journal article·2019-11

Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels

Hao Feng, Hua-Bing Li, Wei-Chao Jiao, Zhou-Hua Jiang, Ming-Hui Cai, Hong-Chun Zhu, Zhi-Gang Chen

Publisher page

Abstract

We elucidated the significance of partial substitution of C by N in three high nitrogen Fe-15Cr-1Mo-C-N martensitic stainless steels (MSSs), and particularly its influence on microstructural features and the strength-toughness balance. The results show that partial substitution of C by N avoided the formation of coarse intergranular carbides and caused significant changes in the type of carbonitrides from M23C6 to M23C6+M2N and finally to M2N. Meanwhile, partially replacing C by N first increased and then decreased the effective grain size, the fraction of retained austenite, and the plate martensite, while the variations of the amount of carbonitrides and dislocation density were just the opposite. The microstructural evolutions with varying (C+N) contents played a crucial role in determining the overall properties: the 0.35C-0.37N steel exhibited an improved impact toughness (similar to 86.1 J), which was 2 or 3 times higher than those of 0.50C-0.16N and 0.20C-0.54N steels, even at a strength level of over 2 GPa. The contributions of partial substitution of C by N on the strengthening mechanisms of MSSs were also systematically revealed by combining the experimental and theoretical data. (C) The Minerals, Metals & Materials Society and ASM International 2019
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. H.K.D.H. Bhadeshia: Progr. Mater. Sci., 2012, vol. 57, pp. 268–435.10.1016/j.pmatsci.2011.06.002 ↗
2. E. Franz-Josef: Chin. J. Aeronaut., 2007, vol. 20, pp. 378–84.10.1016/S1000-9361(07)60058-2 ↗
3. Z.H. Jiang, H. Feng, H.B. Li, H.C. Zhu, S.C. Zhang, B.B. Zhang, Y. Han, T. Zhang, and D.K. Xu: Materials, 2017, vol. 10, p. 861.10.3390/ma10080861 ↗
4. H. Leda: J. Mater. Process. Technol., 1995, vol. 53, pp. 263–72.10.1016/0924-0136(95)01984-M ↗
5. J.B. Wang, Y.F. Zhou, X.L. Xing, S. Liu, C.C. Zhao, Y.L. Yang, and Q.X. Yang: Surf. Coat. Technol., 2016, vol. 294, pp. 115–21.10.1016/j.surfcoat.2016.03.076 ↗
6. R. Fan, M. Gao, Y. Ma, X. Zha, X. Hao, and K. Liu: J. Mater. Sci. Technol., 2012, vol. 28, pp. 1059–66.10.1016/S1005-0302(12)60173-X ↗
7. M.B. Horovitz, F.B. Neto, A. Garbogini, and A.P. Tschiptschin: ISIJ Int., 1996, vol. 36, pp. 840–45.10.2355/isijinternational.36.840 ↗
8. V.G. Gavriljuk and H. Berns: High Nitrogen Steels: Structure, Properties, Manufacture, Applications, Springer-Verlag, Berlin, 1999, pp. 169–73.10.1007/978-3-662-03760-7 ↗
9. X. Qi, H. Mao, and Y. Yang: Corros. Sci., 2017, vol. 120, pp. 90–98.10.1016/j.corsci.2017.02.027 ↗
