journal article·2013-02

Spark-Plasma Sintering of W-5.6Ni-1.4Fe Heavy Alloys: Densification and Grain Growth

Ke Hu, Xiaoqiang Li, Shengguan Qu, Yuanyuan Li

Publisher page

Abstract

W-5.6Ni-1.4Fe heavy alloys were prepared by the method of spark-plasma sintering, and the densification and grain growth kinetics were analyzed as a function of various parameters such as sintering temperature and dwell duration. It is found that the local temperature gradient at the vicinity of the pores can cause the matrix phase melting or softening, resulting in a viscous layer coating the W particles and an improved solubility of W into the matrix phase. In the initial stage, particle rearrangement and neck formation and growth take place, and γ-(Ni, Fe) matrix phase has formed. Dissolution-precipitation and Ni-enhanced W grain boundary diffusion together with viscous process contribute to the simultaneous densification and grain growth in the intermediate stage. During the final stage, fast grain growth, controlled by both gas-phase diffusion and dissolution-precipitation mechanisms, dominates over the densification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Y. Yu, E.D. Wang, and L.X. Hu: Mater. Sci. Technol., 2006, vol. 14, pp. 385–9.
2. S.H. Hong and H.J. Ryu: Mater. Sci. Eng. A, 2003, vol. 344, pp. 253–60.10.1016/S0921-5093(02)00410-0 ↗
3. Y.B. Zhu, Y. Wang, X.Y. Zhang, and G.W. Qin: Int. J. Refract. Met. Hard Mater., 2007, vol. 25, pp. 275–9.10.1016/j.ijrmhm.2006.08.003 ↗
4. R.M. German: Sintering Theory and Practice, Wiley, New York, NY, 1996.
5. W.D. Cai, Y. Li, R.J. Dowding, F.A. Mohamed, and E.J. Lavernia: Rev. Particulate Mater., 1995, vol. 3, pp. 71–131.
6. S. Raghunathan and D.L. Bourell: P/M Sci. Technol. Briefs, 1999, vol. 1, pp. 9–14.
7. J.L. Fan, B.Y. Huang, and X.H. Qu: Trans. Nonferrous Met. Soc. China, 2000, vol. 10, pp. 57–9.
8. W.E. Gurwell: Proc. International Conference on Tungsten Refract Met-1994, A. Bose and R.J. Dowding, eds., MPIF, Princeton, NJ, 1994, pp. 65–75.
9. T.H. Sylvia, H. Thomas, and S. Theador: Proc. International Conference on Tungsten Refract Met-1994, A. Bose and R.J. Dowding, eds., MPIF, Princeton, NJ, 1994, pp. 169–76.
10. H.J. Ryu, S.H. Hong, and W.H. Baek: J. Mater. Process. Technol., 1997, vol. 63, pp. 292–7.10.1016/S0924-0136(96)02638-6 ↗
11. H.J. Ryu and S.H. Hong: Mater. Sci. Eng. A, 2003, vol. 363, pp. 179–84.10.1016/S0921-5093(03)00641-5 ↗
12. G.C. Wu, Q. You, and D. Wang: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 299–304.10.1016/S0263-4368(99)00015-3 ↗
13. S.H. Hong, S.L. Kang, D.N. Yoon, and W.H. Baek: Metall. Trans. A, 1991, vol. 22A, pp. 1969–74.
14. S. Park, D.K. Kim, S. Lee, H.J. Ryu, and S.H. Hong: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2011–20.10.1007/s11661-001-0013-1 ↗
15. K.H. Lee, S.I. Cha, H.J. Ryu, and S.H. Hong: Mater. Sci. Eng. A, 2007, vol. 458, pp. 323–29.10.1016/j.msea.2007.01.118 ↗
16. A. Upadhyaya, S.K. Tiwari, and P. Mishra: Scripta Mater., 2007, vol. 56, pp. 5–8.10.1016/j.scriptamat.2006.09.010 ↗
17. G. Prabhu, A. Chakraborty, and B. Sarma: Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 545–48.10.1016/j.ijrmhm.2008.07.001 ↗
18. X.Q. Li, H.W. Xin, K. Hu, and Y.Y. Li: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. 443–49.10.1016/S1003-6326(09)60160-6 ↗
19. J.R. Groza: Met. Powder Rep., 2000, vol. 55, pp. 16–18.
20. S. Kandukuri: Met. Powder Rep., 2008, vol. 63, pp. 22–27.10.1016/S0026-0657(08)70161-9 ↗
21. K. Hu, X. Li, C. Yang, and Y. Li: Trans. Nonferrous Met. Soc. China, 2011, vol. 21, pp. 493–501.10.1016/S1003-6326(11)60742-5 ↗
22. J. Räthel, M. Herrmann, and W. Beckert: J. Eur. Ceram. Soc., 2009, vol. 29, pp. 1419–25.10.1016/j.jeurceramsoc.2008.09.015 ↗
