The Effect of Microstructural Variation on the Hydrogen Environment-Assisted Cracking of Monel K-500
Source abstract
Abstract
The influence of microstructural variation on hydrogen environment-assisted cracking (HEAC) of Monel K-500 was evaluated using five nominally peak-aged lots of material tested under slow-rising stress intensity loading while immersed in NaCl solution under cathodic polarizations. Minimal variation in HEAC resistance among material lots was observed for an applied potential of −950 mVSCE (E app, vs saturated calomel), whereas lot-to-lot variability in the fracture morphology demonstrates a significant difference in the HEAC resistance at the less negative potential of −850 mVSCE, suggesting that relatively severe H environments produce sufficient crack-tip H to minimize the impact of metallurgical differences. Sensitivity analyses accomplished by varying the inputs used in decohesion-based, micromechanical models imply significant variations in HEAC resistance are possible for realistic changes in grain boundary toughness, hydrogen uptake behavior, and yield strength. Grain size, impurity segregation (including the effects of gettering elements), grain boundary character/connectivity, and crack path tortuosity are also considered in the context of HEAC susceptibility. Yield strength, global hydrogen content, as well as impurity segregation to grain boundaries, especially boron and sulfur, are speculatively considered to be the dominant contributions in determining HEAC resistance. Modifications that would incorporate the effects of grain boundary segregation are proposed for the K TH model; detailed validation of such changes require high-fidelity and quantitative inputs for the degree of grain boundary segregation. Regardless, fracture mechanics-based HEAC results, detailed microstructural characterization, and micromechanical modeling were successfully coupled to gain insights into the influences governing the microstructure-dependent HEAC susceptibility of Monel K-500.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. NACE Standard MR0175-1998: Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment, NACE, Houston, TX, 1998
2. ASTM Standard G30, 1997: Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens, ASTM International, West Conshohocken, PA, 2009.
3. ASTM Standard G39, 1999: Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens, ASTM International, West Conshohocken, PA, 2011.
4. ASTM Standard G129, 2000: Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking, ASTM International, West Conshohocken, PA, 2013.
5. ASTM Standard E1681, 2003: Standard Test Method for Determining Threshold Stress Intensity for Environment-Assisted Cracking of Metallic Materials, ASTM International, West Conshohocken, PA, 2013.
6. ASTM Standard F1624: Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique, ASTM International, West Conshohocken, PA, 2012.
7. R. E. Butler: in Engineering with Copper-Nickel Alloys, Metals Society, London, 1988, pp. 79–84.
8. C. A. Clark, S. Driscoll, and P. Guha: Br. Corros. J., 1992, vol. 27, pp. 157-60.10.1179/bcj.1992.27.2.157 ↗
9. G. A. Scott: in 17th Offshore Technology Conference, Paper No. OTC 5050, Houston, 1985.
10. R. N. Tuttle and A. W. Thompson: Control of Hydrogen Embrittlement in Deep Gas Wells,Metallurgical Society AIME, United States, 1976.
11. L. H. Wolfe and M. W. Joosten: SPE Prod. Eng., 1988, vol. 3, pp. 382-86.10.2118/16632-PA ↗
12. J.R. Scully and M.G. Vassilaros: The Hydrogen Embrittlement Susceptibility of Monel Alloy K-500, presented at the Electrochemical Society Fall 1983 Meeting, Washington, DC, 1983.
13. R.D. Bayles, T. Lemieux, F. Martin, D. Lysogorski, T. Newbauer, W. Hyland, B.A. Green, E. Hogan, and P. Stencel: Naval Surface Treament Center MR2010 Proceedings Presentation, 2010.
