Analysis of Microstructural Changes Induced by Linear Friction Welding in a Nickel-Base Superalloy
Source abstract
Abstract
A detailed microstructural analysis was performed on a difficult-to-weld nickel-base superalloy, IN 738, subjected to linear friction welding and Gleeble thermomechanical simulation, to understand the microstructural changes induced in the material. Correlations between the microstructures of the welded and simulated materials revealed that, in contrast to a general assumption of linear friction welding being an exclusively solid-state joining process, intergranular liquation, caused by nonequilibrium phase reaction(s), occurred during joining. However, despite a significant occurrence of liquation in the alloy, no heat-affected zone (HAZ) cracking was observed. The study showed that the manufacturing of crack-free welds by linear friction welding is not due to preclusion of grain boundary liquation, as has been commonly assumed and reported. Instead, resistance to cracking can be related to the counter-crack-formation effect of the imposed compressive stress during linear friction welding and strain-induced rapid solidification. Moreover, adequate understanding of the microstructure of the joint requires proper consideration of the concepts of nonequilibrium liquation reaction and strain-induced rapid solidification, which are carefully elucidated in this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. M. Prager and C.S. Shira: Weld. Res. Council Bull., 1968, vol. 128, pp. 1–55.
2. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Mater. Sci. Technol., 2004, vol. 20, pp. 1027–34.10.1179/026708304225019948 ↗
3. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 421–33.10.1007/s11661-006-0013-2 ↗
4. A.T. Egbewande, H.R. Zhang, R.K. Sidhu, and O.A. Ojo: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1694–2704.
5. C. Mary and M. Jahazi: Adv. Eng. Mater., 2008, vol. 10, pp. 573–78.10.1002/adem.200700361 ↗
6. A. Vairis and M. Fros: Wear, 1998, vol. 217, pp. 117–31.10.1016/S0043-1648(98)00145-8 ↗
7. M. Karadge, M. Preuss, P.J. Withers, and S. Bray: Mater. Sci. Eng. A, 2008, vol. 491, pp. 446–53.10.1016/j.msea.2008.04.064 ↗
8. A.N. Davies: Exploiting Friction Welding in Production, The Welding Institute, Cambridge, United Kingdom, 1979, pp. 20–29.
9. S. Vardhan Lalam, G. Madhusudhan Reddy, T. Mohandas, M. Kamaraj, and B.S. Murty: Mater. Sci. Technol., 2009, vol. 25, pp. 851–61.10.1179/174328408X369384 ↗
10. M. Preuss, J.W.L. Pang, P.J. Withers, and G.J. Baxter: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3215–25.10.1007/s11661-002-0307-y ↗
11. F. Daus, H.Y. Li, G. Baxter, S. Bray, and P. Bowen: Mater. Sci. Technol., 2007, vol. 23, pp. 1424–32.10.1179/174328407X243997 ↗
12. M. Soucail and Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. 220, pp. 215–22.10.1016/S0921-5093(97)80011-1 ↗
13. O.M. Barabash, R.I. Barabash, G.E. Ice, Z. Feng, and D. Gandy: Mater. Sci. Eng. A, 2009, vol. 524, pp. 10–19.10.1016/j.msea.2009.03.086 ↗
14. M. Soucail, A. Moal, L. Naze, E. Massoni, C. Levaillant, and Y. Bienvenu: Superalloys 1992, TMS, Warrendale, PA, 1992, pp. 847–56.10.7449/1992/Superalloys_1992_847_856 ↗
15. B.I. Bjorneklett, O. Grong, O.R. Myhr, and A.O. Kluken: Acta Mater., 1998, vol. 46, pp. 6257–66.10.1016/S1359-6454(98)00260-2 ↗
16. D.L. Sponseller: Superalloys Conf., TMS, Champion, PA, 1996, pp. 259–70.10.7449/1996/Superalloys_1996_259_270 ↗
17. E. Dalgaard, P. Wanjara, X. Cao, J. Gholipour, and J.J. Jonas: Aerospace Materials & Manufacturing: Advances in Materials, Processes and Repair Technologies, 49th Annual Conf. of Metallurgists (COM2010, Vancouver), CIM, Montreal, 2010, pp. 69–78.
18. J.J. Pepe and W.F. Savage: Weld. J., 1967, vol. 46, pp. 411s–422s.
19. O.A. Ojo and M.C. Chaturvedi: Mater. Sci. Eng. A, 2005, vol. 403, pp. 77–86.10.1016/j.msea.2005.04.034 ↗
20. R. Rosenthal and D.R.F. West: Mater. Sci. Technol., 1999, vol. 15, pp. 1387–94.10.1179/026708399101505518 ↗
21. M.J. Whelan: Met. Sci. J., 1969, vol. 3, pp. 95–97.10.1179/msc.1969.3.1.95 ↗
22. A.K. Jena and M.C. Chaturvedi: in Phase Transformation in Materials, Brendan M. Stewart, ed., Prentice-Hall Inc., Englewood Cliffs, NJ, 1992, pp. 66–131.