23. A. Zavaliangos, J. Zhang, M. Krammer, and J.R. Groza: Mater. Sci. Eng. A, 2004, vol. 379, pp. 218–28.10.1016/j.msea.2004.01.052 ↗
24. S.J. Park, J.M. Martin, J.F. Guo, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3337–46.10.1007/BF02586168 ↗
25. Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96, ASTM, Philadelphia, PA, 1996, p. 16.
26. U. Anselmi-Tamburini, J.E. Garay, and Z.A. Munir: Mater. Sci. Eng. A, 2005, vol. 407, pp. 24–30.10.1016/j.msea.2005.06.066 ↗
27. Y. Aman, V. Garnier, and E. Djurado: J. Mater. Sci., 2012, vol. 47, pp. 5766–73.10.1007/s10853-012-6469-0 ↗
28. A. Cordier, M. Kleitz, and M.C. Steil: J. Eur. Ceram. Soc., 2012, vol. 32, pp. 1473–79.10.1016/j.jeurceramsoc.2011.12.022 ↗
29. D. Demirskyi, H. Borodianska, D. Agrawal, A. Ragulya, Y. Sakka, and O. Vasylkiv: J. Alloys Compd., 2012, vol. 523, pp. 1–10.10.1016/j.jallcom.2012.01.146 ↗
30. J.M. Frei, U. Anselmi-Tamburini, and Z.A. Munir: J. Appl. Phys., 2007, vol. 101, pp. 114914–21.10.1063/1.2743885 ↗
31. N. Toyofuku, T. Kuramoto, T. Imai, M. Ohyanagi, and Z.A. Munir: J. Mater. Sci., 2012, vol. 47, pp. 2201–05.10.1007/s10853-011-6026-2 ↗
32. S.J. Park, J.M. Martin, J.F. Guo, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2837–48.10.1007/BF02586116 ↗
33. C. Chausse and F. Nardou: Mater. High Temp., 1999, vol. 16, pp. 37–41.10.3184/096034099783641245 ↗
34. M. Gendre, A. Maître, and G. Trolliard: Acta Mater., 2010, vol. 58, pp. 2598–2609.10.1016/j.actamat.2009.12.046 ↗
35. J. Langer, M.J. Hoffmann, and O. Guillon: Acta Mater., 2009, vol. 57, pp. 5454–65.10.1016/j.actamat.2009.07.043 ↗
36. J. Langer, M.J. Hoffmann, and O. Guillon: J. Am. Ceram. Soc., 2011, vol. 94, pp. 24–31.10.1111/j.1551-2916.2010.04016.x ↗
37. J. Langer, M.J. Hoffmann, and O. Guillon: J. Am. Ceram. Soc., 2011, vol. 94, pp. 2344–53.10.1111/j.1551-2916.2011.04396.x ↗
38. S.-J.L. Kang: Sintering, Densification, Grain Growth and Microstructure, Elsevier Butterworth Heinemann, Oxford, U.K., 2005, pp. 39–56.
39. R.L. Coble: J. Appl. Phys., 1970, vol. 41, pp. 4798–4807.10.1063/1.1658543 ↗
40. K. Wang, Z. Fu, W. Wang, Y. Wang, J. Zhang, and Q. Zhang: J. Mater. Sci., 2007, vol. 42, pp. 302–06.10.1007/s10853-006-1013-8 ↗
41. X. Song, X. Liu, and J. Zhang: J. Am. Ceram. Soc., 2006, vol. 89, pp. 494–500.10.1111/j.1551-2916.2005.00777.x ↗
42. D. Demirskyi, H. Borodianska, S. Grasso, Y. Sakka and O. Vasylkiv: Scripta Mater., 2011, vol. 65, pp. 683–6.10.1016/j.scriptamat.2011.07.006 ↗
43. K.R. Anderson, J.R. Groza, M. Fendorf, and C.J. Echer: Mater. Sci. Eng. A, 1999, vol. 270, pp. 278–82.10.1016/S0921-5093(99)00197-5 ↗
44. J.R. Groza and A. Zavaliangos: Mater. Sci. Eng. A, 2000, vol. 287, pp. 171–77.10.1016/S0921-5093(00)00771-1 ↗
45. Z.A. Munir, D.V. Quach, and M. Ohyanagi: J. Am. Ceram. Soc., 2011, vol. 94, pp. 1–19.10.1111/j.1551-2916.2010.04210.x ↗
46. M.N. Rahaman: Ceramics Processing and Sintering, 2nd ed., Marcel Dekker, New York, NY, 2003, pp. 514–39.
47. L.A. Stanciu, V.Y. Kodash, and J.R. Groza: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2633–38.10.1007/s11661-001-0053-6 ↗
48. E.A. Olevsky and L. Froyen: J. Am. Ceram. Soc., 2009, vol. 92, pp. 122–32.10.1111/j.1551-2916.2008.02705.x ↗
49. B. Wilthan, C. Cagran, and G. Pottlacher: Int. J. Thermophys., 2005, vol. 26, pp. 1017–29.10.1007/s10765-005-6682-z ↗
50. G.K. White and S.J. Collocott: J. Phys. Chem. Ref. Data, 1984, vol. 13, pp. 1251–57.10.1063/1.555728 ↗
51. R. Chaim, R. Marder-Jaeckel, and J.Z. Shen: Mater. Sci. Eng. A, 2006, vol. 429, pp. 74–78.10.1016/j.msea.2006.04.072 ↗
52. I.H. Moon, K.Y. Kim, S.T. Oh, and M.J. Suk: J. Alloys Compd., 1993, vol. 201, pp. 129–37.10.1016/0925-8388(93)90873-L ↗
53. S.-J.L. Kang: Sintering, Densification, Grain Growth and Microstructure, Elsevier Butterworth Heinemann, Oxford, 2005, pp. 145–62.