14. L. H. Wolfe, C. C. Burnette, and M. W. Joosten: Mater. Perform., 1993, vol. 32, pp. 14-21.
15. J.A. Lillard: Ph.D Dissertation, University of Virginia, Charlottesville, VA, 1998.
16. W.K. Boyd and W.E. Berry: in Stress Corrosion Cracking of Metals—A State Art, ASTM STP 518, American Society for Testing and Materials, 1972, pp. 58–78.10.1520/STP34695S ↗
17. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milne, R. O. Ritchie, and B. Karihaloo, eds., Elsevier, New York, NY, 2003, pp. 31–101.10.1016/B0-08-043749-4/06134-6 ↗
18. R. P. Gangloff, H. M. Ha, J. T. Burns, and J. R. Scully: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3814-34.10.1007/s11661-014-2324-z ↗
19. R.P. Gangloff: in Environment Induced Cracking of Metals, S.A. Shipilov, R.H. Jones, J.-M. Olive, and R.B. Rebak, eds., Elsevier, Oxford, 2006, pp. 6337–49.
20. R. P. Gangloff: Corrosion, 2016, in press.
21. J.A. Harter: http://www.afgrow.net/downloads/pdownload.aspx, 2007.
22. W. A. Grell and P. J. Laz: Int. J. Fatigue, 2010, vol. 32, pp. 1042-9.10.1016/j.ijfatigue.2009.12.001 ↗
23. J. Harter: Int. J. Fatigue, 1999, vol. 21, pp. S181-5.10.1016/S0142-1123(99)00070-5 ↗
24. R.P. Gangloff, D.C. Slavik, R.S. Piascik, and R.H. Van Stone: in Small-Crack Test Methods, ASTM STP 1149, M. Larsen and J.E. Allison, eds., ASTM International, West Conshohocken, PA, 1992, pp. 116–68.10.1520/STP15067S ↗
25. J. Ai, H. M. Ha, R. P. Gangloff, and J. R. Scully: Acta Mater., 2013, vol. 61, 3186-99.10.1016/j.actamat.2013.02.007 ↗
26. T. Boniszewski and G. Smith: Acta Metall., 1963, vol. 11, pp.165-78.10.1016/0001-6160(63)90209-8 ↗
27. A. H. Windle and G. C. Smith: Met. Sci. J., 1970, vol. 4, 136-44.10.1179/msc.1970.4.1.136 ↗
28. D.H. Lassila and H.K. Birnbaum: Acta Metall., 1986, vol. 34, pp. 1237–43.10.1016/0001-6160(86)90010-6 ↗
29. D. M. Symons: Eng. Fract. Mech., 2001, vol. 68, pp. 751–71.10.1016/S0013-7944(00)00123-5 ↗
30. S. Bechtle, M. Kumar, B. P. Somerday, M. E. Launey, and R. O. Ritchie: Acta Mater., 2009, vol. 57, pp. 4148–57.10.1016/j.actamat.2009.05.012 ↗
31. M. L. Martin, B. P. Somerday, R. O. Ritchie, P. Sofronis, and I. M. Robertson: Acta Mater., 2012, vol. 60, pp. 2739–45.10.1016/j.actamat.2012.01.040 ↗
32. W.W. Gerberich: in Gaseous Hydrogen Embrittlement of Materials in Energy Technology, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing, 2012, pp. 209–46.10.1533/9780857095374.2.209 ↗
33. S. P. Lynch: Metall. Mater. Trans. A, 2013, vol. 44A, p. 1209-29.10.1007/s11661-012-1359-2 ↗
34. S. P. Lynch: Corros. Rev., 2012, vol. 30, pp. 105–23.10.1515/corrrev-2012-0502 ↗
35. Y. Katz, N. Tymiak, and W. W. Gerberich: Eng. Fract. Mech., 2001, vol. 68, pp. 619–46.10.1016/S0013-7944(00)00119-3 ↗
36. Y. Lee and R. P. Gangloff: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2174–90.10.1007/s11661-006-9051-z ↗
37. R.P. Gangloff: in Hydrogen Effects on Materials., B.P. Somerday, P. Sofronis, and R.H. Jones, eds., ASM International, Materials Park, OH, 2009, pp. 1–21.
