journal article·2020-03Open access

The Effect of Powder Characteristics on Build Quality of High-Purity Tungsten Produced via Laser Powder Bed Fusion (LPBF)

A. C. Field, L. N. Carter, N. J. E. Adkins, M. M. Attallah, M. J. Gorley, M. Strangwood

Abstract

Abstract Two high-purity tungsten powders, producedviadifferent manufacturing techniques, were characterized to determine size distribution, morphology, thermal properties, and flow characteristics and, thus, the likely suitability for Laser Powder Bed Fusion (LPBF) production. Specimens from duplicate builds were produced with the two powders and characterized for density, defect mechanisms, and thermal penetration into the substrate plate to compare apparent power densities. The first powder was a chemically reduced powder with irregular morphology and the second, a plasma spheroidized powder with highly spherical morphology. The latter was found to have tighter morphological control and size distribution, having a third of particles at the modal particle size in comparison to a fifth of the chemically reduced powder. This led to better flow characteristics, and an increase of 1.5 g cm−3(1500 kg m−3) in the packing densities seen in the powder bed which corresponds to 57 pct theoretical densityvs50 pct theoretical density in the chemically reduced powder. As a result, the specimens produced from the plasma spheroidized powder had higher densities (97.3vs88.5 pct) and the dominant defect mechanism moved from lack of fusion dominated in the chemically reduced powder to cracking dominated in the plasma spheroidized. The plasma spheroidized powder also showed higher apparent power densities (effective absorptivities) as evidenced by an 80 pct deeper penetration of the laser into the substrate plate.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Advanced materials and composites · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. PLANSEE, Tungsten, http://www.plansee.com/en/materials/tungsten.html; Accessed 1/11/19.
2. N.P. Taylor and R. Pampin: Fusion Engineering and Design, 2006, vol. 81(8), pp. 1333-1338.10.1016/j.fusengdes.2005.05.010 ↗
3. E.M. Savitskii and G.S. Burkhanov: Physical Metallurgy of Refractory Metals and Alloys, Consultants Bureau, New York, NY, 1970.
4. H. He, Y. Zeng and N. Qu: Precision Engineering, 2016, vol. 45, pp. 285-291.10.1016/j.precisioneng.2016.03.005 ↗
5. C.W. Corti: Platinum Metals Review, 1986, vol. 30(4), pp. 184-195.10.1595/003214086X304184195 ↗
6. R.D. Li, J.H. Liu, Y.S. Shi, L. Zhang and M.Z. Du: Powder Metallurgy, 2010, vol. 53(4), pp. 310-17.10.1179/174329009X442726 ↗
7. R.D. Li, Y.S. Shi, J.H. Liu, Z. Xie and Z.G. Wang: The International Journal of Advanced Manufacturing Technology, 2010, vol. 48(5), pp. 597-605.10.1007/s00170-009-2304-4 ↗
8. D. Faidel, D. Jonas, G. Natour and W Behr: Additive Manufacturing, 2015, vol. 8, pp. 88-94.10.1016/j.addma.2015.09.002 ↗
9. D. Zhang, Q. Cai, and J. Liu: Materials and Manufacturing Processes, 2012, vol. 27(12), pp. 1267-1270.10.1080/10426914.2012.663119 ↗
10. D. Wang, C. Yu, X. Zhou, J. Ma, W. Liu and Z.J. Shen: Applied Sciences, 2017, vol. 7(4), pp. 430-442.10.3390/app7040430 ↗
11. A. Iveković, N. Omidvari, B. Vrancken, K. Lietaert, L. Thijs, K. Vanmeensel, J. Vleugels and J.-P. Kruth: International Journal of Refractory Metals and Hard Materials, 2018, vol. 72, pp. 27-32.10.1016/j.ijrmhm.2017.12.005 ↗
