., 2018, vol. 71, pp. 1231-1236.10.1007/s12666-017-1259-7 ↗
32. [32] S. Eguskiza, A. Nikla, A. I. Fernández-Calvo, F. Santos and M. Djurdjevic: Int. J. Metalcast, 2015, vol. 9, pp. 43-50.10.1007/BF03355622 ↗
33. E. Vandersluis, C. Ravindran: Metallogr. Microstruct. Anal., 2017, vol. 6, pp. 89-94.10.1007/s13632-016-0331-8 ↗
34. [34] J. Davis, Ed.: ASM Specialty Handbook: Aluminum and aluminum alloys, ASM International, Materials Park, 1993.
35. ASTM B557: Standard Test Methods for Tension Testing Wrought and Cast Aluminum, ASTM International, West Conshohocken, 2014.
36. ASTM E1004: Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method, ASTM International, West Conshohocken, 2017.
37. [37] M. Easton, C. Davidson and D. StJohn: Mater. Trans., 2011, vol. 52, no. 5, pp. 842-847.10.2320/matertrans.L-MZ201118 ↗
38. [38] N. Tiedje, J. Taylor and M. Easton: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4846-4858.10.1007/s11661-012-1308-0 ↗
39. A. Knuutinen, K. Nogita, S. McDonald. J. Light Met., 2001, vol. 1, pp. 241-249.10.1016/S1471-5317(02)00006-8 ↗
40. [40] X. Bian, Z. Zhang and X. Liu: Mater. Sci. Forum, 2000, vols. 331-337, pp. 361-366.10.4028/www.scientific.net/MSF.331-337.361 ↗
41. [41] E. Ghassemali, M. Riestra, T. Bogdanoff, B. Kumar and S. Seifeddine: Procedia Eng., 2017, vol. 207, pp. 19-24.10.1016/j.proeng.2017.10.731 ↗
42. [42] N. Fatahalla, M. Hafiz and M. Abdulkhalek: J. Mater. Sci., 1999, vol. 34, pp. 3555-3564.10.1023/A:1004626425326 ↗
43. [43] M. Zamani and S. Seifeddine: Int. J. Metalcast., 2016, vol. 10, pp. 457-465.10.1007/s40962-016-0032-8 ↗
44. [44] A. Samuel, H. Doty, S. Valtierra, and F. Samuel: Int. J. Metalcast., 2017, vol. 11, pp. 475-493.10.1007/s40962-016-0089-4 ↗
45. [45] T. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., Taylor & Francis Group, Boca Raton, 2005.10.1201/9781420058215 ↗
46. A. Mohamed, F. Samuel and S. Alkahtani: Mater. Sci. Eng. A, 2013, vol. 577, pp. 64-72.10.1016/j.msea.2013.03.084 ↗
47. [47] A. Lombardi, F. D’Elia, C. Ravindran, B. Murty and R. MacKay: Trans. Indian Inst. Met., 2011, vol. 64, pp. 7-11.10.1007/s12666-011-0002-z ↗
48. [48] S. Shabestari and S. Ghodrat: Mater. Sci. Eng. A, 2007, vol. 467, pp. 150-158.10.1016/j.msea.2007.05.022 ↗
49. [49] D. Argo, R. Drew and J. Gruzleski: AFS Trans., 1987, vol. 95, pp. 455-464.
50. L. Arnberg and L. Bäckerud: Solidification Characteristics of Aluminum Alloys Volume 3: Dendrite Coherency, American Foundrymen’s Society, Inc., Des Plaines, 1996.
51. [51] J. Li, M. Albu, F. Hofer and P. Schumacher: Acta Mater., 2015, vol. 83, pp. 187-202.10.1016/j.actamat.2014.09.040 ↗
52. [52] J. Barrirero, J. Li, M. Engstler, N. Ghafoor, P. Schumacher, M. Odén and F. Mücklich: Scr. Mater., 2016, vol. 117, pp. 16-19.10.1016/j.scriptamat.2016.02.018 ↗
53. [53] E. Vandersluis, D. Sediako, P. Emadi, C. Ravindran, A. Elsayed and G. Byczynski: J. Appl. Crystallogr., 2018, vol. 51, pp. 1141-1150.10.1107/S1600576718008737 ↗
54. [54] J. Gruzleski: Microstructure Development During Metalcasting, American Foundrymen’s Society, Inc., Des Plaines, 2000.
55. [55] V. Páramo, R. Colás, E. Velasco and S. Valtierra: J. Mater. Eng. Perform., 2000, vol. 9, pp. 616-622.10.1361/105994900770345467 ↗
56. [56] E. Ogris, A. Wahlen, H. Lüchinger and P. Uggowitzer: J. Light Met., 2002, vol. 2, pp. 263-269.10.1016/S1471-5317(03)00010-5 ↗
57. [57] R. Wang and W. Lu: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2799-2809.10.1007/s11661-012-1603-9 ↗
58. [58] X. Jian, C. Xu, T. Meek and Q. Han: AFS Trans., 2005, vol. 113, pp. 131-138.