Energy and Force Analysis of Ti-6Al-4V Linear Friction Welds for Computational Modeling Input and Validation Data
Source abstract
Abstract
Abstract The linear friction welding (LFW) process is finding increasing use as a manufacturing technology for the production of titanium alloy Ti-6Al-4V aerospace components. Computational models give an insight into the process, however, there is limited experimental data that can be used for either modeling inputs or validation. To address this problem, a design of experiments approach was used to investigate the influence of the LFW process inputs on various outputs for experimental Ti-6Al-4V welds. The finite element analysis software DEFORM was also used in conjunction with the experimental findings to investigate the heating of the workpieces. Key findings showed that the average interface force and coefficient of friction during each phase of the process were insensitive to the rubbing velocity; the coefficient of friction was not coulombic and varied between 0.3 and 1.3 depending on the process conditions; and the interface of the workpieces reached a temperature of approximately approximately 1273 K (1000 °C) at the end of phase 1. This work has enabled a greater insight into the underlying process physics and will aid future modeling investigations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Turner, R., Gebelin, J.-C., Ward, R. M. & Reed, R. C. Linear Friction Welding of Ti–6Al–4V: Modelling and Validation. Acta Materialia 59, 3792–3803 (2011).10.1016/j.actamat.2011.02.028 ↗
2. A.C. Addison: Report—894/2008. Granta 44, 2008.
3. Vairis, A. & Frost, M. On the Extrusion Stage of Linear Friction Welding of Ti 6Al 4V. Materials Science and Engineering A 271, 477–484 (1999).10.1016/S0921-5093(99)00449-9 ↗
4. Wanjara, P. & Jahazi, M. Linear Friction Welding of Ti-6Al-4V: Processing, Microstructure, and Mechanical-Property Inter-Relationships. Metallurgical and Materials Transactions A 36A, 2149–2164 (2005).10.1007/s11661-005-0335-5 ↗
5. Vairis, A. & Frost, M. High Frequency Linear Friction Welding of a Titanium Alloy. Wear 217, 117–131 (1998).10.1016/S0043-1648(98)00145-8 ↗
6. Ofem, U. U., Colegrove, P. A., Addison, A. & Russell, M. J. Energy and Force Analysis of Linear Friction Welds in Medium Carbon Steel. Science and Technology of Welding and Joining 15, 479–485 (2010).10.1179/136217110X12731414739790 ↗
7. Turner, R., Ward, R. M., March, R. & Reed, R. C. The Magnitude and Origin of Residual Stress in Ti-6Al-4V Linear Friction Welds: An Investigation by Validated Numerical Modeling. Metallurgical and Materials Transactions B 43B, 186–197 (2011).
8. Grujicic, M., Arakere, G., Pandurangan, B., Yen, C. F. & Cheeseman, B. A. Process Modeling of Ti-6Al-4V Linear Friction Welding (LFW). Journal of Materials Engineering and Performance 21, 2011–2023 (2011).10.1007/s11665-011-0097-8 ↗
9. Tao, J., Zhang, T., Liu, P., Li, J. & Mang, Y. Numerical Computation of a Linear Friction Welding Process. Materials Science Forum 575 -578, 811–815 (2008).10.4028/www.scientific.net/MSF.575-578.811 ↗
10. Vairis, A. & Frost, M. Modelling the Linear Friction Welding of Titanium Blocks. Materials Science and Engineering A 292, 8–17 (2000).10.1016/S0921-5093(00)01036-4 ↗
11. Romero, J., Attallah, M. M., Preuss, M., Karadge, M. & Bray, S. E. Effect of the Forging Pressure on the Microstructure and Residual Stress Development in Ti–6Al–4V Linear Friction Welds. Acta Materialia 57, 5582–5592 (2009).10.1016/j.actamat.2009.07.055 ↗
12. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4230–38.10.1007/s11661-013-1767-y ↗
13. I. Bhamji, M. Preuss, P.L. Threadgill, and A.C. Addison. Mater. Sci. Technol., 2011, vol. 27, pp. 2–12.10.1179/026708310X520510 ↗
14. A.C Addison: TWI Industrial Members Report—961/2010. Main 44, 2010.
15. D.C. Montgomery: Design and Analysis of Experiments. John Wiley and Sons Inc., Hoboken, 2000, pp. 60–125.
16. B. Bhushan: Introduction to Tribology. Wiley, New York, 2002, 99, 199, 560.
17. F.P. Bowden and D. Tabor. The Friction and Lubrication of Solids. Oxford University Press, New York, 1950, p. 10.