journal article·2012-02

Effect of Iron Content on Sintering Behavior of Ti-V-Fe-Al Near-β Titanium Alloy

Dmytro G. Savvakin, Andrew Carman, Orest M. Ivasishin, Mykhailo V. Matviychuk, Azdiar A. Gazder, Elena V. Pereloma

Publisher page

Abstract

Two near-β Ti-10V-3Fe-3Al and Ti-10V-2Fe-3Al alloys were produced by blended elemental powder metallurgy using hydrogenated titanium and V-Fe-Al master alloy powders. The distributions of the alloying elements were investigated at different stages of transformation of the heterogeneous powder compacts into the final homogeneous alloy product. The influence of iron content on chemical homogenization, densification, microstructure, and mechanical properties of as-sintered alloys was discussed with respect to the fast diffusion mobility of iron in titanium. It was concluded that a 1 pct increase in Fe content, as the alloying element with the fastest diffusivity in titanium, has a positive effect on densification. However, this also results in some grain coarsening of the final material. The attained mechanical properties were comparable with those of cast/wrought near-beta titanium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. G. Lutjering and J.C. Williams: Titanium, 2nd ed., Springer-Verlag, Berlin Germany, 2007, p. 442.
2. F.H. Froes and D. Eylon: Int. Mater. Rev., 1990, vol. 35, no. 3, pp. 162-82.10.1179/095066090790323984 ↗
3. V.S. Moxson, O.N. Senkov, and F.H. Froes: Int. J. Powder Metall., 1998, vol. 34, no. 5, pp. 45-53.
4. J.E. Barnes, W. Peter, and C.A. Blue: Mater. Sci. Forum, 2009, vols. 618–619, pp. 165-71.10.4028/www.scientific.net/MSF.618-619.165 ↗
5. M. Hagiwara, Y. Kaieda, Y. Kawabe, and S. Miura: ISIJ Int., 1991, vol. 31, no. 8, pp. 922-30.10.2355/isijinternational.31.922 ↗
6. T. Fujita, A. Ogawa, C. Ouchi, and H. Tajima: Mater. Sci. Eng. A, 1996, vol. 213, pp. 148-53.10.1016/0921-5093(96)10232-X ↗
7. M. Hagiwara and S. Emura: Mater. Sci. Eng. A, 2003, vol. 352, pp. 85-92.10.1016/S0921-5093(02)00897-3 ↗
8. T. Saito, H. Takamiya, and T. Furuta: Mater. Sci. Eng. A, 1998, vol. 243, pp. 273-78.10.1016/S0921-5093(97)00813-7 ↗
9. R.R. Boyer and R.D. Briggs: J. Mater. Eng. Perform., 2005, vol. 14, no 6, pp. 681-85.10.1361/105994905X75448 ↗
10. O.M. Ivasishin and D.G. Savvakin: Key Eng. Mater., 2010, vol. 436, pp. 113-21.10.4028/www.scientific.net/KEM.436.113 ↗
11. O.M. Ivasishin, D. Eylon, V.I. Bondarchuk, and D.G. Savvakin: Defect Diffusion Forum, 2008, vol. 277, pp. 177-85.10.4028/www.scientific.net/DDF.277.177 ↗
12. W. Wei, Y. Liu, K. Zhou, and B. Huang: Powder Metall., 2003, vol. 46, pp. 246-50.10.1179/003258903225005295 ↗
13. Y. Liu, L.F. Chen, H.P. Tang, C.T. Liu, B. Liu, and B.Y. Huang: Mater. Sci. Eng. A, 2006, vol. 418, pp. 25-35.10.1016/j.msea.2005.10.057 ↗
14. O.M. Ivasishin, D.G. Savvakin, X.O. Bondareva, and O.I. Dekhtyar: Proc. 10 th World Conf. on Titanium (2003), vol. 1, Wiley-Vch Verlag, Weinheim, Germany, 2004, pp. 495–502.
15. H. Nakajima, M. Koiwa, Y. Minonishi, and S. Ono: Trans. JIM, 1983, vol. 24, pp. 655-60.10.2320/matertrans1960.24.655 ↗
16. R.F. Peart and D.H. Tomlin: Acta Metall., 1962, vol. 10, pp. 123-34.10.1016/0001-6160(62)90057-3 ↗
17. T.D. Massalski: Binary Alloys Phase Diagrams, Eds. H. Okamoto, P.R. Subramanian, and L. Kasprzak, ASM International, Materials Park, OH, 1990.
18. G. Neumann and C. Tuijn: Self-diffusion and Impurity Elements Diffusion in Pure Metals: Handbook of Experimental Data, Pergamon Materials Series, vol. 14, Elsevier, Amsterdam, The Netherlands, 2008, pp. 1–349.10.1016/S1470-1804(08)00010-2 ↗
19. Z. Liu and G. Welsch: Metall. Trans. A, 1991, vol. 22A, pp. 946-47.10.1007/BF02659006 ↗