journal article·2019-02-15Open access

Evolution of Microstructure and Crystallographic Texture During Dissimilar Friction Stir Welding of Duplex Stainless Steel to Low Carbon-Manganese Structural Steel

S. Rahimi, T. N. Konkova, I. Violatos, T. N. Baker

Abstract

Abstract Electron backscattered diffraction (EBSD) was used to analyze the evolution of microstructure and crystallographic texture during friction stir welding of dissimilar type 2205 duplex stainless steel (DSS) to type S275 low carbon-manganese structural steel. The results of microstructural analyses show that the temperature in the center of stirred zone reached temperatures between Ac1and Ac3during welding, resulting in a minor ferrite-to-austenite phase transformation in the S275 steel, and no changes in the fractions of ferrite and austenite in the DSS. Temperatures in the thermomechanically affected and shoulder-affected zones of both materials, in particular toward the root of the weld, did not exceed the Ac1of S275 steel. The shear generated by the friction between the material and the rotating probe occurred in austenitic/ferritic phase field of the S275 and DSS. In the former, the transformed austenite regions of the microstructure were transformed to acicular ferrite, on cooling, while the dual-phase austenitic/ferritic structure of the latter was retained. Studying the development of crystallographic textures with regard to shear flow lines generated by the probe tool showed the dominance of simple shear components across the whole weld in both materials. The ferrite texture in S275 steel was dominated byD1,D2,E,$$ \bar{E} $$, andF, where the fraction of acicular ferrite formed on cooling showed a negligible deviation from the texture for the ideal shear texture components of bcc metals. The ferrite texture in DSS was dominated byD1,D2,I,$$ \bar{I} $$, andF, and that of austenite was dominated by theA,$$ \bar{A} $$,B, and$$ \bar{B} $$of the ideal shear texture components for bcc and fcc metals, respectively. WhileD1,D2, andFcomponents of the ideal shear texture are common between the ferrite in S275 steel and that of dual-phase DSS, the preferential partitioning of strain into the ferrite phase of DSS led to the development ofIand$$ \bar{I} $$components in DSS, as opposed toEand$$ \bar{E} $$in the S275 steel. The formations of fine and ultrafine equiaxed grains were observed in different regions of both materials that are believed to be due to strain-induced continuous dynamic recrystallization (CDRX) in ferrite of both DSS and S275 steel, and discontinuous dynamic recrystallization (DDRX) in austenite phase of DSS.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. W. M. Thomas, E. D. Nicholas, J. C. Needham, M. G. Murch, P. Temple-Smith, C. J. Dawes, International Patent application no. PCT/GB92/02203 and GB Patent application No. 9125978·8 and US Patent application no. 5,460,317, 1991.
2. W. M. Thomas, C. J. Dawes, Weld 1996, vol. 75, pp. 41-45.
3. G. A. Moraitis, G. N. Labeas, Sci. Technol.Weld. Join. 2010, vol. 15, pp. 177–184.10.1179/136217109X12537145658779 ↗
4. M. Wade, A. P. Reynolds, Sci. Technol.Weld. Join. 2010, vol. 15, pp. 64-69.10.1179/136217109X12562846839150 ↗
5. R. Nandan, T. DebRoy, H. K. D. H. Bhadeshia, Prog. Mater Sci. 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
6. Y. H. Yin, N. Sun, T. H. North, S. S. Hu, Sci. Technol.Weld. Join. 2010, vol. 15, pp. 81–86.10.1179/136217109X12489665059384 ↗
