journal article·2018-09

High-Temperature Oxidation Behavior of a Novel Co-Base Superalloy

Stéphane A. J. Forsik, Alberto O. Polar Rosas, Tao Wang, Gian A. Colombo, Ning Zhou, Samuel J. Kernion, Mario E. Epler

Publisher page

Abstract

A new polycrystalline γ′-strengthened cobalt-base superalloy with improved oxidation resistance up to 1100 °C is presented. Based on the Co-Al-W-Ni-Cr-Ti system, the chemistry was optimized via computational thermodynamics, and an 18 kg ingot was successfully melted under vacuum and processed. During cyclic oxidation trials at 800 °C, 1000 °C, and 1100 °C, the Co-base superalloy gained significantly less mass per surface area than the benchmark Waspaloy tested in similar conditions. X-ray diffraction and EDS analysis of the oxidized surface showed that a continuous layer of Al2O3 forms between the substrate and the external oxides, providing the necessary oxidation resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90–91.10.1126/science.1121738 ↗
2. A. Suzuki and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
3. A. Suzuki, H. Inui, and T.M. Pollock: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 345–68.10.1146/annurev-matsci-070214-021043 ↗
4. F.S. Pettit and G.H. Meier: Superalloys 1984, 1984, pp. 651–87.
5. X. Peng and F. Wang. In: Aerospace Materials Handbook, CRC Press, Boca Raton, 2012, pp. 237–80.
6. P. Berthod: Oxid. Met., 2005, vol. 64, pp. 235–52.10.1007/s11085-005-6562-8 ↗
7. J.L. Smialek and G.H. Meier: Superalloys II, 2nd ed., John Wiley & Sons, New York, NY, 1997, pp. 293–26.
8. D.J. Young: High Temperature Oxidation and Corrosion of Metals, Elsevier, Amsterdam, 2008.
9. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Corros. Sci., 2014, vol. 83, pp. 382–95.10.1016/j.corsci.2014.03.002 ↗
10. L. Klein, A. Zendegani, M. Palumbo, S.G. Fries, and S. Virtanen: Corros. Sci., 2014, vol. 89, pp. 1–5.10.1016/j.corsci.2014.08.016 ↗
11. L. Klein, A. Bauer, S. Neumeier, M. Göken, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2027–34.10.1016/j.corsci.2011.02.033 ↗
12. L. Klein, Y. Shen, M.S. Killian, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2713–20.10.1016/j.corsci.2011.04.020 ↗
13. A.-C. Yeh, S.-C. Wang, C.-F. Cheng, Y.-J. Chang, and S.-C. Chang: Oxid. Met., 2016, vol. 86, pp. 99–112.10.1007/s11085-016-9623-2 ↗
14. T.M. Pollock, J. Dibbern, M. Tsunekane, J. Zhu, and A. Suzuki: JOM, 2010, vol. 62, pp. 58–63.10.1007/s11837-010-0013-y ↗
15. S. Neumeier, L.P. Freund, and M. Göken: Scr. Mater., 2015, vol. 109, pp. 104–07.10.1016/j.scriptamat.2015.07.030 ↗
16. H. Yu, S. Ukai, S. Hayashi, and N. Oono: Corros. Sci., 2017, vol. 118, pp. 49–59.10.1016/j.corsci.2017.01.015 ↗
17. N. Vermaak, A. Mottura, and T.M. Pollock: Corros. Sci., 2013, vol. 75, pp. 300–08.10.1016/j.corsci.2013.06.013 ↗
18. C.A. Stewart, R.K. Rhein, A. Suzuki, T.M. Pollock, and C.G. Levi: In: Superalloys 2016, Wiley, Hoboken, 2016, pp. 991–9910.1002/9781119075646.ch105 ↗
19. A. Kracke: Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, Wiley InterScience, Warrendale, PA, 2010, pp. 13–50.10.7449/2010/Superalloys_2010_13_50 ↗
20. J.H. Chen, P.M. Rogers, and J.A. Little: Oxid. Met., 1997, vol. 47, pp. 381–410.10.1007/BF02134783 ↗
21. J. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
22. Thermo-Calc Software TCNi6 Ni-based Superalloys Database version 6. http://www.thermocalc.com/media/8165/2013-05-31-tcni6_extended_info.pdf.
23. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Mater. Trans., 2008, vol. 49, pp. 1474–79.10.2320/matertrans.MER2008073 ↗
24. I. Povstugar, P.P. Choi, S. Neumeier, A. Bauer, C.H. Zenk, M. Göken, and D. Raabe: Acta Mater., 2014, vol. 78, pp. 78–85.10.1016/j.actamat.2014.06.020 ↗
25. C. Wagner: Corros. Sci., 1965, vol. 5, pp. 751–64.10.1016/S0010-938X(65)80003-8 ↗
26. C.S. Giggins and F.S. Pettit: J. Electrochem. Soc., 1971, vol. 118, p. 1782.10.1149/1.2407837 ↗
27. R. Mévrel: Mater. Sci. Eng. A, 1989, vol. 120–121, pp. 13–24.10.1016/0921-5093(89)90713-2 ↗
28. M. Hillert: J. Alloys Compd., 2001, vol. 320, pp. 161–76.10.1016/S0925-8388(00)01481-X ↗
29. CarTech® Waspaloy Alloy. http://www.cartech.com/en/product-solutions/cartech-waspaloy-alloy/. Accessed 11 October 2017.
30. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Intermetallics, 2014, vol. 48, pp. 44–53.10.1016/j.intermet.2013.10.022 ↗
31. F.R. Chien and R. Brown: J. Mater. Sci., 1992, vol. 27, pp. 1514–20.10.1007/BF00542912 ↗
32. A. Encinas-Oropesa, G.L. Drew, M.C. Hardy, A.J. Leggett, J.R. Nicholls, and N.J. Simms: Superalloys 2008, 2008, pp. 609–18.
33. M.H. Li, X.F. Sun, J.G. Li, Z.Y. Zhang, T. Jin, H.R. Guan, and Z.Q. Hu: Oxid. Met., 2003, vol. 59, pp. 591–605.10.1023/A:1023604214245 ↗
34. M. Knop, V. A. Vorontsov, M.C. Hardy, and D. Dye: MATEC Web Conf., 2014, vol. 14, p. 18003.10.1051/matecconf/20141418003 ↗
35. T.J. Nijdam, L.P.H. Jeurgens, and W.G. Sloof: Acta Mater., 2005, vol. 53, pp. 1643–53.10.1016/j.actamat.2004.12.014 ↗
36. L.M. Pike and S.K. Srivastava: Mater. Sci. Forum, 2008, vol. 595–598, pp. 661–71.10.4028/www.scientific.net/MSF.595-598.661 ↗
37. C.A. Barrett: NASA Technical Memorandum 87297, National Aeronautics and Space Administration, Washington, DC, 1986.
38. A.S. Khanna: Introduction to High Temperature Oxidation and Corrosion, ASM International, Materials Park, OH, 2002.