Nanoscale Deformation Behavior of Phase-Reversion Induced Austenitic Stainless Steels: The Interplay Between Grain Size from Nano-Grain Regime to Coarse-Grain Regime
Source abstract
Abstract
We have used the recently adopted concept of phase reversion to obtain grain size from the nanograined/ultrafine-grained (NG/UFG) to fine grain (FG) regime by varying temperature–time annealing sequence of cold deformed metastable austenite. The phase-reversion induced NG/UFG structure was characterized by high strength-high ductility combination. The concept of phase reversion involves severe cold deformation of metastable austenite to generate strain-induced martensite. Upon annealing, martensite transforms back to austenite through a diffusional reversion mechanism with NG/UFG, sub-micron grains (SMG) or FG structure, depending on the annealing condition. Depth-sensing nanoindentation experiments were combined with electron microscopy to elucidate the dependence of grain size from nanograin/ultrafine-grain (NG/UFG) to coarse grain (CG) regime on the deformation mechanisms. There was distinct transition in the deformation mechanism from intense mechanical twinning and stacking faults in NG/UFG structure to strain-induced martensite formation at the intersection of shear bands in the CG structure. The transition in the deformation mechanism is discussed in terms of increase in austenite stability with decrease in grain size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. G. Saada and T. Kruml: Acta Mater., 2011, vol. 59, pp. 2565−74.10.1016/j.actamat.2010.12.035 ↗
2. F. Shen, J. Zhou, Y. Liu, R. Zhu, S. Zhang, and Y. Wang: Comput. Mater. Sci., 2010, vol. 49, pp. 226−35.10.1016/j.commatsci.2010.04.044 ↗
3. S. Cheng, A.D. Stoica, X.-L. Wang, Y. Ren, J. Almer, J.A. Horton, C.T. Liu, B. Clausen, D.W. Brown, P.K. Liaw, and L. Zuo: Phys. Rev. Lett., 2009, vol. 103, pp. 035502-1–035502-4.
4. L. Capolungo, M. Cherkaoui, and J. Qu: Int. J. Plast., 2007, vol. 23, pp. 561–91.10.1016/j.ijplas.2006.05.003 ↗
5. R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans A, 2010, vol. 41A, pp. 2162–74.10.1007/s11661-010-0230-6 ↗
6. R.D.K. Misra, S. Nayak, S. Mali, J. Shah, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans A, 2010, vol. 41A, pp. 3–12.10.1007/s11661-009-0072-2 ↗
7. R.D.K. Misra, S. Nayak, S. Mali, J. Shah, M.C. Somani, and L.P. Karjalainen: Metall. Mater. Trans A, 2009, vol. 40A, pp. 2498–2509.10.1007/s11661-009-9920-3 ↗
8. M.C. Somani, P. Juntunen, L.P. Karjalainen, R.D.K. Misra, and A. Kyrolainen: Metall. Mater. Trans A, 2009, vol. 40A, pp. 729–44.10.1007/s11661-008-9723-y ↗
9. K. Nohara, Y. Ono, and N. Ohashi: J. Iron Steel Inst. Jpn, 1977, vol. 63, pp. 772–82.10.2355/tetsutohagane1955.63.5_772 ↗
10. A. Frehn, E. Ratte, and W. Bleck: Steel Grips, 2004, vol. 2, pp. 447–61.
11. S. Turtletaub and A.S.J. Suiker: Int. J. Solids Mech., 2006, vol. 43, pp. 7322–36.
12. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu, and S. Suresh: Acta Mater., 2005, vol. 53, pp. 2169–79.10.1016/j.actamat.2005.01.031 ↗
13. R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5159–72.10.1016/S1359-6454(03)00365-3 ↗
14. B. Yang, H. Vehoff, and R. Pippan: Mater. Sci. Forum, 2010, vols. 633–634, pp. 85–98.
15. H. Vehoff, D. Lemaire, K. Schuler, T. Waschkies, and B. Yang: Int. J. Mater. Res., 2007, vol. 98, pp. 259–68.10.3139/146.101464 ↗
16. M. Jin, A.M. Minor, D. Ge, and J.W. Morris: J. Mater. Res., 2005, vol. 20, pp. 1735–40.10.1557/JMR.2005.0216 ↗
17. T.-H. Ahn, C.-S. Oh, D.H. Kim, H. Bei, E.P. George, and H.N. Han: Scripta Mater., 2010, vol. 63, pp. 540–43.10.1016/j.scriptamat.2010.05.024 ↗
18. R.D.K. Misra, Z. Zhang, Z. Jia, M.C. Somani, and L.P. Karjalainen: Scripta Mater., 2010, vol. 63, pp. 1057–60.10.1016/j.scriptamat.2010.07.041 ↗
19. R.D.K. Misra, Z. Zhang, Z. Jia, P.K.C. Venkat Surya, M.C. Somani, and L.P. Karjalainen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6958–63.10.1016/j.msea.2011.05.068 ↗
20. K.L. Johnson: Contact Mechanics, Cambridge University, Cambridge, UK, 1985.10.1017/CBO9781139171731 ↗
21. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
22. http://asm.matweb.com/search/SpecificMaterial.=MQ302AL.