10. H. Feng, Z.H. Jiang, H.B. Li, P.C. Lu, S.C. Zhang, H.C. Zhu, B.B. Zhang, T. Zhang, D.K. Xu, and Z.G. Chen: Corros. Sci., 2018, vol. 144, pp. 288–300.10.1016/j.corsci.2018.09.002 ↗
11. S.C. Krishna, N.K. Karthick, A.K. Jha, B. Pant, and P.V. Venkitakrishnan: Metallogr. Microstruct. Anal., 2017, vol. 6, pp. 425–32.10.1007/s13632-017-0381-6 ↗
12. G. Stein and J. Menzel: Int. J. Mater. Prod. Technol., 1995, vol. 10, pp. 478–88.
13. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Mater. Sci. Eng. A, 2008, vols. 481–482, pp. 707–12.10.1016/j.msea.2006.11.186 ↗
14. V.G. Gavriljuk and H. Berns: Mater. Sci. Forum, 1999, vol. 318, pp. 71–80.10.4028/www.scientific.net/MSF.318-320.71 ↗
15. H. Berns, V. Gavriljuk, and B. Shanina: Adv. Eng. Mater., 2008, vol. 10, pp. 1083–93.10.1002/adem.200800214 ↗
16. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2000, vol. 48, pp. 3879–93.10.1016/S1359-6454(00)00192-0 ↗
17. A.A. Ono, N. Alonso, and A.P. Tschiptschin: ISIJ Int., 1996, vol. 36, pp. 813–17.10.2355/isijinternational.36.813 ↗
18. H. Berns and R. Ehrhardt: Steel Res. Int., 1996, vol. 67, pp. 343–49.10.1002/srin.199605499 ↗
19. Y. Song, J. Cui, and L. Rong: J. Mater. Sci. Technol., 2016, vol. 32, pp. 189–93.10.1016/j.jmst.2015.10.004 ↗
20. B. Kim, E. Boucard, T. Sourmail, D.S. Martín, N. Gey, and P.E.J. Rivera-Díaz-Del-Castillo: Acta Mater., 2014, vol. 68, pp. 169–78.10.1016/j.actamat.2014.01.039 ↗
21. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
22. F. Christien, M.T.F. Telling, and K.S. Knight: Scripta Mater., 2013, vol. 68, pp. 506–09.10.1016/j.scriptamat.2012.11.031 ↗
23. S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda, and S. Ogata: ISIJ Int., 2010, vol. 50, pp. 875–82.10.2355/isijinternational.50.875 ↗
24. L. Ming, Q. Wang, H. Wang, C. Zhang, Z. Wei, and A. Guo: Mater. Sci. Eng. A, 2014, vol. 613, pp. 240–49.10.1016/j.msea.2014.06.040 ↗
25. L. Xu, L. Chen, and W. Sun: Vacuum, 2018, vol. 154, pp. 322–32.10.1016/j.vacuum.2018.05.029 ↗
26. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
27. H. Beladi, G.S. Rohrer, A.D. Rollett, V. Tari, and P.D. Hodgson: Acta Mater., 2014, vol. 63, pp. 86–98.10.1016/j.actamat.2013.10.010 ↗
28. H. Kong, Q. Chao, M.H. Cai, E.J. Pavlina, B. Rolfe, P.D. Hodgson, and H. Beladi: Mater. Sci. Eng. A, 2017, vol. 707, pp. 538–47.10.1016/j.msea.2017.09.038 ↗
29. F. Hajyakbary, J. Sietsma, A.J. Böttger, and M.J. Santofimia: Mater. Sci. Eng. A, 2015, vol. 639, pp. 208–18.10.1016/j.msea.2015.05.003 ↗
30. J. Liu, H. Yu, T. Zhou, C. Song, and K. Zhang: Mater. Sci. Eng. A, 2014, vol. 619, pp. 212–20.10.1016/j.msea.2014.09.063 ↗
31. A. Toro, W.Z. Misiolek, and A.P. Tschiptschin: Acta Mater., 2003, vol. 51, pp. 3363–74.10.1016/S1359-6454(03)00107-1 ↗