7. G. Lu¨tjering, J. C. Williams: Titanium. (Springer, New York, 2007), pp. 109–113.
8. J. Young, D. P. Field, T. W. Nelson, Metall. Mater. Trans. A 2013, vol. 44, pp. 3167–75.10.1007/s11661-013-1684-0 ↗
9. M. Gosh, K. Kumar, R. S. Mishra, Scr. Mater. 2010, vol. 63, pp. 851-854.10.1016/j.scriptamat.2010.06.032 ↗
10. S. Mironov, Y. S. Sato, H. Kokawa, H. Inoue, S.Tsuge, Acta Mater. 2011, vol. 59, pp. 5472 - 5481.10.1016/j.actamat.2011.05.021 ↗
11. S. Rahimi, B. P. Wynne, T. N. Baker, Metall. Mater. Trans. A 2017, vol. 48, pp. 362-378.10.1007/s11661-016-3833-8 ↗
12. Y. S. Sato, T. W. Nelson, C. J. Sterling, Acta Mater. 2005, vol. 53, pp. 637 - 645.10.1016/j.actamat.2004.10.017 ↗
13. C. Y. Lee, D. H. Choi, Y. M. Yeon, S. B. Jung, Sci. Technol.Weld. Join. 2009, vol. 14, pp. 216–220.10.1179/136217109X400439 ↗
14. G. Benghalia, S. Rahimi, J. Wood, H. Coules, S. Paddea, Mater Perform. Charact. 2018, vol. 7, no. 4, pp. 606–629.10.1520/MPC20170091 ↗
15. W. Rae, Z. Lomas, M. Jackson, S. Rahimi (2017), Mater. Charact. 2017, vol. 132, pp. 10–19.10.1016/j.matchar.2017.07.042 ↗
16. D. Easton, J. Wood, S. Rahimi, A. Galloway, Y. Zhang, C. Hardie, IEEE T PLASMA SCI 2016, vol. 44, pp. 1625-1630.10.1109/TPS.2016.2565205 ↗
17. S. Rahimi, K. Mehrez, T. J. Marrow, Corros Eng Sci Techn 2015, vol. 51, pp. 383-391.10.1080/1478422X.2015.1122295 ↗
18. S. Rahimi, T. J. Marrow, Fatigue Fract. Eng. Mater. Struct. 2012, vol. 35, pp. 359-373.10.1111/j.1460-2695.2011.01627.x ↗
19. H. K. D. H. Bhadeshia, Sci. Technol. Weld. Join. 2010, vol. 15, pp. 646–647.10.1179/136217110X12886936510243 ↗
20. M. Jafarzadegan, A. H. Feng, A. Abdollah-Zadeh, T. Saeid,J. Shen, H. Assadi, Mater. Charact. 2012, vol. 74, pp. 28–41.10.1016/j.matchar.2012.09.004 ↗
21. P. Xue, D. R. Ni, D. Wang, B. I. Xiao, Z. Y. Ma, Mater. Sci. Eng. A 2011, vol. 528, pp. 4683–4689.10.1016/j.msea.2011.02.067 ↗
22. R. S. Coelho, A. Kostka, J. F. dos Santos, A. Kaysser-Pyzalla, Mater. Sci. Eng. A 2012, vol. 556, pp. 175–183.10.1016/j.msea.2012.06.076 ↗
23. X. Liu, S. Lan, J. Ni, Mater. Des. 2014, vol. 59, pp. 50–62.10.1016/j.matdes.2014.02.003 ↗
24. C. B. Jagadeesha, Mater. Sci. Eng. A 2014, vol. 616, pp. 55–62.10.1016/j.msea.2014.07.090 ↗
25. A. Aghaei, K. Dehghani, Int. J. Adv. Manuf. Technol. 2015, vol. 77, pp. 573–579.10.1007/s00170-014-6467-2 ↗
26. C. Shen, J. Zhang, J. Ge, J. Environ. Sci. 2011, vol. 23, pp. 32–35.10.1016/S1001-0742(11)61072-3 ↗
27. H. Kasai, Y. Morisada, H. Fujii, Mater. Sci. Eng.A 2015, vol. 624, pp. 250–255.10.1016/j.msea.2014.11.060 ↗
28. J. Guo, P. Gougeon, X. G. Chen, Mater. Sci. Eng. A 2012, vol. 553, pp. 149–156.10.1016/j.msea.2012.06.004 ↗
29. K. Ishida, Y. Gao, K. Nagatsuka, M. Takahashi, K. Nakata, J. Alloys Compd 2015, vol. 630, pp. 172–177.10.1016/j.jallcom.2015.01.004 ↗
30. L. Karlsson, E. L. Berqvist, H. Larsson, Weld. World 2002, vol. 46, pp. 10–14.10.1007/BF03266360 ↗
31. W. M. Thomas, P. L. Threadgill, E. D. Nicholas, Sci. Technol.Weld. Join. 1999, vol. 4, pp. 365–372.10.1179/136217199101538012 ↗
32. J. Rodriguez, A. J. Ramirez, Sci. Technol. Weld. Join. 2014, vol. 19, pp. 343–349.10.1179/1362171814Y.0000000198 ↗
33. H. Jamshidi Aval, S. Serajzadeh, A. H. Kokabi, A. Loureiro, Sci. Technol. Weld. Join. 2011, vol. 16, pp. 597–604.10.1179/1362171811Y.0000000044 ↗
34. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, C.C. Bampton, Scr. Mater. 1997, vol. 36, pp. 69–73.10.1016/S1359-6462(96)00344-2 ↗