23. N.E.B. Cowern, P.C. Zalm, P. Van der Sluis, D.J. Gravensteijn, and W.B. de Boer: Phys. Rev. Lett., 1994, vol. 72, pp. 2585–88.10.1103/PhysRevLett.72.2585 ↗
24. P. Kringhøj, A.N. Larsen, and S.Y. Shirayev: Phys. Rev. Lett., 1996, vol. 76, pp. 3372–75.10.1103/PhysRevLett.76.3372 ↗
25. M. Onishi and H. Miura: Trans. JIM, 1977, vol. 18, pp. 107–12.10.2320/matertrans1960.18.107 ↗
26. S.W. Baker and G.R. Purdy: Acta Mater., 1998, vol. 46, pp. 511–24.10.1016/S1359-6454(97)00267-X ↗
27. E. Nes: Met. Sci., 1979, vol. 13 (3–4), pp. 211–15.10.1179/msc.1979.13.3-4.211 ↗
28. C.R. Hutchinson, P.T. Loo, T.J. Bastow, A.J. Hill, and J. da Costa Teixeira: Acta Mater., 2009, vol. 57, pp. 5645–53.10.1016/j.actamat.2009.07.060 ↗
29. V.V. Sagaradze, V.A. Shabashov, T.M. Lapina, N.L. Pecherkina, and V.P. Pilyugin: Phys. Met. Metallogr., 1994, vol. 78 (6), pp. 619–28.
30. Y. Ivanisenko: Mater. Sci. Forum, 2007, vols. 539–543, pp. 4681–86.10.4028/www.scientific.net/MSF.539-543.4681 ↗
31. F. Ju, Z. Xa, B.J. Diak, O.A. Ojo, W.D. MacDonald, and M. Niewczas: Magnesium Science and Technology—Automotive Lightweighting, Detroit, MI, Apr. 14–17, 2008.
32. X. Zhao, X. Lin, J. Chen, L. Xue, and W. Huang: Mater. Sci. Eng. A, 2009, vol. 504, pp. 129–34.10.1016/j.msea.2008.12.024 ↗
33. Y.-C. Kim and A. Fuji: Sci. Technol. Weld. Join., 2002, vol. 7 (3), pp. 149–54.10.1179/136217102225004185 ↗
34. M. Preuss, P.J. Wither, and G.J. Baxter: Mater. Sci. Eng., A, 2006, vol. 437, pp. 38–45.10.1016/j.msea.2006.04.058 ↗
35. M. Karadge, P. Frankel, A Steuwer, C. Lovell, S. Bray, P.J. Withers, and M. Preuss: Joining of Advanced and Specialty Materials, Materials Science and Technology (MS&T), 2006: Product Manufacturing, pp. 35–44.
36. J.D. Embury, A. Deschamps, and Y. Brechet: Scripta Mater., 2003, vol. 49, pp. 927–32.10.1016/S1359-6462(03)00479-2 ↗
37. B. Radhakrishnan and R.G. Thompson: Metall. Mater. Trans. A, 1992, vol. 23A, pp. 1783–98.10.1007/BF02804371 ↗
38. J. Li, J. Wang, and G. Yang: J. Cryst. Growth, 2009, vol. 311, pp. 1217–22.10.1016/j.jcrysgro.2008.11.078 ↗
39. O.A. Ojo, N.L. Richards, and M.C. Chaturvedi: Scripta Mater., 2004, vol. 51, pp. 141–46.10.1016/j.scriptamat.2004.03.040 ↗
40. M. Hillert: Scripta Metall., 1983, vol. 17, pp. 237–40.10.1016/0036-9748(83)90105-9 ↗
41. C.A. Handwerker, J.W. Cahn, D.N. Yoon, and J.E. Blendell: in Diffusion in Solids: Recent Developments, M.A. Dayananda and G.E. Murch, eds., TMS, Warrendale, PA, 1985, pp. 275–92.
42. J.W. Matthews: in Dislocations in Solids, F.R.N. Nabarro, ed., North Holland, Amsterdam, 1979, vol. 2.
43. Y. Brechet and G.R. Purdy: Scripta Metall., 1988, vol. 22, pp. 1629–33.10.1016/S0036-9748(88)80255-2 ↗
44. W. Lin, J.C. Lippold, and W.A. Baeslack III: Weld J., 1993, vol. 72, pp. 135s–153s.
45. Y. Lu, M. Li, W. Huang, and H. Jiang: Mater. Character., 2005, vol. 54, pp. 423–30.10.1016/j.matchar.2005.01.013 ↗
46. D. Zhang, B. Yang, J. Zhang, Y. Zhang, and B. Xiong: Trans. Nonferrous Met. Soc. China, 2005, vol. 15, pp. 1125–29.
47. C. Mary and M. Jahazi: Adv. Mater. Res., 2006, vols. 15–17, p. 357.10.4028/www.scientific.net/AMR.15-17.357 ↗
48. S. Swaminathan, K. Oh-Ishi, A.P. Zhilyaev, C.B. Fuller, B. London, M.W. Mahoney, and T.R. Mcnelley: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 631–40.10.1007/s11661-009-0140-7 ↗