On the Formation of Sludge Intermetallic Particles in Secondary Aluminum Alloys
Source abstract
Abstract
The primary precipitation of Fe-rich intermetallics in AlSi9Cu3(Fe) type alloys is studied for different Fe, Mn, and Cr contents and cooling rates. Differential scanning calorimetry, thermal analysis, and interrupted solidification with a rapid quenching technique were used in combination in order to assess the nucleation temperature of sludge particles, as well as to follow their evolution. The results revealed that the sludge nucleation temperature and the release of latent heat during sludge formation are functions of Fe, Mn, and Cr levels in the molten alloy (i.e., the sludge factor, SF) and cooling rate. Moreover, it can be concluded that sensitivity to sludge formation is not affected by cooling rate; i.e., a decrease in the SF will reduce sludge nucleation temperature to the same extent for a higher cooling rate as for a lower cooling rate. The sludge formation temperature detected will assist foundries in setting the optimal molten metal temperature for preventing sludge formation in holding furnaces and plunger systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. S.G. Shabestari, Mater. Sci. Eng. A, 2004, vol. 383, pp. 289-298.10.1016/j.msea.2004.06.022 ↗
2. P.N. Crepeau, AFS Trans., 1995, vol. 103, pp. 361-366.
3. A.M.A. Mohamed, A.M. Samuel, F.H. Samuel and H.W. Doty, Mater. Design, 2009, vol. 30, pp. 3943-3957.10.1016/j.matdes.2009.05.042 ↗
4. A.M.A. Mohamed, F.H. Samuel, A.M. Samuel and H.W. Doty, Mater. Des., 2009, vol. 30, pp. 4218-4229.10.1016/j.matdes.2009.04.041 ↗
5. S. Seifeddine and I.L. Svensson, Metall. Sci. Technol., 2009, vol. 27, pp. 11-20.
6. C.M. Dinnis, J.A. Taylor and A.K. Dahle, Mater. Sci. Eng. A, 2006, vol. 425, pp. 286-296.10.1016/j.msea.2006.03.045 ↗
7. L. Lu and A.K. Dahle, Metall. Mater. Trans. A, 2005, vol. 36, pp. 819-835.
8. J.A. Taylor, G.B. Schaffer and D.H. StJohn, Metall. Mater. Trans. A, 1999, vol. 30, pp. 1643-1650.10.1007/s11661-999-0101-1 ↗
9. S. Shankar and D. Apelian, Metall. Mater. Trans. B, 2002, vol. 33, pp. 465-476.10.1007/s11663-002-0057-7 ↗
10. M.M. Makhlouf and D. Apelian: Work Performed Under DOE Contract No. DEFC07-99ID13716, 2002, pp. 1–46.
11. S. Seifeddine, S. Johansson and I.L. Svensson, Mater. Sci. Eng. A, 2008, vol. 490, pp. 385-390.10.1016/j.msea.2008.01.056 ↗
12. G. Gustafsson, T. Thorvaldsson and G.L. Dunlop, Metall. Trans. A, 1986, vol. 17, pp. 45-52.10.1007/BF02644441 ↗
13. P. Ashtari, H. Tezuka and T. Sato, Scripta Mater., 2005, vol. 53, pp. 937-942.10.1016/j.scriptamat.2005.06.022 ↗
14. J.Y. Hwang, H.W. Doty and M.J. Kaufman, Mater. Sci. Eng. A, 2008, vol. 488, pp. 496-504.10.1016/j.msea.2007.12.026 ↗
15. Z. Ma, A.M. Samuel, F.H. Samuel, H.W. Doty and S. Valtierra, Mater. Sci. Eng. A, 2008, vol. 490, pp. 36-51.10.1016/j.msea.2008.01.028 ↗
16. M. Mahta, M. Emamy, A. Daman, A. Keyvani and J. Campbell, Int. J. Cast. Met. Res., 2005, vol. 18, pp. 73-79.10.1179/136404605225022928 ↗
17. S. Murali, K.S. Raman and K.S.S. Murthy, Mater. Charact., 1994, vol. 33, pp. 99-112.10.1016/1044-5803(94)90072-8 ↗
18. S.G. Shabestari, M. Keshavarz and M.M. Hejazi, J. Alloys Compd., 2009, vol. 477, pp. 892-899.10.1016/j.jallcom.2008.11.037 ↗
19. Y.-H. Tan, S.-L. Lee and Y.-L. Lin, Metall. Mater. Trans. A, 1995, vol. 26, pp. 1195-1205.10.1007/BF02670615 ↗
20. L.A. Narayanan, F.H. Samuel and J.E. Gruzleski, Metall. Mater. Trans. A, 1994, vol. 25, pp. 1761-1773.10.1007/BF02668540 ↗
