Influence of Ni Interlayer on Microstructure and Mechanical Properties of Mg/Al Bimetallic Castings
Source abstract
Abstract
Dissimilar joining of magnesium and aluminum using a compound casting process was investigated in the present work. For the first time, a Ni interlayer prepared by plasma spraying was inserted between the two base metals to improve the interfacial characteristics. Examination of the interfacial regions using scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron probe microanalysis, and X-ray diffraction revealed the formation of a three-layered interface between Mg and Al without the interlayer. The thickness of the interface was approximately 600 μm when the casting was performed at 700 °C and increased with increasing casting temperature. However, with the addition of the Ni interlayer, the Al-Mg reaction was successfully prevented, and metallurgical bonding between the Ni interlayer and two base metals was achieved at a casting temperature of 700 °C. Upon increasing this temperature, Mg-Ni and Al-Ni intermetallics were generated at the separate interfaces. The shear strength of the Mg/Al bimetallic castings with the Ni interlayer was substantially improved compared with that of the direct Mg/Al joint, with a maximum value of 25.4 MPa achieved at 700 °C. Fracture occurred mainly along the Mg/Ni interface for the Mg/Ni/Al multilayer structure castings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M. Sun, S.T. Niknejad, H. Gao, L. Wu and Y. Zhou: Mater. Des., 2016, vol. 91, pp. 331–9.10.1016/j.matdes.2015.11.121 ↗
2. S. Brennan, K. Bermudez, N.S. Kulkarni and Y. Sohn: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4043–52.10.1007/s11661-012-1248-8 ↗
3. L. Xiao and N. Wang: J. Nucl. Mater., 2015, vol. 456, pp. 389–97.10.1016/j.jnucmat.2014.09.022 ↗
4. S.K. das, Y. Kim, T.K. Ha, R. Gauvin and I. Jung: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2539–47.10.1007/s11661-013-1636-8 ↗
5. M. Jafarian, M.S. Rizi, M. Jafarian, M. Honarmand, H.R. Javadinejad, A. Ghaheri, M.T. Bahramipour and M. Ebrahimian: Mater. Sci. Eng. A, 2016, vol. 666, pp. 372–6.10.1016/j.msea.2016.04.011 ↗
6. W. Liu, L. Long, Y. Ma and L. Wu: J. Alloy. Compd., 2012, vol. 643, pp. 34–9.10.1016/j.jallcom.2015.04.116 ↗
7. H. Shi, K. Chen, Z. Liang, F. Dong, T. Yu, X. Dong, L. Zhang and A. Shan: J. Mater. Sci. Technol., 2017, vol. 33, pp. 359–366.10.1016/j.jmst.2016.05.006 ↗
8. Y. Zhao, Z. Ding, C. Shen and Y. Chen: Mater. Des., 2016, vol. 94, pp. 240–252.10.1016/j.matdes.2016.01.047 ↗
9. A. Dorbane, B. Mansoor, G. Ayoub, V.C. Shunmugasamy and A. Imad: Mater. Sci. Eng. A, 2016, vol. 651, pp. 720–33.10.1016/j.msea.2015.11.019 ↗
10. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3238–51.10.1007/s11661-010-0366-4 ↗
11. B. Fu, G. Qin, F. Li, X. Meng, J. Zhang and C. Wu: J. Mater. Process. Technol., 2015, vol. 218, pp. 38–47.10.1016/j.jmatprotec.2014.11.039 ↗
12. K.S. Lee, Y.S. Lee and Y.N. Kwon: Mater. Sci. Eng. A, 2014, vol. 606, pp. 205–13.10.1016/j.msea.2014.03.082 ↗
13. A. Macwan, X.Q. Jiang, C. Li and D.L. Chen: Mater. Sci. Eng. A, 2013, vol. 587, pp. 344–51.10.1016/j.msea.2013.09.002 ↗
14. X.P. Zhang, S. Castagne, T.H. Yang, C.F. Gu, J.T. Wang: Mater. Des., 2011, vol. 32, pp. 1152–8.10.1016/j.matdes.2010.10.030 ↗
15. Y. Mahmoodkhani and M.A. Wells: J. Mater. Process. Technol., 2016, vol. 232, pp. 175–83.10.1016/j.jmatprotec.2016.01.034 ↗
16. Y. Xin, R. Hong, B. Feng, H. Yu, Y. Wu and Q.Liu: Mater. Sci. Eng. A, 2015, vol. 640, pp. 210–6.10.1016/j.msea.2015.06.008 ↗
17. E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, T. Homma and S. Kamado: J. Mater. Sci., 2011, vol. 46, pp. 6491–9.10.1007/s10853-011-5595-4 ↗
18. W. Jiang, G. Li, Z. Fan, L. Wang and F. Liu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2462–70.10.1007/s11661-016-3395-9 ↗