38. W. W. Gerberich, R. A. Oriani, M. Lii, X. Chen, and T. Foecke: Philos. Mag. A, 1991, vol. 63, pp. 363–76.10.1080/01418619108204854 ↗
39. U. Komaragiri, S. R. Agnew, R. P. Gangloff, and M. R. Begley: J. Mech. Phys. Solids, 2008, vol. 56, pp. 3527–40.10.1016/j.jmps.2008.08.007 ↗
40. R.P. Gangloff: in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, N.R. Moody and A.W. Thompson, eds., The Minerals, Metals & Materials Society, Warrendale, PA, 2002.
41. Nickel-Copper-Aluminum Alloy, Wrought (UNS N05500), QQ-N-286G: Department of the Navy, 2000.
42. J.R. Davis, ed: in Nickel, Cobalt, and Their Alloys: ASM Special Handbook, 2000, pp. 167–88.
43. G. K. Dey and P. Mukhopadhyay: Mater. Sci. Eng., 1986, vol. 84, pp. 177–89.10.1016/0025-5416(86)90236-3 ↗
44. G. K. Dey, R. Tewari, P. Rao, S. L. Wadekar, and P. Mukhopadhyay: Metall. Trans. A, 1993, vol. 24, pp. 2709–19.10.1007/BF02659495 ↗
45. H. Tada, P.C. Paris, and G.R. Irwin: The Stress Analysis of Cracks Handbook, Paris Productions Incorporated, St. Louis, MO, 1985.
46. H. H. Johnson: Mater. Res. Stand., 1965, vol. 5, pp. 442–45.
47. K.-H. Schwalbe and D. Hellmann: J. Test. Eval., 1981, vol. 9, pp. 218–21.10.1520/JTE11560J ↗
48. ASTM Standard E647: Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, West Conshohocken, PA, 2013.
49. V. Kumar, M. D. German, and C. F. Shih: An Engineering Approach for Elastic-Plastic Fracture Analysis, Electric Power Research Institute, Palo Alto, CA, 1981.10.2172/6068291 ↗
50. H. M. Ha, J. Ai, and J. R. Scully: Corrosion, 2014, vol. 70, pp. 166–84.10.5006/0990 ↗
51. B. A. Kehler and J. R. Scully: Corrosion, 2008, vol. 64, pp. 465–77.10.5006/1.3278484 ↗
52. B.C. Rincon Troconis, Z.D. Harris, J.T. Burns, and J.R. Scully: Corrosion, in preparation 2016.
53. T. L. Anderson: Fracture Mechanics: Fundamentals and Applications, 3rd ed., Taylor & Francis, London, 2005.10.1201/9781420058215 ↗
54. J.T. Burns, Z.D. Harris, J.D. Dolph, and R.P. Gangloff: Measurement and Modeling of Hydrogen Environment Assisted Cracking in a Ni-Cu-Ti-Al Superalloy,Metall. Mater. Trans. A, in review.
55. H. J. Frost and M. F. Ashby: Deformation-Mechanism Maps : The Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, Oxford Oxfordshire ; New York, 1982.
56. J. Waldman, R.P. Gangloff, and J.T. Burns: Final Report, STTR Topic No. N08-T010 (Phase II Option I), Navmar Applied Sciences Corportation, Warminster, PA, 2014.