21. L.F. Mondolfo: Aluminium alloys: structure and properties. Butterworths, London, 1976.
22. G. Timelli and F. Bonollo, Mater. Sci. Eng. A, 2010, vol. 528, pp. 273-282.10.1016/j.msea.2010.08.079 ↗
23. X. Cao, N. Saunders and J. Campbell, J. Mater. Sci., 2004, vol. 39, pp. 2303-2314.10.1023/B:JMSC.0000019991.70334.5f ↗
24. S.G. Shabestari and J.E. Gruzleski, Metall. Mater. Trans. A, 1995, vol. 26A, pp. 999-1006.10.1007/BF02649097 ↗
25. J. Gobrecht, Giesserei, 1975, vol. 62, pp. 263-266.
26. J.L. Jorstad, Die Casting Engineer, 1986, vol. 11–12, pp. 30-36.
27. C.L. Chen, A. Richter and R.C. Thomson, Intermetallics, 2010, vol. 18, pp. 499-508.10.1016/j.intermet.2009.09.013 ↗
28. J. Shouxun, Y. Wenchao, G. Feng, W. Douglas and F. Zhongyun, Mater. Sci. Eng. A, 2012, vol. 564, pp. 130-139.
29. E. Taghaddos, M.M. Hejazi, R. Taghiabadi and S.G. Shabestari, J. Alloys Compd., 2009, vol. 468, pp. 539-545.10.1016/j.jallcom.2008.01.079 ↗
30. Y. Zedan, F.H. Samuel, A.M. Samuel and H.W. Doty, J. Mater. Process. Technol., 2010, vol. 210, pp. 245-257.10.1016/j.jmatprotec.2009.09.007 ↗
31. R. Dunn: Die Cast. Eng., 1965, vol. 9, pp. 8–30.
32. S. Seifeddine: Ph.D. Thesis, Dissertation No. 1058, Linköping Studies in Science and Technology, Sweden, Linköping, 2006.
33. L. Backerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys: Foundry Alloys, vol 2, AFS-Skanaluminium, Stockholm, 1990.
34. A. Fabrizi, S. Ferraro and G. Timelli, Mater. Charact., 2013, vol. 85, pp. 13-25.10.1016/j.matchar.2013.08.012 ↗
35. X. Cao and J. Campbell, Mater. Sci. Eng. A, 2004, vol. 35A, pp. 1425-1435.
36. R.I. Mackay and J.E. Gruzleski, Int. J. Cast. Met. Res., 1997, vol. 10, pp. 131-145.10.1080/13640461.1997.11819228 ↗
37. J.E. Gruzleski and B.M. Closset: The treatment of liquid aluminum-silicon alloys. (American Foundrymen’s Society, Inc., USA, 1990).
38. M. Warmuzek, W. Ratuszek and G. Sęk-Sas, Mater. Charact., 2005, vol. 54, pp. 31-40.10.1016/j.matchar.2004.10.001 ↗
39. Z. Guo, N. Saunders, J.P. Schillé and A.P. Miodownik, Mater. Sci. Eng. A, 2009, vol. 499, pp. 7-13.10.1016/j.msea.2007.09.097 ↗
40. X. Cao and J. Campbell, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1409-1420.10.1007/s11661-003-0253-3 ↗
41. A.M. Samuel, F.H. Samuel, H.W. Doty and S. Valtierra, AFS Trans., 2001, vol. 109, pp. 679-696.
42. X. Cao and J. Campbell, Int. J. Cast. Met. Res., 2003, vol. 15, pp. 595-608.10.1080/13640461.2003.11819546 ↗
43. W. Khalifa, F.H. Samuel, J.E. Gruzleski, H.W. Doty and S. Valtierra, Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1017-1032.10.1007/s11661-005-0295-9 ↗
44. S. Terzi, J.A. Taylor, Y.H. Cho, L. Salvo, M. Suéry, E. Boller and A.K. Dahle, Acta Mater., 2010, vol. 58, pp. 5370-5380.10.1016/j.actamat.2010.06.012 ↗