Thin-Wall Debit in Creep of DS200 + Hf Alloy
Source abstract
Abstract
The thin-wall debit in creep life of the directionally solidified DS200 + Hf alloy at 900 °C has been investigated. A range of different applied loads and various directions with respect to the solidification direction was investigated. A direct comparison of creep properties in air between thin and massive specimens of DS200 + Hf was studied in detail. Creep results have shown that a substantial thin-wall debit in creep life and creep ductility is obtained along transverse directions compared with the longitudinal direction. The above creep performance was compared with the thin-wall loss in creep of the 〈001〉 single-crystal DS200 + Hf, for which almost no thickness debit in creep life was observed. The thin-wall debit in creep was mainly ascribed to the preferential oxidation of the grain boundaries. Besides, oxidized carbides were found to be cracked, and recrystallization was found in their vicinity. Finally, based on the produced experimental outcome, a coupled creep-oxidation modeling approach has been proposed to account for the thin-wall debit in creep life. This model takes into account creep anisotropy through the normalization by the ultimate tensile stress in both the Norton and Kachanov laws used in this modeling framework.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. M.J. Donachie, and S.J. Donachie: Superalloys: A Technical Guide, ASM International, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
2. M. Gell, D.N. Duhl, and A.F. Giamei: Superalloys 1980, Seven Springs, Champion, PA, 1980, TMS, pp. 205–14.10.7449/1980/Superalloys_1980_205_214 ↗
3. R.C. Reed: The Superalloys - Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
4. J.J. Jackson, M.J. Donachie, R.J. Henricks, and M. Gell: Metallurgical Transactions, 1977, vol. 8A, pp. 1615-1620.10.1007/BF02644867 ↗
5. F.L. Versnyder, and M.E. Shank: Materials Science and Engineering, 1970, vol. 6, pp. 213-247.10.1016/0025-5416(70)90050-9 ↗
6. D.N. Duhl, and C.P. Sullivan: Journal of Metals, 1971, vol. 23, pp. 38-40.
7. M. Bensch, E. Fleischmann, C.H. Konrad, M. Fried, C.M.F. Rae, and U. Glatzel: Superalloys 2012, Seven Springs, Champion, PA, 2012, TMS, pp. 387-94.10.1002/9781118516430.ch42 ↗
8. M. Bensch, C.H. Konrad, E. Fleischmann, C.M.F. Rae, and U. Glatzel: Materials Science and Engineering: A, 2013, vol. 577, pp. 179-188.10.1016/j.msea.2013.04.032 ↗
9. M. Bensch, J. Preußner, R. Hüttner, G. Obigodi, S. Virtanen, J. Gabel, and U. Glatzel: Acta Materialia, 2010, vol. 58, pp. 1607-1617.10.1016/j.actamat.2009.11.004 ↗
10. M. Brunner, M. Bensch, R. Völkl, E. Affeldt, and U. Glatzel: Materials Science and Engineering: A, 2012, vol. 550, pp. 254-262.10.1016/j.msea.2012.04.067 ↗
11. S. Dryepondt, D. Monceau, F. Crabos, and E. Andrieu: Acta Materialia, 2005, vol. 53, pp. 4199-4209.10.1016/j.actamat.2005.05.018 ↗
12. V. Seetharaman, and A.D. Cetel: Superalloys 2004, Seven Springs, Champion, PA, 2004, TMS, pp. 207–14.10.7449/2004/Superalloys_2004_207_214 ↗
13. A. Srivastava, S. Gopagoni, A. Needleman, V. Seetharaman, A. Staroselsky, and R. Banerjee: Acta Materialia, 2012, vol. 60, pp. 5697-5711.10.1016/j.actamat.2012.06.043 ↗
14. A. Srivastava, and A. Needleman: Acta Materialia, 2013, vol. 61, pp. 6506-6516.10.1016/j.actamat.2013.07.028 ↗
15. Y. Hu, L. Zhang, C. Cheng, P. Zhao, T. Cao, G. Guo, and J. Zhao: Vacuum, 2018, vol. 150, pp. 105-115.10.1016/j.vacuum.2018.01.032 ↗
16. M. Bensch, A. Sato, N. Warnken, E. Affeldt, R.C. Reed, and U. Glatzel: Acta Materialia, 2012, vol. 60, pp. 5468-5480.10.1016/j.actamat.2012.06.036 ↗