35. D. J. Shindo, A. R. Rivera, L. E. Murr, J. Mater. Sci. 2002, vol. 37, pp. 4999–5005.10.1023/A:1021023329430 ↗
36. G. Liu, L.E. Murr, C.-S. Niou, J.C. McClure, F.R. Vega, Scr. Mater. 1997, vol. 37, pp. 355–359.10.1016/S1359-6462(97)00093-6 ↗
37. M. Amirizad, A.H. Kokabi, M.A. Gharacheh, R. Sarrafi, B. Shalshi, M. Azizieh, Mater. Lett. 2006, vol. 60, pp. 565–568.10.1016/j.matlet.2005.09.035 ↗
38. R. A. Prado, L. E. Murr, K.F. Soto, J. C. McClure, Mater. Sci. Eng A 2003, vol. 349, pp. 156–165.10.1016/S0921-5093(02)00750-5 ↗
39. Y. Li, L.E. Murr, J.C. McClure, Mater. Sci. Eng A 1999, vol. 271, pp. 213–223.10.1016/S0921-5093(99)00204-X ↗
40. R.S. Mishra, Z.Y. Ma, Mater. Sci. Eng. A 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
41. K. Kumar, S.V. Kailas, Mater. Sci. Eng. A 2008, vol. 485, pp. 367–374.10.1016/j.msea.2007.08.013 ↗
42. R. Rai, A. De, H.K.D.H. Bhadeshia, T. DebRoy, Sci. Technol. Weld. Join. 2011, vol. 16, pp. 325–342.10.1179/1362171811Y.0000000023 ↗
43. T. Weinberger, N. Enzinger, H. Cerjak, Sci. Technol.Weld. Join. 2009, vol. 14, pp. 210– 215.10.1179/136217109X406956 ↗
44. Y. C. Chen, H. Fujii, T. Tsumura, Y. Kitagawa, K. Nakata, K. Ikeuchi, K. Matsubayashi, Y. Michishita, Y. Fujiya, J. Katoh, Sci. Technol.Weld. Join. 2009, vol. 14, pp. 197–201.10.1179/136217108X386527 ↗
45. M. C. Theodoro, V. F. Pereira, P. R. Mei, A. J. Ramirez, Metall. Mater. Trans. B 2015, vol. 46, pp. 1440 – 1447.10.1007/s11663-015-0302-5 ↗
46. B. P. Logan, A. I. Toumpis, A. M. Galloway, N. A. McPherson, S. J. Hambling, Sci. Technol.Weld. Join. 2016, vol. 21, pp. 11-19.10.1179/1362171815Y.0000000063 ↗
47. Y. S. Sato, T. W. Nelson, C. J. Sterling, R. J. Steel, C. O. Pettersson, Mater. Sci. Eng. A 2005, vol. 397, pp. 376–384.
48. S. H. C. Park, Y. S. Sato, H. Kokawa, K. Okamoto, S. Hirano, M. Inagaki, Scr. Mater. 2003, vol. 49, pp. 1175– 80.10.1016/j.scriptamat.2003.08.022 ↗
49. A. Toumpis, A. Galloway, S. Cater, N. McPherson, Mater. Des. 2014, vol. 62, pp. 64–75.10.1016/j.matdes.2014.04.066 ↗
50. T. N. Baker, N. A. McPherson, Mater. Sci. Technol. 2016, vol. 33, pp. 234-243.10.1080/02670836.2016.1180752 ↗
51. H. H. Cho, H. N. Han, S. T. Hong, J. H. Park, Y. J. Kwon, S. H. Kim, R. J. Steel, Mater. Sci. Eng. A 2011, vol. 528, pp. 2889–2894.10.1016/j.msea.2010.12.061 ↗
52. H. H. Cho, S. H. Kang, S. H. Kim, K. H. Oh, H. J. Kim, W. S. Chang, H. N. Han, Mater. Des. 2012, vol. 34, pp. 258-267.10.1016/j.matdes.2011.08.010 ↗
53. D. P. Field, T. W. Nelson, Y. Hovanski, K. V. Jata, Metall. Mater. Trans. A 2001, vol. 32, pp. 2869–2877.10.1007/s11661-001-1037-2 ↗
54. Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan, T. Hashimoto, Metall. Mater. Trans. A 2001, vol. 32, pp. 941–948.10.1007/s11661-001-0351-z ↗
55. M. M. Z. Ahmed, B. P. Wynne, W. M. Rainforth, P. L. Threadgill, Scr. Mater. 2008, vol. 59, p. 507.10.1016/j.scriptamat.2008.04.047 ↗
56. P. S. Davies, B. P. Wynne, W. M. Rainforth, M. J. Thomas, P. L. Threadgill, Metall. Mater. Trans. A 2011, vol. 42, p. 2278–89.10.1007/s11661-011-0606-2 ↗
57. S. Mironov, Y. S. Sato, H. Kokawa, Acta Mater. 2008, vol. 56, pp. 2602–2614.10.1016/j.actamat.2008.01.040 ↗
58. B. D. Nelson, Using Design of Experiments and Electron Backscatter Diffraction to Model Extended Plasticity Mechanisms in Friction Stir Welded AISI 304L Stainless Steel, Brigham Young University, 2010.10.1002/9781118062302.ch15 ↗
59. M. E. Fitzpatrick, A. T. Fry, P. Holdway, F. A. Kandil, J. Shackleton and L. Suominen, NPL Measurement Good Practice Guide No. 52, 2005.
