An Improved Theoretical Model for A-TIG Welding Based on Surface Phase Transition and Reversed Marangoni Flow
Source abstract
Abstract
It is experimentally shown that a thin layer of silica flux leads to an increased depth of weld penetration during activated TIG (=A-TIG) welding of Armco iron. The oxygen-content is found higher in the solidified weld metal and it is linked to the increased depth of penetration through the reversed Marangoni convection. It is theoretically shown for the first time that the basic reason of the reversed Marangoni convection is the phenomenon called “surface phase transition” (SPT), leading to the formation of a nano-thin FeO layer on the surface of liquid iron. It is shown that the ratio of dissolved oxygen in liquid iron to the O-content of the silica flux is determined by the wettability of silica particles by liquid iron. It is theoretically shown that when the silica flux surface density is higher than 15 µg/mm2, reversed Marangoni flow will take place along more than 50 pct of the melted surface. Comparing the SPT line with the dissociation curves of a number of oxides, they can be positioned in the following order of their ability to serve as a flux for A-TIG welding of steel: anatase-TiO2 (best)-rutile-TiO2 (very good)-silica-SiO2 (good)-alumina-Al2O3 (does not work). Anatase (and partly rutile) are self-regulating fluxes, as they provide at any temperature just as much dissolved oxygen as needed for the reversed Marangoni convection, and not more. On the other hand, oxygen can be over-dosed if silica, and other, less stable oxides (such as iron oxides) are used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. X. Yuan, M.B. Kim, and C.Y. Kang: Metal Mater Trans A, 2011, vol.42A, pp.1310–1324.10.1007/s11661-010-0534-6 ↗
2. B. Palanisamy and A. Upadhyaya: Metal Mater Trans A, 2011, vol.42A, pp.3417-3424.10.1007/s11661-011-0754-4 ↗
3. G. Zhang, W. Su, J. Zhang, and Z. Wei: Metal Mater Trans A, 2011, vol.42A, pp 2850 – 2861.10.1007/s11661-011-0677-0 ↗
4. X.X. Zhang, B.L. Xiao, and Z.Y. Ma: Metal Mater Trans A, 2011, vol.42A, pp.3218-3228.10.1007/s11661-011-0729-5 ↗
5. X.X. Zhang, B.L. Xiao, and Z.Y. Ma: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3229–39.10.1007/s11661-011-0730-z ↗
6. M. Mehta, A. Arora, A. De, and T. DebRoy: Metal Mater Trans A, 2011, vol.42A, pp.2716-2722.10.1007/s11661-011-0672-5 ↗
7. C. Genevois, M. Girard, B. Huneau, X. Sauvage, and G. Racineux: Metal Mater Trans A, 2011, vol.42A, pp.2290-2295.10.1007/s11661-011-0660-9 ↗
8. M. Karadge, B. Grant, P.J. Withers, G. Baxter, and M. Preuss: Metal Mater Trans A, 2011, vol.42A, pp.2301-2311.10.1007/s11661-011-0613-3 ↗
9. K.E. Knipling and R.W. Fonda: Metal Mater Trans A, 2011, vol.42A, pp.2312-2322.10.1007/s11661-011-0630-2 ↗
10. Z. Zhang, B.L. Xiao, D. Wang, and Z.Y. Ma: Metal Mater Trans A, 2011, vol.42A, pp.1717-1726.10.1007/s11661-010-0545-3 ↗
11. D. Bakavos, Y. Chen, L. Babout, P. Prangnell: Metal Mater Trans A, 2011, vol.42A, pp.1266-1282.10.1007/s11661-010-0514-x ↗
12. E. Cerri, P. Leo, X. Wang, and J.D. Embury: Metal Mater Trans A, 2011, vol.42A, pp.1283-1295.10.1007/s11661-010-0524-8 ↗
13. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara and S. Yue: Metal Mater Trans A, 2011, vol.42A, pp.729-744.10.1007/s11661-010-0457-2 ↗
14. A.L. Pilchak, W. Tang, H. Sahiner, A.P. Reynolds and J.C. Williams: Metal Mater Trans A, 2011, vol.42A, pp.745-762.10.1007/s11661-010-0439-4 ↗
15. K. Chen, W. Gan, K. Okamoto, K. Chung and R.H. Wagoner: Metal Mater Trans A, 2011, vol.42A, pp.488-507.10.1007/s11661-010-0426-9 ↗
16. B. Tam, M.I. Khan and Y. Zhou: Metal Mater Trans A, 2011, vol.42A, pp.2166-2175.10.1007/s11661-011-0639-6 ↗
17. C.W. Chan, H.C. Man and T.M. Yue: Metal Mater Trans A, 2011, vol.42A, pp.2264-2270.10.1007/s11661-011-0623-1 ↗
18. A. Kouadri and L. Barrallier: Metal Mater Trans A, 2011, vol.42A, pp.1815-1826.10.1007/s11661-010-0568-9 ↗
19. S.M. Chowdhury, D.L. Chen, S.D. Bhole, E. Powidajko, D.C. Weckman, and Y. Zhou: Metal Mater Trans A, 2011, vol.42A, pp.1974-1989.10.1007/s11661-010-0574-y ↗
20. L. Liu and H. Wang: Metal Mater Trans A, 2011, vol.42A, pp.1044-1050.10.1007/s11661-010-0521-y ↗
21. M.J. Perricone, J.N. DuPont, T.D. Anderson, C.V. Robino and J.R. Michael. Mater Trans A, 2011, vol.42A, pp.700-716.10.1007/s11661-010-0433-x ↗
22. B.W. Neuberger, P.G. Oberson and S. Ankem: Metal Mater Trans A, 2011, vol.42A, pp.1296-1309.10.1007/s11661-010-0532-8 ↗
23. M. Jeon, J.-H. Lee, T.K. Woo and S. Kim: Metal Mater Trans A, 2011, vol.42A, pp.974-985.10.1007/s11661-010-0519-5 ↗
24. S.M.Gurevich, V.N.Zamkov, N.A.Kushnirenko: Avtom. Svarka, 1965, vol. 9, pp. 1-4.
25. P.J.Modenesi, E.R.Apolinario, I.M.Pereira: J. Mater. Process. Technol., 2000, vol. 99, pp. 260-265.10.1016/S0924-0136(99)00435-5 ↗
26. S.W.Shyu, H.Y.Huang, K.H.Tseng, C.P.Chou: J. Mater. Eng. Perform., 2008, vol. 17, pp. 193-201.10.1007/s11665-007-9139-7 ↗