57. K. A. Nibur, B. P. Somerday, C. San Marchi, J. W. Foulk, M. Dadfarnia, and P. Sofronis: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 248-69.10.1007/s11661-012-1400-5 ↗
58. E. Richey and R.P. Gangloff: in Environmentally Assisted Cracking: Predictive Methods for Risk Assessment and Evaluation of Materials, ASTM STP 1401, R. D. Kane, ed., ASTM, West Conshohocken, PA, 2000, pp. 104–27.10.1520/STP10216S ↗
59. M. L. Martin, I. M. Robertson, and P. Sofronis: Acta Mater., 2011, vol. 59, pp. 3680–87.10.1016/j.actamat.2011.03.002 ↗
60. ASTM Standard E112: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2013.
61. E.E. Underwood: Quantitative Stereology, Addison-Wesley Pub. Co., Reading, Mass., 1970.
62. J.R. Scully: in Environmentally Assisted Cracking: Predictive Methods for Risk Assessment and Evaluation of Materials, ASTM STP 1401, R. D. Kane, ed., ASTM, West Conshohocken, PA, 2000, pp. 40–69.10.1520/STP10198S ↗
63. T. Watanabe: J. Mater. Sci., 2011, vol. 46, pp. 4095–4115.10.1007/s10853-011-5393-z ↗
64. P. Lejcek: in Grain Boundary Segregation in Metals, P. Lejcek, ed., Springer, Berlin, 2010.10.1007/978-3-642-12505-8 ↗
65. A. J. Wilkinson, G. Meaden, and D. J. Dingley: Ultramicroscopy, 2006, vol. 106, pp. 307–13.10.1016/j.ultramic.2005.10.001 ↗
66. C. D. Taylor, M. Neurock, and J. R. Scully: J. Electrochem. Soc., 2011, vol. 158, pp. F36–44.10.1149/1.3536470 ↗
67. C. L. Briant, H. C. Feng, and C. J. McMahon: Metall. Trans. A, 1978, vol. 9, pp. 625–33.10.1007/BF02659919 ↗
68. G. M. Pressouyre: Acta Met., 1980, vol. 28, pp. 895–911.10.1016/0001-6160(80)90106-6 ↗
69. A. Turnbull, R. G. Ballinger, I. S. Hwang, and M. M. Morra: Metall. Mater. Trans. A, 1992, vol. 23A.10.1007/BF02663432 ↗
70. J. P. Hirth: Metall. Mater. Trans. A, 1980, vol. 11, pp. 861–90.10.1007/BF02654700 ↗
71. D. Li, R. P. Gangloff, and J. R. Scully: Metall. Mater. Trans. A, 2004, vol. 35, pp. 849–64.10.1007/s11661-004-0011-1 ↗
72. J. E. Angelo, N. R. Moody, and M. I. Baskes: Model. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 289–307.10.1088/0965-0393/3/3/001 ↗
73. H. Huang and W. W. Gerberich: Acta Metall. Mater., 1994, vol. 42, pp. 639–47.10.1016/0956-7151(94)90260-7 ↗
74. M. R. Louthan, G. R. Caskey, J. A. Donovan, and D. E. Rawl: Mater. Sci. Eng., 1972, vol. 10, pp. 357–68.10.1016/0025-5416(72)90109-7 ↗
75. S. Kobayashi, T. Maruyama, S. Tsurekawa, and T. Watanabe: Acta Mater., 2012, vol. 60, pp. 6200–12.10.1016/j.actamat.2012.07.065 ↗
76. R. M. Latanision and H. Opperhauser: Metall. Trans., 1974, vol. 5, pp. 483–9210.1007/BF02644118 ↗
77. A. Oudriss, J. Creus, J. Bouhattate, C. Savall, B. Peraudeau, and X. Feaugas: Scr. Mater., 2012, vol. 66, pp. 37–40.10.1016/j.scriptamat.2011.09.036 ↗
78. J. R. Scully: MRS Bull., 1999, vol. 24, pp. 36–42.10.1557/S088376940005288X ↗
79. R.T. Holt and W. Wallace: Int. Met. Rev., 1976, pp. 1–24.10.1080/00345334.1976.11756362 ↗
80. B. Geddes: in Superalloys: Alloying and Performance, B. Geddes, H. Leon, and H. Huang, eds., ASTM International, West Conshohocken, PA, 2010, pp. 59–109.10.31399/asm.tb.sap.9781627083133 ↗
