journal article·2018-09

Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy

Jean-Charles Stinville, Etienne Martin, Mallikarjun Karadge, Shak Ismonov, Monica Soare, Tim Hanlon, Sairam Sundaram, McLean P. Echlin, Patrick G. Callahan, William C. Lenthe, Jiashi Miao, Andrew E. Wessman, Rebecca Finlay, Adrian Loghin, Judson Marte, Tresa M. Pollock

Publisher page

Abstract

Cyclic fatigue experiments in the high and very high cycle fatigue regimes have been performed on a Rene 88DT polycrystalline nickel-based superalloy. The microstructural configurations that favor early strain localization and fatigue crack initiation at high temperature from 400 °C to 650 °C have been investigated. Competing failure modes are observed in the high to the very high cycle fatigue regime. Fatigue cracks initiate from non-metallic inclusions and from intrinsic internal microstructural features. Interestingly, as stresses are reduced into the very high cycle regime, there is a transition to initiation only at crystallographic facets. At higher stress in the high cycle fatigue regime, a significant fraction of specimens initiate cracks at non-metallic inclusions. This transition is analyzed with regard to microstructural features that favor strain localization and accumulate damage early during cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. J. Miao, T. M. Pollock, J. Wayne Jones, Acta Mater. 57 (20) (2009) 5964–5974.10.1016/j.actamat.2009.08.022 ↗
2. E. Huron and P. Roth: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., The Minerals, Metals & Materials Society, Warrendale, 1996, pp. 359–68.10.7449/1996/Superalloys_1996_359_368 ↗
3. J. C. Stinville, W. C. Lenthe, J. Miao, T. M. Pollock, Acta Materialia 103 (2015) 461–473.10.1016/j.actamat.2015.09.050 ↗
4. M. Caton, S. Jha, A. Rosenberger, and A. Larsen: in Superalloy 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., The Minerals, Metals & Materials Society, Warrendale, 2004, pp. 305–12.10.7449/2004/Superalloys_2004_305_312 ↗
5. J. C. Stinville, E. Martin, M. Karadge, S. Ismonov, M. Soare, T. Hanlon, S. Sundaram, M. P. Echlin, P. G. Callahan, W. C. Lenthe, V. Miller, J. Miao, A. E. Wessman, R. Finlay, A. Loghin, J. Marte, T. M. Pollock, Acta Materialia 152 (2018) 16 – 33.10.1016/j.actamat.2018.03.035 ↗
6. J. C. Stinville, V. M. Miller, T. M. Pollock, Superalloys 2016 (2016) 897–905.
7. D.D. Krueger, R.D. Kissinger, and R.G. Menzies: Superalloys 1992, S.D. Antolokch, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstro, eds., The Minerals, Metals & Materials Society, Warrendale, 1992, p. 277.10.7449/1992/Superalloys_1992_277_286 ↗
8. S. Wlodek, M. Kelly, and D. Alden: Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., The Minerals, Metals & Materials Society, Warrendale, 1996, pp. 129–36.10.7449/1996/Superalloys_1996_129_136 ↗
9. J. C. Stinville, W. C. Lenthe, M. P. Echlin, P. G. Callahan, D. Texier, T. M. Pollock, International Journal of Fracture 208 (1) (2017) 221–240.10.1007/s10704-017-0241-z ↗
10. G.T. Cashman, Int. J. Fatigue 32 (3) (2010) 492–496,10.1016/j.ijfatigue.2009.04.018 ↗
11. A. Shyam, C. Torbet, S. Jha, J. Larsen, M. Caton, C. Szczepanski, T. Pollock, and J. Jones: Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., The Minerals, Metals & Materials Society, Warrendale, 2004, pp. 259–68.10.7449/2004/Superalloys_2004_259_268 ↗
12. P. G. Callahan, J.-C. Stinville, E. R. Yao, M. P. Echlin, M. S. Titus, M. D. Graef, D. S. Gianola, T. M. Pollock, Ultramicroscopy 186 (2018) 49 – 61.10.1016/j.ultramic.2017.11.004 ↗
13. J. C. Stinville, M. P. Echlin, P. G. Callahan, V. M. Miller, D. Texier, F. Bridier, P. Bocher, T. M. Pollock, Experimental Mechanics 57 (2017) 1289 – 1309.10.1007/s11340-017-0286-y ↗
14. A. Heinz, P. Neumann, Acta Metallurgica et Materialia 38 (10) (1990) 1933 – 1940.10.1016/0956-7151(90)90305-Z ↗
15. S. Wong, P. Dawson, Acta Materialia 58 (5) (2010) 1658 – 1678.10.1016/j.actamat.2009.11.009 ↗
16. J. C. Stinville, M. P. Echlin, D. Texier, F. Bridier, P. Bocher, T. M. Pollock, Experimental Mechanics (2015) 56:1–20.
17. D. Khireddine, M. Khireddine, International Journal of Fatigue 22 (7) (2000) 585 – 591.10.1016/S0142-1123(00)00028-1 ↗
18. Y. Brechet, F. Louchet, Acta Metallurgica 37 (9) (1989) 2469 – 2473.10.1016/0001-6160(89)90044-8 ↗
19. H. Ho, M. Risbet, X. Feaugas, Acta Materialia 85 (2015) 155 – 167.10.1016/j.actamat.2014.11.020 ↗
20. H. Mughrabi, International Journal of Fatigue 28 (2006) 501–508.10.1016/j.ijfatigue.2005.05.018 ↗
21. J. Miao, T. M. Pollock, J. Wayne Jones, Acta Materialia 60 (6–7) (2012) 2840 – 2854.10.1016/j.actamat.2012.01.049 ↗
22. M. P. Echlin, W. C. Lenthe, T. M. Pollock, Integrating Materials and Manufacturing Innovation 3 (1) (2014) 21.10.1186/s40192-014-0021-9 ↗
23. M. Joyce and P. Reed: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., Minerals, Metals & Materials Society, Warrendale, 2004, pp. 295–304.10.7449/2004/Superalloys_2004_295_303 ↗
24. B. Kear, H. Wilsdorf, Transactions of the Metallurgical Society of AIME 224 (1962) 382.