12. A.B. Spierings, M. Schneider and R. Eggenberger: Rapid Prototyping Journal, 2011, vol. 17(5), pp. 380-386.10.1108/13552541111156504 ↗
13. M. Joyce, Nuclear Engineering: A Conceptual Introduction to Nuclear Power, 1st ed., Butterworth-Heinemann, Oxford, U.K., 2017.
14. D. Schulze, Flow Properties of Powders and Bulk Solids. (2006), http://www.dietmar-schulze.com/grdle1.pdf; Accessed 1/11/19.
15. F.A.L. Dullien, Porous Media, ed. H. Brenner, 2nd ed., Academic Press, Massachusetts, U.S.A., 1991.
16. R.L. Carr: Chemical Engineering Journal, 1965, vol. 72, pp. 163-168.
17. Y. Lee and W. Zhang: 26th Solid Freeform Fabrication, University of Texas, Austin, TX, 1999, pp. 1154-65.
18. J.H. Tan, W.L.E. Wong, and K.W. Dalgarno: Additive Manufacturing, 2017, vol. 18, pp. 228-255.10.1016/j.addma.2017.10.011 ↗
19. N.P. Karapatis, G. Egger, P.-E. Gygax and R. Glardon: 26th Solid Freeform Fabrication Symposium, University Texas, Austin, TX, 1999, pp. 255-263.
20. J. Trapp, A.M. Rubenchik, G. Guss, M.J. Matthews (2017) Appl. Mater. Today9(Supplement C), 341–349.10.1016/j.apmt.2017.08.006 ↗
21. C.D. Boley, S.C. Mitchell, A.M. Rubenchik and S.S.Q. Wu: Applied Optics, 2016, vol. 55(23), pp. 6496-6500.10.1364/AO.55.006496 ↗
22. A.V. Gusarov and E.P. Kovalev: Phys. Rev. B 2009, vol. 80(2), pp. 024202-1–024202-1510.1103/PhysRevB.80.024202 ↗
23. Oxygen, Nitrogen, and Hydrogen in Refractory Metals, Leco Corporation, http://www.leco.co.za/wp-content/iuploads/2012/12/ONH836_O-N-H_REFRACTORY_METALS_203-821-427.pdf; Accessed 1/11/19
24. Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering, ASTM International, West Conshohocken, PA., 2015.
25. Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester, ASTM International, West Conshohocken, PA., 2016.
26. Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel, ASTM International, West Conshohocken, PA., 2013.
27. Standard Test Method for Determination of Tap Density of Metal Powders and Compounds, ASTM International, West Conshohocken, PA., 2015.
28. Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, ASTM International, West Conshohocken, PA., 2015.
29. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak and A. Cardona: Nature Methods, 2012, vol. 9, pp. 676-682.10.1038/nmeth.2019 ↗
30. E. Lassner and W.D. Schubert: Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds, Plenum Publishers, New York, NY, 1999, pp. 1-59.10.1007/978-1-4615-4907-9 ↗
31. S.W.H. Yih and C.T. Wang: Tungsten: Sources, Metallurgy, Properties, and Applications, Plenum Press, New York, NY, 1979, p. 256.10.1007/978-1-4899-5025-3 ↗
32. A. Thompson and B.N. Taylor: Guide for the use of the International System of Units (SI). 2010, Maryland, U.S.A., http://www.nist.gov/physlab/pubs/sp811/index.cfm. Accessed 1/11/19.
33. D. Bergström, The Absorption of Laser Light by Rough Metal Surfaces, in Applied Physics and Mechanical Engineering (2008), PhD thesis, Luleå University of Technology, Österund, Sweden.
34. C.D. Boley, S.A. Khairallah, and A.M. Rubenchik: Applied Optics, 2015, vol. 54(9), pp. 2477-2482.10.1364/AO.54.002477 ↗
35. A.B. Badim, V.V. Valencia and D. Liu (eds), Additive Manufacturing Handbook, 2017, CRC Press, Boca Raton, FL, 2017, Chapters 7, 15 and 27.