81. D. A. Woodford: Energy Mater., 2006, vol. 1, pp. 59–79.10.1179/174892306X99679 ↗
82. W. F. Smith: Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill, New York, 1993.
83. J. N. DuPont, J. C. Lippold, and S. D. Kiser: Welding Metallurgy and Weldability of Nickel-Base Alloys, John Wiley & Sons, Hoboken, N.J., 2009.10.1002/9780470500262 ↗
84. W. B. Kent: J. Vac. Sci. Technol., 1974, vol. 11, pp. 1038–46.10.1116/1.1318677 ↗
85. E.S. Huron, K.R. Bain, D.P. Mourer, J.J. Schirra, P.L. Reynolds, and E.E. Montero: in Superalloys 2004, K A Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Shirra, and S. Walston, eds., TMS, 2004.
86. J.M. Walshe, K.P. Gumz, and N.P. Anderson: in Quanitative Surface Analysis of Materials, ASTM STP 643, N.S. McIntyre, ed., ASTM, 1978, pp. 72–82.10.1520/STP25601S ↗
87. W. Swiatnicki, S. Lartigue, M. Biscondi, and D. Bouchet: J. Phys. Colloq., 1990, vol. 51, pp. 341–46.
88. D. Raabe, M. Herbig, S. Sandlobes, Y. Li, D. Tytko, M. Kuzmina, D. Ponge, and P. P. Choi: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 253–61.10.1016/j.cossms.2014.06.002 ↗
89. R. P. Messmer and C. L. Briant: Acta Metall., 1982, vol. 30, pp. 457–67.10.1016/0001-6160(82)90226-7 ↗
90. A. Kimura and H. K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 757–66.10.1016/0001-6160(88)90109-5 ↗
91. M.E. Natishan and M. Wagenhofer: in Fatigue and Fracture Mechanics: Twenty-Ninth Volume, ASTM STP 1332, T. L. Panontin and S. D. Sheppard, eds., ASTM, West Conshohocken, PA, 1999, pp. 384–92.10.1520/STP14959S ↗
92. M.E. Natishan and W.C. Porr: in Structural Integrity of Fasteners, ASTM STP 1236, P. M. Toor, ed., ASTM, Philadelphia, PA, 1995, pp. 81–92.10.1520/STP13048S ↗
93. T. S. F. Lee and R. M. Latanision: Metall. Trans. A, 1987, vol. 18, pp. 1653–62.10.1007/BF02646149 ↗
94. W. C. Johnson, J. E. Doherty, B. H. Kear, and A. F. Giamei: Scr. Metall., 1974, vol. 8, pp. 971–74.10.1016/0036-9748(74)90394-9 ↗
95. T. Miyahara, K. Stolt, D. A. Reed, and H. K. Birnbaum: Scr. Metall., 1985, vol. 19, pp. 117–21.10.1016/0036-9748(85)90276-5 ↗
96. R.H. Jones: in Advances in the Mechanics and Physics of Surfaces, R.M. Latanision and T.E. Fischer, eds., Hardwood Academic Publishers, Chur, Switzerland, 1986, pp. 1–70.
97. X. Xie, X.F. Liu, J. Dong, Y. Hu, and Z. Xu: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, 1997, pp. 531–42.10.7449/1997/Superalloys_1997_531_542 ↗
98. C. L. Briant and R. P. Messmer: J. Phys., 1982, vol. 43, pp. 255–69.10.1051/jphys:01982004302025500 ↗
99. G. S. Painter and F. W. Averill: Phys. Rev. Lett., 1987, vol. 58, pp. 234–37.10.1103/PhysRevLett.58.234 ↗
100. D. H. Lassila and H. K. Birnbaum: Acta Metall., 1987, vol. 35, pp. 1815–22.10.1016/0001-6160(87)90127-1 ↗