32. M. Cai, H. Huang, J. Su, H. Ding, and P.D. Hodgson: J. Mater. Sci. Technol., 2018, vol. 34, pp. 1428–35.10.1016/j.jmst.2017.12.008 ↗
33. E.V. Zaretsky: “Bearing and Gear Steels for Aerospace Applications,” NASA Technical Memorandum TM-102529, NASA, Washington, DC, 1990, pp. 13–14.
34. C. Pandey, N. Saini, M.M. Mahapatra, and P. Kumar: Eng. Fail. Anal., 2017, vol. 71, pp. 131–47.10.1016/j.engfailanal.2016.06.012 ↗
35. S.C. Li, G.M. Zhu, and Y.L. Kang: J. Alloys Compds., 2016, vol. 675, pp. 104–15.10.1016/j.jallcom.2016.03.100 ↗
36. H.F. Xu, F. Yu, C. Wang, W.L. Zhang, J. Li, and W.Q. Cao: J. Iron Steel Res. Int., 2017, vol. 24, pp. 206–13.10.1016/S1006-706X(17)30029-8 ↗
37. X.P. Ma, L.J. Wang, B. Qin, C.M. Liu, and S.V. Subramanian: Mater. Des., 2012, vol. 34, pp. 74–81.10.1016/j.matdes.2011.07.064 ↗
38. C.Y. Kun and J.J. Rayment: Metall. Trans. A, 1982, vol. 13A, pp. 328–31.
39. M. Seifert, S. Siebert, S. Huth, W. Theisen, and H. Berns: Steel Res. Int., 2015, vol. 86, pp. 1508–16.10.1002/srin.201400503 ↗
40. L.F. Lv, L.M. Fu, S. Ahmad, and A. Shan: Mater. Sci. Eng. A, 2017, vol. 704, pp. 469–79.10.1016/j.msea.2017.07.089 ↗
41. Y.J. Wang, J.J. Sun, T. Jiang, Y. Sun, S.W. Guo, and Y.N. Liu: Acta Mater., 2018, vol. 158, pp. 247–56.10.1016/j.actamat.2018.07.060 ↗
42. J. Chen, W.N. Zhang, Z.Y. Liu, and G.D. Wang: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5849–59.10.1007/s11661-017-4362-9 ↗
43. H.J. Pan, H. Ding, and M.H. Cai: Mater. Sci. Eng. A, 2018, vol. 736, pp. 375–82.10.1016/j.msea.2018.08.055 ↗
44. C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 209–14.10.1179/mst.1994.10.3.209 ↗
45. H.Y. Li, X.W. Lu, W.J. Li, and X.J. Jin: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1284–1300.10.1007/s11661-010-0184-8 ↗
46. N.H.V. Dijk, A.M. Butt, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S.V.D. Zwaag: Acta Mater., 2005, vol. 53, pp. 5439–47.10.1016/j.actamat.2005.08.017 ↗
47. Q. Li: Mater. Sci. Eng. A, 2003, vol. 361, pp. 385–91.10.1016/S0921-5093(03)00565-3 ↗
48. T. Gladman: Mater. Sci. Technol., 1999, vol. 15, pp. 30–36.10.1179/026708399773002782 ↗
49. S.C. Kennett, G. Krauss, and K.O. Findley: Scripta Mater., 2015, vol. 107, pp. 123–26.10.1016/j.scriptamat.2015.05.036 ↗
50. C.N. Sastry, K.H. Khan, and W.E. Wood: Metall. Trans A, 1982, vol. 13A, pp. 676–80.10.1007/BF02644435 ↗
51. Z.X. Xia, C. Zhang, H. Lan, Z.G. Yang, P.H. Wang, J.M. Chen, Z.Y. Xu, X.W. Li, and S. Liu: Mater. Sci. Eng. A, 2010, vol. 528, pp. 657–62.10.1016/j.msea.2010.09.088 ↗
52. Z. Yang, Z. Liu, X. He, S. Qiao, and C. Xie: Sci. Rep., 2018, vol. 8, p. 207.10.1038/s41598-017-18434-3 ↗
53. M. Ou, Y. Ma, X. Hao, B. Wan, T. Liang, and K. Liu: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1300–07.10.1016/j.jmst.2016.06.026 ↗