journal article·2011-11

Characterization and High-Temperature Oxidation Behavior of Cold-Sprayed Ni-20Cr and Ni-50Cr Coatings on Boiler Steels

Niraj Bala, Harpreet Singh, Satya Prakash

Publisher page

Abstract

Microstructure and mechanical properties of cold-spray coatings are usually required in order to explore the potential industrial application of the latter. This article demonstrates the successful formulation of Ni-20Cr and Ni-50Cr coatings on two boiler steels, namely, SAE 213-T22 and SA 516 steel by cold-spray process. The microstructure, coating thickness, phase formation, and microhardness properties of the coatings were evaluated. The coatings were subjected to cyclic heating and cooling cycles at an elevated temperature of 1173.15 K (900 °C) to ascertain their high-temperature oxidation behavior. Moreover, these cyclic exposures can give useful information regarding the adhesion of the coatings with the substrate steels. Of all the coatings, the Ni-50Cr coating on SA 516 steel had a maximum average hardness value of 469 Hv. As observed from the surface field emission–scanning electron microscopy (FE-SEM) analysis, the coatings were found to have nearly dense microstructure with the sprayed particles in interlocked positions. It was concluded that the cold-spray process is suitable for spraying the preceding powders onto the given boiler steels to produce nearly dense and low oxide coatings. The coatings, in general, were found to follow the parabolic rate of oxidation and were successful in maintaining their surface contact with their respective substrate steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. T. Stoltenhoff, H. Kreye, H.J. Richter, and H. Assadi: in Optimization of the Cold Spray Process, Thermal Spray 2001: New Surfaces for a Millennium, C.C. Berndt, K.A. Khor, and E.F. Lugscheider, eds., ASM INTERNATIONAL, Materials Park, OH, 2001, pp. 409–16.
2. J. Karthikeyan: “Cold Spray Technology: International Status and USA Efforts: A Report,” ASB Industries, Inc., Barberton, OH, 2004, pp. 1–14.
3. R.C. Mccune, A.N. Papyrin, J.N. Hall, W.L. Riggs II, and P.H. Zajchowski: in Advances in Thermal Spray Science and Technology, C. Berndt and S. Sampath, eds., ASM INTERNATIONAL, Materials Park, OH, 1995.
4. Futuretech: Cold Gas-Dynamic Spray Method, John Wiley and Sons, Englewood, NJ, Aug. 1998, No. 224.
5. A.P. Alkhimov, V.F. Kosarev, N.I. Nesterovich, A.N. Papyrin, and M.M. Shushpanov: US Patent No. 5,302,414, Apr. 12, 1994.
6. R.C. Dykhuizen and M.F Smith: J. Therm. Spray Technol., 1998, vol. 7 (2), pp. 205–12.10.1361/105996398770350945 ↗
7. V. Shukla, G. Elliott, and B. Kear: 37th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, Jan. 11–14, American Inst. of Aeronautics and Astronautics, Reston, VA, 1999, p. 1.
8. R.S. Lima, J. Karthikeyan, C.M. Kay, J. Lindemann, and C.C. Berndt: Thin Solid Films, 2002, vol. 416, pp. 129–35.10.1016/S0040-6090(02)00631-4 ↗
9. R. Knight and R.W. Smith: Thermal Spray: Int. Advances in Coatings Technology, Orlando, FL, May 25–June 5, 1992, C.C. Berndt, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, p. 159.
10. M.R. Dorfman and J.A. DeBarro: Thermal Spraying: Current and Future Trends, Kobe, Japan, May 22–26, 1995, Akira Ohmori, ed., High Temperature Society of Japan, 1995, p. 567.
11. H. Edris, D.G. McCartney, and A.J. Sturgeon: J. Mater. Sci., 1997, vol. 32, pp. 863–72.10.1023/A:1018589230250 ↗
12. N. Bala, H. Singh, and S. Prakash: Appl. Surf. Sci., 2009, vol. 255 (15), pp. 6862–69.10.1016/j.apsusc.2009.03.006 ↗
13. W.M. Zhao, Y. Wang, T. Han, K.Y. Wu, and J. Xue: Surf. Coat. Technol., 2004, vol. 183, pp. 118–25.10.1016/j.surfcoat.2003.09.053 ↗