23. R.W. Honeycombe: Plastic Deformation of Metals, 2nd ed., Arnold, London, UK, 1984.
24. J. Gil Sevillano: Scripta Mater., 2009, vol. 60, pp. 336–39.10.1016/j.scriptamat.2008.10.035 ↗
25. J. Talonen and H. Hanninen: Acta. Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
26. R. Ueji, N. Tsuchida, D. Terada, N. Tsuji, Y. Tanaka, A. Takemura, and K. Kunishige: Scripta Mater., 2008, vol. 59, pp. 963–66.10.1016/j.scriptamat.2008.06.050 ↗
27. G. Dini, A. Najafizadeh, R. Ueji, and S.M. Monir-Vaghefi: Mater. Des., 2010, vol. 31, pp. 3395–3402.10.1016/j.matdes.2010.01.049 ↗
28. R. Ueji, G. Dini Torkamani, N. Tsuchida, and K. Kunishige: Proceedings of the 2nd International Symposium on Steel Science, ISIJ, Ryoto, 2009, pp. 293–96.
29. I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Mater. Sci Eng. A, 2010, vol. 527, pp. 3552–60.10.1016/j.msea.2010.02.041 ↗
30. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304, pp. 422–26.10.1126/science.1092905 ↗
31. T. Zhu, J. Li, A. Samanta, H. Kim, and S. Suresh: PNAS, 2007, vol. 104, pp. 3031–36.10.1073/pnas.0611097104 ↗
32. K.-C. Chen, W.-W. Wu, C.-N. Liao, L.-J. Chen, and K.N. Tu: Science, 2008, vol. 321, pp. 1066–69.10.1126/science.1160777 ↗
33. L. Lu, M. Dao, T. Zhu, and J. Li: Scripta Mater., 2009, vol. 60, pp. 1062–66.10.1016/j.scriptamat.2008.12.039 ↗
34. L. Lu, X. Chen, and K. Lu: Science, 2009, vol. 323, pp. 607–10.10.1126/science.1167641 ↗
35. K. Lu, L. Lu, and S. Suresh: Science, 2009, vol. 324, pp. 349–52.10.1126/science.1159610 ↗
36. X. Li, Y. Wei, L. Lu, K. Lu, and H. Gao: Nature, 2010, vol. 464, pp. 877–80.10.1038/nature08929 ↗
37. K. Lu: Science, 2010, vol. 328, pp. 319–20.10.1126/science.1185866 ↗
38. F.K. Yan, G.Z. Liu, N.R. Tao, and K. Lu: Acta Mater., 2012, vol. 60, pp. 1059–71.10.1016/j.actamat.2011.11.009 ↗
39. K. Lu, F.K. Yan, H.T. Wang, and N.R. Tao: Scripta Mater., 2012, vol. 66, pp. 878–83.10.1016/j.scriptamat.2011.12.044 ↗
40. L. Lu, Z.S. You, and K. Lu: Scripta Mater., 2012, vol. 66, pp. 837–42.10.1016/j.scriptamat.2011.12.046 ↗
41. T. Zhu and H. Gao: Scripta Mater., 2012, vol. 66, pp. 843–48.10.1016/j.scriptamat.2012.01.031 ↗
42. S. Ni, Y.B. Wang, X.Z. Liao, R.B. Figueiredo, H.Q. Li, S.P. Ringer, T.G. Langdon, and Y.T. Zhu: Acta Mater., 2012, vol. 60, pp. 3181–89.10.1016/j.actamat.2012.02.026 ↗
43. Y.T. Zhu, X.Z. Liao, and X.L. Wc: Prog. Mater. Sci., 2012, vol. 57, pp. 1–62.10.1016/j.pmatsci.2011.05.001 ↗
44. D. Bhattacharya, N.A. Mara, P. Dickerson, R.G. Hoagland, and A. Misra: Philos. Mag., 2010, vol. 90, pp. 1711–24.10.1080/14786430903459691 ↗
45. X. Zhang, A. Misra, H. Wang, M. Tastasi, J.D. Embury, T.E. Mitchell, R.G. Hoagland, and J.P. Hirth: Appl. Phys. Lett., 2004, vol. 84, pp. 1096–98.10.1063/1.1647690 ↗
46. Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, Y.T. Zhu, Z. Horita, and T.G. Langdon: Scripta Mater., 2009, vol. 60, pp. 52–55.10.1016/j.scriptamat.2008.08.032 ↗
47. A.S-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans., 2009, vol. 40A, pp. 3076–89.10.1007/s11661-009-0050-8 ↗
48. J.-H. Jun and C.-S. Choi: Mater. Sci. Eng. A, 1998, vol. 257, pp. 353–56.10.1016/S0921-5093(98)00994-0 ↗
49. Y.H. Zao, X.Z. Liao, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 188–93.