27. B.Bonnefois, L.Coudreuse, J.Charles: Welding Intern, 2004, vol.18, pp.208-212.10.1533/wint.2004.3226 ↗
28. N. Perry: PhD Thesis, Université Nantes, 2000.
29. A.G.Simonik: Welding Production, 1976, vol. 3, pp. 49-51.
30. J.J. Lowke, R.W. Liebermann: J Appl Phys, 1971, vol.43, pp. 1991-1994.10.1063/1.1661431 ↗
31. M.M.Savitskii, G.I.Leskov: Avtom Svarka, 1980, vol. 33 (9), pp. 17-22.
32. T.Sándor, J.Dobránszky: Mater Sci Forum, 2007, vol. 537-538, pp. 63-70.10.4028/www.scientific.net/MSF.537-538.63 ↗
33. C.R.Heiple, J.R.Roper: Welding Journal, 1982, vol. 61 (4) pp. 97-102.
34. P. Nicolas: Thése de doctorat, Universite de Nantes, 2000.
35. Y.Wang, Q.Shi, H.L.Tsai: Metall. Mater. Trans., 2001, vol. 32B, pp. 145-161.10.1007/s11663-001-0017-7 ↗
36. Y.Wang, H.L.Tsai: Metall Mater Trans, 2001, vol. 32B, pp. 501-14.10.1007/s11663-001-0035-5 ↗
37. Y.P.Lei, H.Murakawa, Y.W.Shi, X.Y.Li: Comp Mater Sci, 2001, vol.21, pp.276-290.10.1016/S0927-0256(01)00143-4 ↗
38. K.C. Mills, E.D. Hondors, Z. Li: J Mater Sci, 2005, vol. 40, pp. 2403-2409.10.1007/s10853-005-1966-z ↗
39. Y.L.Xu, Z.B.Dong, Y.H.Wei, C.L.Yang: Theor Appl Fracture Mech, 2007, vol.48, pp.178-186.10.1016/j.tafmec.2007.05.004 ↗
40. D.J.Li, S.P.Lu, D.Z.Li, Y.Y.Li: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 528-533.10.1179/136217110X12785889549426 ↗
41. T-S. Chern, K-H. Tseng, H-L. Tsai: Mater Design, 2011, vol.32, pp.255-263.10.1016/j.matdes.2010.05.056 ↗
42. T.J.Park, J.P.Kong, S.H.Uhm, I.S.Woo, J.S.Lee, C.Y.Kang: J Mater Process Technol, 2011, vol.211, pp.415-423.10.1016/j.jmatprotec.2010.10.017 ↗
43. K.-H. Tseng and C.-Y.Hsu: J. Mater. Process. Technol., 2011, vol. 211, pp. 503–12.10.1016/j.jmatprotec.2010.11.003 ↗
44. D.Li, S.Lu, W.Dong, D.Li, Y.Li: J Mater Process Technol, 2012, vol.212, pp.128-136.10.1016/j.jmatprotec.2011.08.015 ↗