14. W.M. Zhao, Y. Wang, L.X. Dong, K.Y. Wu, and J. Xue: Surf. Coat. Technol., 2005, vol. 190, pp. 293–98.10.1016/j.surfcoat.2004.04.057 ↗
15. R.C. Tucker, Jr.: in Handbook of Deposition Technologies for Films and Coatings, R.F. Bunshah, ed., Noyes Pub., Park Ridge, NJ/William Andrew Publishing, LLC, Norwich, NY, 1994, p. 591.
16. V.H. Hidalgo, F.J.B. Varela, and E.F. Rico: Trib. Int., 1997, vol. 30 (9), pp. 641–49.10.1016/S0301-679X(97)00029-7 ↗
17. V.H. Hidalgo, F.J.B. Varela, and A.C. Menendez: Proc. 15th Int. Thermal Spray Conf., Nice, France, May 25–29, ASM International, Novelty, OH, 1998, pp. 617–21.
18. V.H. Hidalgo, F.J.B. Varela, S.P. Martinez, and S.G. Espana: Proc. United Thermal Spray Conf., Dusseldorf, Germany, DVS-Verlag, Germany, 1999, pp. 683–86.
19. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V. Fomin: in Cold Spray Technology, A. Papyrin, ed., Elsevier, New York, NY, 2007.
20. C. Verdon, A. Karimi, and J.L. Martin: Mater. Sci. Eng. A, 1998, vol. 246, pp. 11–24.10.1016/S0921-5093(97)00759-4 ↗
21. H.M. Hawthorne, B. Arsenault, J.P. Immarigeon, J.G. Legoux, and V.R. Parameswaran: Wear, 1999, vols. 225–229, pp. 825–34.10.1016/S0043-1648(99)00034-4 ↗
22. S. Sampath, X.Y. Jiang, J. Matejicek, L. Prchlik, A. Kulkarni, and A. Vaidya: Mater. Sci. Eng. A, 2004, vol. 364, pp. 216–31.10.1016/j.msea.2003.08.023 ↗
23. B. Singh: Ph.D. Thesis, Indian Institute of Technology Roorkee, Roorkee, India, 2003.
24. H. Singh: Ph.D. Thesis, Indian Institute of Technology Roorkee, Roorkee, India, 2005.
25. H. Kaushal, H. Singh, and S. Prakash: Metall. Mater. Trans. A,, 2011, vol. 42A, pp. 1836–46.10.1007/s11661-010-0587-6 ↗
26. H.Y. Lee, H.Y. Young, C.L. Young, P.H. Young, and H.K. Kyung: J. Therm. Spray Technol., 2005, vol. 14 (2), pp. 183–86.10.1361/105996304523791 ↗
27. J.R. Nicholls: JOM, 2000, Jan., pp. 28–35.10.1007/s11837-000-0112-2 ↗
28. S.N. Tiwari and S. Prakash: Proc. SOLCEC, Kalpakkam, India, Jan. 22–24, 1997, paper no. C33.
29. A. Ul-Hamid: Mater. Chem. Phys., 2003, vol. 80, pp. 135–42.10.1016/S0254-0584(02)00448-0 ↗
30. B.S. Sidhu and S. Prakash: Surf. Coat. Technol., 2003, vol. 166, pp. 89–100.10.1016/S0257-8972(02)00772-7 ↗
31. D. Das, R. Balasubramaniam, and M.N. Mungole: J. Mater. Sci., 2002, vol. 37 (6), pp. 1135–42.10.1023/A:1014307219963 ↗
32. Y. Longa-Nava, Y.S. Zhang, M. Takemoto, and R.A. Rapp: Corros., 1996, vol. 52 (9), pp. 680–89.10.5006/1.3292158 ↗
33. G. Calvarin, R. Molins, and A.M. Huntz: Oxid. Met., 2000, vol. 53 (1–2), pp. 25–48.10.1023/A:1004578513020 ↗
34. H. Singh, D. Puri, S. Prakash, and R. Maiti: Mater. Sci. Eng. A, 2007, vol. 464 (1), pp. 110–16.10.1016/j.msea.2007.01.088 ↗
35. T.S. Sidhu: Ph.D. Thesis, Indian Institute of Technology Roorkee, Roorkee, India, 2006.
36. H.S. Sidhu: Ph.D. Thesis, Punjab Technical University, Jalandhar, India, 2006.
37. F.H. Stott and G.C. Wood: Mater. Sci. Technol., 1998, vol. 4, pp. 1072–78.10.1179/mst.1988.4.12.1072 ↗
38. S.R.J. Saunders and J.R. Nicholls: Mater. Sci. Technol., 1998, vol. 5, pp. 780–98.10.1179/mst.1989.5.8.780 ↗
39. S. Kamal, R. Jayaganthan, S. Prakash, and S. Kumar: J. Alloys Compd., 2008, vol. 463 (1–2), pp. 358–72.10.1016/j.jallcom.2007.09.019 ↗
40. F.H. Stott: Trib. Int., 1998, vol. 31 (1–3), pp. 61–71.10.1016/S0301-679X(98)00008-5 ↗
41. U.K. Chatterjee, S.K. Bose, and S.K. Roy: Environmental Degradation of Metals, Marcel Dekker, New York, NY, 2001.10.1201/9781482292244 ↗
42. T. Sundararajan, S. Kuroda, T. Itagaki, and F. Abe: ISIJ Int., 2004, vol. 44, pp. 139–44.10.2355/isijinternational.44.139 ↗
43. C. Burman and T. Ericsson: Proc. Symp. High-Temperature Protective Coatings, Atlanta, GA, Mar. 7–8, 1983, S.C. Singhal, ed., TMS-AIME, Warrendale, PA, 1983, pp. 51–59.