19. W. Jiang, Z. Fan, G. Li, L. Yang and X. Liu: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 6478–97.
20. J. Park, H. Song, J. Kim, S.S. Sohn and S. Lee: Metall. Mater. Trans. A, 2016, vol. 48A, pp. 57–62.
21. J.C. Liu, J.Hua, X.Y. Nie, H.X. Li, Q. Dub, J.S. Zhang, L.Z. Zhuang: Mater. Sci. Eng. A, 2015, vol. 635, pp. 70–6.10.1016/j.msea.2015.03.074 ↗
22. L.M. Liu, L.M. Zhao and Z.H. Wu: Mater. Sci. Technol., 2011, vol. 27, pp. 1372–6.10.1179/026708310X12699498462887 ↗
23. X. Dai, H. Zhang, H. Zhang, J. Liu and J. Feng: Mater. Lett., 2016, vol. 178, pp. 235–8.10.1016/j.matlet.2016.04.064 ↗
24. L. Zhao and Z. Zhang: Scr. Mater., 2008, vol. 58, pp. 283–6.10.1016/j.scriptamat.2007.10.006 ↗
25. M. Gao, S. Mei, X. Li and X. Zeng: Scr. Mater., 2012, vol. 67, pp. 193–6.10.1016/j.scriptamat.2012.04.015 ↗
26. Y. Wang, G. Luo, J. Zhang, Q. Shen and L. Zhang: Mater. Sci. Eng. A, 2013, vol. 559, pp. 868–74.10.1016/j.msea.2012.09.035 ↗
27. L. Liu, X. Liu and S. Liu: Scr. Mater., 2006, vol. 55, pp. 383–6.10.1016/j.scriptamat.2006.04.025 ↗
28. J. Zhang, G. Luo, Y. Wang, Q. Shen and L. Zhang: Mater. Lett., 2012, vol. 83, pp. 189–91.10.1016/j.matlet.2012.06.014 ↗
29. M. Sun, S.T. Niknejad, G.Zhang, M.K. Lee, L.Wu and Y. Zhou: Mater. Des., 2015, vol. 87, pp. 905–13.10.1016/j.matdes.2015.08.097 ↗
30. P. Penner, L. Liu, A. Gerlich and Y. Zhou: Sci. Technol. Weld. Joi., 2013, vol. 18, pp. 541–50.10.1179/1362171813Y.0000000129 ↗
31. X. Qi and L. Liu: Mater. Des., 2012, vol. 33, pp. 436–43.10.1016/j.matdes.2011.04.046 ↗
32. G. Xu, A.A. Luo, Y. Chen, A.K. Sachdev: Mater. Sci. Eng. A, 2014, vol. 595, pp. 154–8.10.1016/j.msea.2013.11.093 ↗
33. B. Gill and R. Tucker. Mater. Sci. Technol., 1986, vol. 2, pp. 207–13.10.1179/mst.1986.2.3.207 ↗
34. A. Vencl, M. Mrdak and M. Banjac: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 398–405.10.1007/s11661-008-9693-0 ↗
35. H. Okamoto: J. Phase Equilib., 1998, vol. 19, pp. 598.10.1361/105497198770341815 ↗
36. S.M. Emami, M. Divandari, H. Arabi, and E. Hajjari: JMEPEG, 2013, vol. 22, pp. 123–30.10.1007/s11665-012-0243-y ↗
37. Y. Liu, Y. Chen and C. Yang: AIP ADV., 2015, vol. 5, pp. 087147-1–13.
38. Ansara, N. Dupin, H.L. Lukas and B. Sundman: J. Alloy. Compd., 1997, vol. 247, pp. 20–30.10.1016/S0925-8388(96)02652-7 ↗
39. M. Mezbahul-Islam and M. Medraj: CALPHAD, 2009, vol. 33, pp. 478–86.10.1016/j.calphad.2009.01.001 ↗
40. S.M. Emami, M. Divandari, E. Hajjari and H. Arabi: Int. J. Cast Metal. Res., 2013, vol. 26, pp. 43–50.10.1179/1743133612Y.0000000037 ↗
41. K. He, J. Zhao, P. Li, J. He and Q. Tang: Mater. Des., 2016, vol. 112, pp. 553–64.10.1016/j.matdes.2016.09.085 ↗
42. J. Jie, J. Zhao, H. Chen, Y. Fu, Z. Cao and T. Li: Int. J. Mater. Res., 2014, vol. 105, pp. 462–8.10.3139/146.111046 ↗