45. S.Lu, H.Fujii, K.Nogi: Scripta Mater, 2004, vol.51, pp.271-277.10.1016/j.scriptamat.2004.03.004 ↗
46. S. Lu, H. Fujii, K. Nogi: Mater. Sci. Eng. A, 2004, vol. 380, pp. 290–97.10.1016/j.msea.2004.05.057 ↗
47. S.Lu, H.Fujii, K.Nogi: Metal Mater Trans A, 2004, vol.35A, pp.2861-2866.10.1007/s11661-004-0234-1 ↗
48. S.Lu, H.Fujii, K.Nogi: J Mater Sci, 2005, vol. 40, pp. 2481-2485.10.1007/s10853-005-1979-7 ↗
49. S.Lu, H.Fujii, K.Nogi: J Mater Sci, 2008, vol.43, pp.4583-4591.10.1007/s10853-008-2681-3 ↗
50. H Fuji, T Sato, S Lu and K Nogi: Mater. Sci. Eng. A, 2008, vol.495, pp.296-303.10.1016/j.msea.2007.10.116 ↗
51. J.J.Lowke, M.Tanaka, M.Ushio: J. Phys. D., 2005, vol. 38, pp. 3438-3442.10.1088/0022-3727/38/18/018 ↗
52. K.A. Yushchenko, D.V. Kovalenko, and I.V. Kovalenko: Paton Weld. J., 2001, No. 7, pp. 37–43.
53. Y.H. Xiao: PhD thesis, Delft University of Technology, 1992.
54. A.M.Krouchinin and A.Sawicki: Technical University Czestochowa, Czestochowa, 2003.
55. G.Kaptay: J. Mater. Sci, 2005, vol. 40, pp. 2125-2131.10.1007/s10853-005-1902-2 ↗
56. G.Kaptay, D.M.Stefanescu: AFS Trans, 1992, vol. 213, pp. 707-712.
57. J.W.Cahn: J. Chem. Phys., 1977, vol. 66, pp. 3667-3672.10.1063/1.434402 ↗
58. H.Shim, P.Wynblatt, D.Chatain: Surf Sci Lett, 2001, vol. 476, pp. L273-L277.10.1016/S0039-6028(01)00698-7 ↗
59. S.Dogel, D.Nattland, W.Freyland: Thin Solid Films, 2004, vol. 455-456, pp. 380-383.10.1016/j.tsf.2003.11.232 ↗
60. J.A.V.Butler: Proc. Roy. Soc., 1932, vol. A135, pp. 348-375.
61. J.Brillo, D.Chatain, I.Egry: Int. J. Mat. Res., 2009, vol. 100, pp. 53-58.10.3139/146.101787 ↗
62. Z.Moser, W.Gasior, J.Pstrus, J. Phase Equilibria, 2001, vol. 22, pp. 254-258.10.1361/105497101770338734 ↗
63. G. Kaptay: CALPHAD, 2005, vol. 29, pp. 56–67.10.1016/j.calphad.2005.04.004 ↗
64. C.Mekler, G.Kaptay: Mater. Sci. Eng., 2008, vol. A495, pp. 65-69.10.1016/j.msea.2007.10.111 ↗
65. G.Kaptay: J. Disp. Sci. Technol., 2012, vol.33, pp.130-140.10.1080/01932691.2010.548232 ↗
66. N. Ames and S.Babu: IIW Doc. IX-2195-06.
67. G.Rückert, B.Huneau, S.Marya: Mater Design, 2007, vol.28, pp. 2387-2393.10.1016/j.matdes.2006.09.021 ↗
68. T. Sandor and J. Dobranszky: Proc. 6th Eur. Stainless Steel Conf.: Science and Market, P. Karjalainen and S. Hertzman, eds., Helsinki, Jernkontoret, 2008, pp. 837–842.
