journal article·2010-05

The Effect of Secondary Gamma-Prime on the Primary Creep Behavior of Single-Crystal Nickel-Base Superalloys

B.C. Wilson, G.E. Fuchs

Publisher page

Abstract

Some second-, third-, and fourth-generation single-crystal Ni-base superalloys (i.e., Re-containing alloys) have demonstrated the propensity for excessive primary creep at intermediate temperatures. This behavior has been attributed to the presence of secondary gamma-prime precipitates in the gamma channels as well as on the Re content of the alloys. This investigation examined creep behavior for a common first-generation alloy, PWA 1480, a common second-generation alloy, PWA 1484, as well as a modified first-generation alloy, PWA 1480, with 3 wt pct rhenium added. In addition, two different aging heat treatments were given to each alloy to either precipitate or prevent the formation of fine (nanometer-scale) secondary gamma-prime in the gamma channels. The intermediate creep properties and tensile properties of the alloys were determined for both conditions. The microstructures of these samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), and then the role of the fine-scale microstructure and the alloy composition on the primary creep deformation was determined.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. C.M.F. Rae, N. Matan, and R.C. Reed: Mater. Sci. Eng., A, 2001, vol. 300 (1–2), pp. 125–34.10.1016/S0921-5093(00)01788-3 ↗
2. C.M.F. Rae and R.C. Reed: Acta Mater., 2006, vol. 55, pp. 1067–81.10.1016/j.actamat.2006.09.026 ↗
3. T. Sugui, Z. Jinghua, Z. Huihua, Y. Hongcai, X. Yongbo, and H. Zhuangq: Mater. Sci. Eng., 1998, vol. A262, pp. 271–78.
4. D.M. Shah, S. Vega, S. Woodward, and A.D. Cetel: Superalloys 2004, TMS, Warrendale, PA, 2004, pp. 197–206.
5. D.M. Shah and A. Cetel: Superalloys 1996, TMS, Warrendale, PA, 1996, pp. 273–82.
6. Q.Z. Chen and D.M. Knowles: Mater. Sci. Eng., A, 2003. vol. 356 (1–2), pp. 352–67.10.1016/S0921-5093(03)00148-5 ↗
7. K. Kakehi: Mater. Sci. Eng., A, 1999, vol. 278 (1–2), pp. 135–41.
8. L. Dongliang, Y. Deliang, and S. Chuanqi: Superalloys 1984, TMS, Warrendale, PA, 1984, pp. 199–210.
9. T. Link and M. Feller-Kniepmeier: Metall. Trans. A, 1992, vol. 23A, pp. 99–105.10.1007/BF02660857 ↗
10. D.M. Knowles and Q.Z. Chen: Mater. Sci. Eng., A, 2003, vol. 340 (1–2), pp. 88–102.10.1016/S0921-5093(02)00172-7 ↗
11. H. Harada: Materials Design Approaches and Experiences, TMS, Warrendale, PA, 2001, pp. 29–39.
12. J.X. Zhang, J.C. Whang, H. Harada, and Y. Koizumi: Acta Mater., 2005, vol. 53, pp. 4623–33.10.1016/j.actamat.2005.06.013 ↗
13. T. Link, A. Epishin, U. Bruckner, and P. Portella: Acta Mater., 2000, vol. 48, pp. 1981–94.10.1016/S1359-6454(99)00456-5 ↗
14. U. Bruckner, A. Epishin, T. Link, and K. Dressel: Mater. Sci. Eng., 1998, vol. A247, pp. 23–31.10.1016/S0921-5093(97)00856-3 ↗
15. D. Blavette, P. Caron, and T. Khan: Superalloys 1988, TMS, Warrendale, PA, 1988, pp. 305–14.
16. A.F. Giamei and D.L. Anton: Metall. Trans. A, 1985, vol. 16A, pp. 1997–2005.10.1007/BF02662400 ↗
17. R. Darolia, D.F. Lahrman, and R.D. Field: Superalloys 1988, TMS, Warrendale, PA, 1988, pp. 255–64.
18. A.D. Cetel and D.N. Duhl: Superalloys 1988, TMS, Warrendale, PA, 1988, pp. 235–44.
19. M. McLean, R.N. Ghosh, R.V. Curtis, U. Basu-Conlin, and M.R. Winstone: Superalloys 1992, TMS, Warrendale, PA, 1992, pp. 609–18.
20. T. Sugui, Z. Huihua, Z. Jinghua, Y. Hongcai, X. Yongbo, and H. Zhuangqi: Mater. Sci. Eng., 1999, vol. A279, pp. 160–65.