17. D. Shi, C. Dong, and X. Yang: Materials & Design, 2013, vol. 45, pp. 663-673.10.1016/j.matdes.2012.09.031 ↗
18. J.C. Stinville, K. Gallup, and T.M. Pollock: Metallurgical and Materials Transactions A, 2015, vol. 46A, pp. 2516-2529.10.1007/s11661-015-2869-5 ↗
19. J. Huang, D. Shi, and X. Yang: Science China Technological Sciences, 2014, vol. 57, pp. 1802-1815.10.1007/s11431-014-5610-5 ↗
20. P. Caron, P. J. Henderson, T. Khan, and M. Mclean: Scripta Metallurgica, 1986, vol. 20, pp. 875-880.10.1016/0036-9748(86)90458-8 ↗
21. P. Caron, and T. Khan: Materials Science and Engineering, 1983, vol. 61, pp. 173-194.10.1016/0025-5416(83)90199-4 ↗
22. P. Caron, Y. Ohta, Y.G. Nakagawa, and T. Khan: Superalloys 1988, Seven Springs, Champion, PA, 1988, TMS, pp. 215–24.10.7449/1988/Superalloys_1988_215_224 ↗
23. L. Mataveli Suave, J. Cormier, P. Villechaise, D. Bertheau, G. Benoit, G. Cailletaud, and L. Marcin: Materials at High Temperatures, 2016, vol. 33 (4-5), pp. 361-371.10.1080/09603409.2016.1159836 ↗
24. J. Cormier, X. Milhet, F. Vogel, and J. Mendez: Superalloys 2008, Seven Springs, Champion, PA, 2008, TMS, pp. 941–49.10.7449/2008/Superalloys_2008_941_949 ↗
25. J. Cormier, X. Milhet, and J. Mendez: Acta Materialia, 2007, vol. 55, pp. 6250-6259.10.1016/j.actamat.2007.07.048 ↗
26. F. Riallant, J. Cormier, A. Longuet, X. Milhet, and J. Mendez: Metallurgical and Materials Transactions A, 2014, vol. 45A, pp. 351-360.10.1007/s11661-013-1961-y ↗
27. L. Mataveli Suave, J. Cormier, P. Villechaise, D. Bertheau, G. Benoit, F. Mauget, G. Cailletaud, and L. Marcin: Superalloys 2016, Seven Springs, Champion, PA, 2016, TMS, pp. 747–56.
28. P. Kontis, D.M. Collins, S. Johansson, A.J. Wilkinson, J.J. Moverare, and R.C. Reed: Superalloys 2016, Seven Springs, Champion, PA, 2016, TMS, pp. 763-772.10.1002/9781119075646.ch82 ↗
29. P. Kontis, D.M. Collins, A.J. Wilkinson, R.C. Reed, D. Raabe, and B. Gault: Scripta Materialia, 2018, vol. 147, pp. 59-63.10.1016/j.scriptamat.2017.12.028 ↗
30. P. Kontis, Z. Li, D.M. Collins, J. Cormier, D. Raabe, and B. Gault: Scripta Materialia, 2018, vol. 148, pp. 76-80.10.1016/j.scriptamat.2017.10.005 ↗
31. Z. Shi, J. Li, and S. Liu: Progress in Natural Science: Materials International, 2012, vol. 22, pp. 426-432.10.1016/j.pnsc.2012.10.004 ↗
32. S Steuer, Z Hervier, S Thabart, C Castaing, Tm Pollock, and J Cormier: Materials Science and Engineering: A, 2014, vol. 601, pp. 145-152.10.1016/j.msea.2014.02.046 ↗
33. E. Aghion, M. Bamberger, and A. Berkovits: Journal of Materials Science, 1991, vol. 26, pp. 1873-1881.10.1007/BF00543618 ↗
34. L. Mataveli Suave: PhD Thesis, ISAE-ENSMA, 2017.
35. L.M. Kachanov: Foundations of the Theory of Plasticity, 1971.
36. F.H. Norton: The Creep of Steel at High Temperatures, McGraw-Hill Book Company, Incorporated, 1929.
37. Y.N. Rabotnov: in Creep Rupture, Springer, 1969, pp. 342–49.10.1007/978-3-642-85640-2_26 ↗
38. B. Wilshire, and P.J. Scharning: International Materials Reviews, 2008, vol. 53, pp. 91-104.10.1179/174328008X254349 ↗
39. B. Wilshire, P.J. Scharning, and R. Hurst: Energy Materials, 2007, vol. 2, pp. 84-88.10.1179/174892407X266653 ↗
40. A. Baldan: Journal of Materials Science, 1995, vol. 30, pp. 6288-6298.10.1007/BF00369679 ↗
41. N. Matan, D.C. Cox, C.M.F. Rae, and R.C. Reed: Acta Materialia, 1999, vol. 47, pp. 2031-2045.10.1016/S1359-6454(99)00093-2 ↗
42. R. Desmorat, A. Mattiello, and J. Cormier: International Journal of Plasticity, 2017, vol. 95, pp. 43-81.10.1016/j.ijplas.2017.03.010 ↗
43. J.-B. le Graverend, J. Cormier, F. Gallerneau, P. Villechaise, S. Kruch, and J. Mendez: International Journal of Plasticity, 2014, vol. 59, pp. 55-83.10.1016/j.ijplas.2014.03.004 ↗