60. S. Rajakumar, C. Muralidharan, V. Balasubramanian, Mater. Des. 2011, vol. 32, pp. 535-549.10.1016/j.matdes.2010.08.025 ↗
61. Y. G. Kim, H. Fujii, T. Tsumura, T. T. Komazaki, K. Nakata, Mater. Sci. Eng. A 2006, vol. 415, pp. 250-254.10.1016/j.msea.2005.09.072 ↗
62. E. J. Gutie´ rrez-Castan˜eda n, A. Salinas-Rodrı´guez, J Magn Magn Mater 2011, vol. 323, pp. 2524–30.
63. D. H. Choi, C. Y. Lee, B. W. Ahn, Y. M. Yeon, S. H. C. Park, Y. S. Sato, H. Kokawa, S. B. Jung, Sci. Technol.Weld. Join. 2010, vol. 15, pp. 299–304.10.1179/136217109X12577814486737 ↗
64. L. Gavard, H. K. D. H. Bhadeshia, D. J. C. Mackay, S. Suzuki, Mater. Sci. Technol. 1996, vol. 12, pp. 453-463.10.1179/mst.1996.12.6.453 ↗
65. H. Sieurin, R. Sandström, Mater. Sci. Eng. A 2006, vol. 418, pp. 250-56.10.1016/j.msea.2005.11.025 ↗
66. N. A. McPherson, Y. Li, T. N. Baker, Sci. Technol.Weld. Join. 2010, vol. 5, pp. 235-244.10.1179/136217100101538263 ↗
67. R. Badji, M. Bouabdallah, B. Bacroix, C. Kaloun, B. Belkessa, H. Maza, Mater. Charact. 2008, vol. 59, pp. 447-453.10.1016/j.matchar.2007.03.004 ↗
68. V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, S. Sundaresan, Mater. Sci. Eng. A 2003, vol. 358, pp. 9-16.10.1016/S0921-5093(03)00077-7 ↗
69. J. R. Yang, H. K. D. H. Bhadeshia, Adv Weld Technol Sci 1987, vol. 1, pp. 187–91.
70. R. A. Farrar, P. L. Harrison, J Mater Sci 1987, vol. 22, pp. 3812–3820.10.1007/BF01133327 ↗
71. A. Iza-Mendia, A. Pinol-Juez, J. J. Urcola, I. Gutierrez, Metall. Mater. Trans. A 1998, vol. 29, pp. 2975–2986.10.1007/s11661-998-0205-z ↗
72. A. Pinol-Juez, A. Iza-Mendia, I. Gutierrez, Metall. Mater. Trans. A 2000, vol. 31, pp. 1671–1677.10.1007/s11661-000-0177-0 ↗
73. G. Martin, D. Caldemaison, M. Bornert, C. Pinna, Y. Brechet, M. Veron, J. D. Mithieux, T. Pardoen, Exp. Mech. 2013, vol. 53, pp. 205–215.10.1007/s11340-012-9628-y ↗
74. G. Martin, S. K. Yerra, Y. Brechet, M. Veron, J. D. Mithieux, B. Chehab, L. Delannay, T. Pardoen, Acta Mater. 2012, vol. 60, pp. 4646–4660.10.1016/j.actamat.2012.03.040 ↗
75. L. Duprez, B.C. De Cooman, N. Akdut, Metall. Mater. Trans. A 2002, vol. 33, pp. 1931–1938.10.1007/s11661-002-0026-4 ↗
76. L. E. Hernandez-Castillo, J. H. Beynon, C. Pinna, S. Van Der Zwaag, Steel Res. Int. 2005, vol. 76, pp. 137–141.10.1002/srin.200505985 ↗
77. F. J. Humphreys, M. Hatherly: Recrystallization and Related Annealing Phenomena. 2nd ed. (Elsevier Science, New York, 2004).