69. I. Barin: Thermochemical Properties of Pure Substances, VCh, Weinheim, 1993.
70. T.B. Massalski: Binary Alloy Phase Diagrams, ASM International, Metals Park, OH, 1990.
71. D.Bouchard, C.W.Bale: Metall. Mater. Trans, 1995, vol. 26B, pp. 467-484.10.1007/BF02653863 ↗
72. J.Miettinen: Calphad, 1998, vol. 22, pp. 231-256.10.1016/S0364-5916(98)00026-1 ↗
73. G.Kaptay: Calphad, 2004, vol. 28, pp. 115-124.10.1016/j.calphad.2004.08.005 ↗
74. Y.Tang, X.Yuan, Y.Du: JMM B, 2011, vol. 37, pp. 1-10.
75. C.Guo, C.Li, Z.Du: J. Alloys Compounds, 2009, vol. 492, pp. 122-127.10.1016/j.jallcom.2009.11.101 ↗
76. S.H.Sheng, R.F.Zhang, S.Veprek: Acta Mater, 2011, vol. 59, pp. 3498-3509.10.1016/j.actamat.2011.02.023 ↗
77. Y.Tang, Y.Du, L.Zhang, X.Yuan, G.Kaptay: Thermochim Acta, 2012, vol.527, pp.131-142.10.1016/j.tca.2011.10.017 ↗
78. G.Kaptay: Metall Mater Trans A, 2012, vol.43, pp. 531-543.10.1007/s11661-011-0902-x ↗
79. P.A.Distin, S.G.Whiteway, C.R.Masson: Canad Met Quart, 1971, vol. 10, pp. 13-18.10.1179/000844371795103279 ↗
80. T.Iida, R.I.L.Guthrie: ‘The Physical Properties of Liquid Metals’, Clarendon Press, Oxford, 1993.
81. Slag Atlas, 2nd ed., VDEh Verlag Stahleisen GmbH, Düsseldorf, 1995.
82. G.Kaptay: Mater. Sci. Eng., 2008, vol. A495, pp. 19-26.10.1016/j.msea.2007.10.112 ↗
83. K.Ogino, K.Nogi, C.Hosoi: Tetsu-to-Hagane, 1983, vol. 69, pp. 47-52.10.2355/tetsutohagane1955.69.16_1989 ↗
84. B.J.Keene, K.C.Mills, J.W.Bryant, E.D.Hondros: Canad. Metall. Quart., 1982, vol. 21, pp. 393-403.10.1179/000844382795243461 ↗
85. H.Taimatsu, K.Nogi, K.Ogino: J. High Temp. Soc., 1992, vol. 18, pp. 14-19.
86. Z.Jun, K.Mukai: ISIJ International, 1998, vol. 38, pp. 1039-1044.10.2355/isijinternational.38.1039 ↗
87. I.Seyhan, I.Egry: Int. J. Thermophys., 1999, vol. 20, pp. 1017-1028.10.1023/A:1022638400507 ↗
88. D.Mantha, J.P.Hajra: Metall. Mater. Trans, 2001, vol. 32B, pp. 423-427.10.1007/s11663-001-0027-5 ↗
89. W.M. Small, P. Sahoo, K. Li: Scripta Metall. Mater., 1990, vol. 24, pp. 1155–58.10.1016/0956-716X(90)90316-9 ↗
90. B.Predel: Phase Equilibria, Crystallographic and Thermodynamic Data of Binary Alloys, volume 5 of group IV of Landolt-Börnstein Handbook, Springer, Berlin, pp. 1991–97.