Advancement in the Pressureless Sintering of CP Titanium Using High-Frequency Induction Heating
Source abstract
Abstract
Abstract High-frequency induction heating is applied as an alternative heating source for pressureless sintering of commercially pure Ti powders, aiming to intensify the sintering process. The effects of the process parameters on the properties of the sintered material are systematically studied. The initial powder compact density is the most influential parameter permitting sintered structures with highly porous to almost fully dense appearance. Short heating time combined with sintering to temperatures just above the β-transus resulted in a strong diffusion bonding between the Ti powder particles, and grain growth is observed at the former boundaries of the neighboring powder particles. The dimpled appearance of the fracture surface at those regions confirmed the strong metallic interparticle bonding. Tensile properties comparable to those of Ti-Grade 3 and Ti-Grade 4 are achieved, which also demonstrates the efficiency of the induction sintering process. A mechanism explaining the fast and efficient sintering is proposed. The process has the added advantage of minimizing the oxygen pickup.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Froes, F.H., Mashl, S.J., Moxson, V.S., Hebeisen, J.C., and Duz, V.A., JOM, 2004. 56(11): pp. 46-8.10.1007/s11837-004-0252-x ↗
2. Upadhyaya, G.S., Powder Metallurgy Technology and Equipment Selected Topics, in Materials Science Foundations, Upadhyaya, G.S., Editor. 2012, Trans Tech Publishers, Zurich. pp. 91–96.
3. Suárez, M., Fernández, A., Menéndez, G.L., Torrecillas, R., Kessel, H.U., Hennicke, J., Kirchner, R., and Kessel, T. Challenges and Opportunities for Spark Plasma Sintering: A Key Technology for a new genorations of materials. 2013. http://www.fct-systeme.de/download/20140619125935/2013-InTech-Challenges.pdf.
4. Karayannis, V.G. Microwave sintering of ceramic materials. in 20th Innovative Manufacturing Engineering and Energy Conference (IManEE 2016), 23-25 Sept. 2016. 2016. IOP Publishing, Bristol.
5. Thostenson, E.T. and Chou, T.W., Composites Part A: Applied Science and Manufacturing, 1999. 30: pp. 1055-71.10.1016/S1359-835X(99)00020-2 ↗
6. Buchelnikov, V.D., Louzguine-Luzgin, D.V., Xie, G., Li, S., Yoshikawa, N., Sato, M., Anzulevich, A.P., Bychkov, I.V., and Inoue, A., Journal of Applied Physics, 2008. 104(1135051): pp. 1-10.
7. German, R.M., Rapid Heating Approaches, in Sintering: from empirical observations to scientific principles. Elsevier/Butterworth-Heinemann, Amsterdam, 2014, pp. 405–11.10.1016/B978-0-12-401682-8.00012-4 ↗
8. Hermel, W., Leitner, G., and Krumphold, R., Powder Metallurgy, 1980. 23(3): pp. 130-135.10.1179/pom.1980.23.3.130 ↗
9. Conta, R.L., IEEE Trans. Ind. Appl., 1977. IA-13(4), pp. 330–34.10.1109/TIA.1977.4503415 ↗
10. Plehanov, B.G., Porochkovaia Metallurgia 1992. 12: pp. 96-9.
11. Krumphold, R., Hermel, W., and Leitner, G., Sintered Metal-Ceramic Composites. Proceedings of the Third International School on Sintered Materials, 6-9 Dec. 1983, 1984, pp. 127–38.
12. Civi, C. and Atik, E., Journal of Alloys and Compounds, 2018. 753: pp. 517-24.10.1016/j.jallcom.2018.04.241 ↗
13. Cavdar, U. and Atik, E., Modern Applied Science, 2010. 4(3): pp. 63-70.10.5539/mas.v4n3p63 ↗
14. Shon, I.-J., Kim, B.-R., Doh, J.-M., and Yoon, J.-K., Ceramics International, 2010. 36(6): pp. 1797-803.10.1016/j.ceramint.2010.03.007 ↗
15. In-Jin, S., Hee-Ji, W., Sung-Wook, C., and Wonbaek, K., Materials Transactions, 2011. 52(9): pp. 1832-5.10.2320/matertrans.M2011167 ↗
16. Baig, M., Ammar, H.R., and Seikh, A.H., Materials Science and Engineering A, 2016. 655: pp. 132-41.10.1016/j.msea.2015.12.077 ↗
17. Bolzoni, L., Ruiz-Navas, E.M., Neubauer, E., and Gordo, E., Materials Chemistry and Physics, 2012. 131(3): pp. 672-9.10.1016/j.matchemphys.2011.10.034 ↗
18. Raynova, S., Zhang, D.L., and Gabbitas, B., Key Engineering Materials, 2012. 520: pp. 289-94.10.4028/www.scientific.net/KEM.520.289 ↗
19. Zhang, D.L., Raynova, S., Nadakuduru, V., Peng, C., Gabbitas, B., and Robinson, B., Materials Science Forum, 2009. 618-619: pp. 513-16.10.4028/www.scientific.net/MSF.618-619.513 ↗
20. Raynova, S., Study on Low-cost Alternatives for Synthesising Powder Metallurgy Titanium and Titanium Alloys, PhD thesis, in Engineering, Gabbitas, B., Bolzoni, L., and Yang, F., Editors. 2017, University of Waikato.
21. Raynova, S., Zhang, D.L., Polo, D., Gonthier, L., Egea, W., and Nadakuduru, V.N., Advanced Materials Research, 2011. 275: pp. 196-9.10.4028/www.scientific.net/AMR.275.196 ↗
22. Bulatova, L.S., Soviet Powder Metallurgy and Metal Ceramics, 1988. 27(7): pp. 547-50.10.1007/BF00799988 ↗
23. Conta, R., Process for heating and sintering ferrous powder metal compacts with radio frequency magnetic field. 1975: USA.
24. Robertson, I.M. and Schaffer, G.B., Powder Metallurgy, 2010. 53(2): pp. 146-162.10.1179/174329009X434293 ↗
25. Qian, M., International Journal of Powder Metallurgy, 2010. 46(5): pp. 29-44.
26. German RM (1996) Solid-state sintering fundamentals, in Sintering Theory and Practice. Wiley, New York, pp. 95-96.
27. Murray, L.S., Ti phase diagrams, in ASM Metal Handbook, Vol. 3. 1992. pp. 1741–70.
28. Luo, S.D., Yan, M., Schaffer, G.B., and Qian, M., Metallurgical and Materials Transactions, 2011. 42(8): pp. 2466-2474.10.1007/s11661-011-0645-8 ↗
29. Luo, S.D., Yang, Y.F., Schaffer, G.B., and Qian, M., Journal of Materials Processing Technology, 2014. 214(3): pp. 660-666.10.1016/j.jmatprotec.2013.10.010 ↗
30. Lou, J., Effects of powder conditioning on the quality, microstructure and mechanical properties of sintered titanium alloys (Chapter 6). in Engineering. 2015. http://researchcommons.waikato.ac.nz/. pp. 128–60.
31. ASTM, ASTM B988- 13 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components.
32. Bolzoni, L., Ruiz-Navas, E.M., and Gordo, E., Materials & Design, 2014. 60: pp. 226-32.10.1016/j.matdes.2014.04.005 ↗