78. P. Cizek, B. P. Wynne, W. M. Rainforth, Mater. Sci. Eng. A 2002, vol. 324, pp. 214–218.10.1016/S0921-5093(01)01314-4 ↗
79. P. Cizek, F. Bai, W. M. Rainforth, J. H. Beynon, Mater. Trans. JIM 2004, vol. 45, pp. 1–8.10.2320/matertrans.45.2157 ↗
80. S. Gourdet, F. Montheillet, Acta Mater. 2003, vol. 51, pp. 2685-2699.10.1016/S1359-6454(03)00078-8 ↗
81. A. Dehghan-Manshadi, M. R. Barnett, P. D. Hodgson, Mater. Sci. Technol. 2007, vol. 23, pp. 1478-1484.10.1179/174328407X239019 ↗
82. A. Oudin, P. D. Hodgson, M. R. Barnett, Mater. Sci. Eng. A 2008, vol. 486, pp. 72-79.10.1016/j.msea.2007.09.045 ↗
83. C. Castan, F. Montheillet, A. Perlade, Scr. Mater. 2013, vol. 68, pp. 360-364.10.1016/j.scriptamat.2012.07.037 ↗
84. C. G. Schmidt, C. M. Young, B. Walser, R. H. Klundt, O. D. Sherby, Metall. Trans. A 1982, vol. 13, pp. 447-456.10.1007/BF02643353 ↗
85. C. Huang, E. B. Hawbolt, X. Chen, T. R. Meadowcroft, D. K. Matlock, Acta Mater. 2001, vol. 49, pp. 1445-1452.10.1016/S1359-6454(01)00032-5 ↗
86. F. Gao, Y. Xu, B. Song, K. Xia, Metall. Mater. Trans. A 2000, vol. 31, pp. 21-27.10.1007/s11661-000-0048-8 ↗
87. J. Baczynski, J. J. Jonas, Metall. Mater. Trans. A 1998, vol. 29, pp. 447-462.10.1007/s11661-998-0125-y ↗
88. L. Li, W. Yang, Z. Sun, Metall. Mater. Trans. A 2006, vol. 37, pp. 609-619.10.1007/s11661-006-0033-y ↗
89. L. Li, W. Yang, Z. Sun, Metall. Mater. Trans. A 2013, vol. 44, pp. 2060-2069.10.1007/s11661-012-1572-z ↗
90. O. Balancin, W. A. M. Hoffmann, J. J. Jonas, Metall. Mater. Trans. A 2000, vol. 31, pp. 1353-1364.10.1007/s11661-000-0254-4 ↗
91. P. Cizek, B.P. Wynne, Mater. Sci. Eng. A 1997, vol. 230, pp. 88-94.10.1016/S0921-5093(97)00087-7 ↗
92. P. Cizek, B. P. Wynne, W. M. Rainforth, J. Microsc. 2006, vol. 222, pp. 85–96.10.1111/j.1365-2818.2006.01576.x ↗
93. R. Z. Wang, T. C. Lei, Scr. Metall. Mater. 1994, vol. 31, pp. 1193-1196.10.1016/0956-716X(94)90575-4 ↗
94. T. Maki, T. Furuhara, T. Tsuzaki, ISIJ Int. 2001, vol. 41, pp. 571-579.10.2355/isijinternational.41.571 ↗
95. P. Cizek, B. P. Wynne, W. M. Rainforth, Acta Mater. 2016, vol. 106, pp. 129-143.10.1016/j.actamat.2016.01.012 ↗
96. N. Haghdadi, P. Cizek, H. Beladi, P.D. Hodgson, Acta Mater. 2017, vol. 126, pp. 44 – 57.10.1016/j.actamat.2016.12.045 ↗
97. H. J. McQueen, Mater. Sci. Eng. A 2004, vol. 387– 389 pp. 203–208.10.1016/j.msea.2004.01.064 ↗
98. T. Sakai, J. J. Jonas, Acta Metall 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
99. E. Brunger, X. Wang, G. Gottstein, Scr. Mater. 1998, vol. 38, pp. 1843–1849.10.1016/S1359-6462(98)00124-9 ↗
100. H. Beladi, P. Cizek, P. D. Hodgson, Metall. Mater. Trans. A 2009, vol. 40, pp. 1175–1189.10.1007/s11661-009-9799-z ↗