journal article·2018-05Open access

A Three-Stage Mechanistic Model for Solidification Cracking During Welding of Steel

L. Aucott, D. Huang, H. B. Dong, S. W. Wen, J. Marsden, A. Rack, A. C. F. Cocks

Abstract

A three-stage mechanistic model for solidification cracking during TIG welding of steel is proposed from in situ synchrotron X-ray imaging of solidification cracking and subsequent analysis of fracture surfaces. Stage 1—Nucleation of inter-granular hot cracks: cracks nucleate inter-granularly in sub-surface where maximum volumetric strain is localized and volume fraction of liquid is less than 0.1; the crack nuclei occur at solute-enriched liquid pockets which remain trapped in increasingly impermeable semi-solid skeleton. Stage 2—Coalescence of cracks via inter-granular fracture: as the applied strain increases, cracks coalesce through inter-granular fracture; the coalescence path is preferential to the direction of the heat source and propagates through the grain boundaries to solidifying dendrites. Stage 3—Propagation through inter-dendritic hot tearing: inter-dendritic hot tearing occurs along the boundaries between solidifying columnar dendrites with higher liquid fraction. It is recommended that future solidification cracking criterion shall be based on the application of multiphase mechanics and fracture mechanics to the failure of semi-solid materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. G.K. Sigworth, AFS Trans., 1996, 104, pp 1053-1062.
2. D.G. Eskin, Suyitno, L. Katgerman, Prog. Mater. Sci., 2004, 49(5), pp 629-711.10.1016/S0079-6425(03)00037-9 ↗
3. W.S. Pellini, Foundry, 1952, 80, pp 125-133.
4. W.I. Humphrey, J. Inst. Metals, 1948, 75, pp 235.
5. J.C. Borland, Br. Weld. J., 1960, 7, pp 508-512.
6. U. Feurer, Giessereiforschung, 1976, 28(2), pp 75-80.
7. Y.F. Guven, J.D. Hunt, Cast Met., 1988, 1(2), pp 104-111.10.1080/09534962.1988.11818955 ↗
8. M. Rappaz, J.M. Drezet, M. Gremaud, Metal. Mater. Trans. A, 1999, 30(2), pp 449-455.10.1007/s11661-999-0334-z ↗
9. J. Campbell, Castings, Butterworth-Heinemann, Oxford, United Kingdom, 2003.
10. S. Kou, Acta Mater., 2015, 88, pp 366-374.10.1016/j.actamat.2015.01.034 ↗
11. I. Farup, J.M. Drezet, M. Rappaz, Acta Mater., 2001, 49(7), pp 1261-1269.10.1016/S1359-6454(01)00013-1 ↗
12. P.D. Grasso, J.M. Drezet, and M. Rappaz, J. Metal. - electronic edition, 2002.
13. J. Aveson, IOP Conf. Series: Mater. Sci. Eng., 2012, p. 33.10.1088/1757-899X/33/1/012040 ↗
14. C. Davidson, D. Viano, L. Lu, D. St.John, Int. J. Cast Metal. Res., 2006, 19(1), pp 59-65.10.1179/136404606225023291 ↗
15. C. Puncreobutr, A.B. Phillion, J.L. Fife, P. Rockett, A.P. Horsfield, P.D. Lee, Acta Mater., 2014, 79(0), pp 292-303.10.1016/j.actamat.2014.07.018 ↗
16. C. Puncreobutr, A.B. Phillion, J.L. Fife, P.D. Lee, Acta Mater., 2014, 64(0), pp 316-325.10.1016/j.actamat.2013.10.044 ↗
17. C. Puncreobutr, P.D. Lee, K.M. Kareh, T. Connolley, J.L. Fife, A.B. Phillion, Acta Mater., 2014, 68(0), pp 42-51.10.1016/j.actamat.2014.01.007 ↗
18. M. Sistaninia, S. Terzi, A.B. Phillion, J.M. Drezet, M. Rappaz, Acta Mater., 2013, 61(10), pp 3831-3841.10.1016/j.actamat.2013.03.021 ↗
19. A.B. Phillion, R.W. Hamilton, D. Fuloria, A.C.L. Leung, P. Rockett, T. Connolley, P.D. Lee, Acta Mater., 2011, 59(4), pp 1436-1444.10.1016/j.actamat.2010.11.005 ↗
20. A.B. Phillion, P.D. Lee, E. Maire, S.L. Cockcroft, Metal. Mater. Trans. A, 2008, 39(10), pp 2459-2469.10.1007/s11661-008-9584-4 ↗
21. A.B. Phillion, S.L. Cockcroft, P.D. Lee, Mater. Sci. Eng. A, 2008, 491(1–2), pp 237-247.10.1016/j.msea.2008.01.078 ↗
22. A.B. Phillion, S.L. Cockcroft, P.D. Lee, Scripta Mater., 2006, 55(5), pp 489-492.10.1016/j.scriptamat.2006.03.035 ↗
23. W.M. Van Haaften, W.H. Kool, L. Katgerman, J. Mater. Eng. Perform., 2002, 11(5), pp 537-543.10.1361/105994902770343791 ↗
24. P.J.G. Harris, Alum. Alloy. 2002 - ICAA8 2002, pp. 179–84.10.1525/ae.2002.29.1.179 ↗
25. M. Sistaninia, A.B. Phillion, J.M. Drezet, M. Rappaz, Acta Mater., 2012, 60(19), pp 6793-6803.10.1016/j.actamat.2012.08.057 ↗
26. C.M. Gourlay, A.K. Dahle, T. Nagira, N. Nakatsuka, K. Nogita, K. Uesugi, H. Yasuda, Acta Mater., 2011, 59(12), pp 4933-4943.10.1016/j.actamat.2011.04.038 ↗
27. M. Rappaz, P.-D. Grasso, V. Mathier, J. Drezet, A. Jacot, TMS, Warrendale, PA, 2005, pp. 179-90.
28. K.M. Kareh, C. O’Sullivan, T. Nagira, H. Yasuda, C.M. Gourlay, Acta Mater., 2017, 125, pp 187-195.10.1016/j.actamat.2016.11.066 ↗
29. B. Cai, S. Karagadde, L. Yuan, T.J. Marrow, T. Connolley, P.D. Lee, Acta Mater., 2014, 76, pp 371-380.10.1016/j.actamat.2014.05.035 ↗
30. C.M. Gourlay, A. Dahle, Nat., 2007, 445(7123), pp 70-73.10.1038/nature05426 ↗
31. D.G. Eskin, L. Katgerman, Metal. Mater. Trans. A, 2007, 38(7), pp 1511-1519.10.1007/s11661-007-9169-7 ↗
32. M. Tong, G. Duggan, J. Liu, Y. Xie, M. Dodge, L. Aucott, H. Dong, J. Dantzig, O. Barrera, A.F. Cocks, H. Kitaguchi, S. Lozano-Perez, C. Kleijn, S. Wen, JOM, 2013, 65(1), pp 99-106.10.1007/s11837-012-0499-6 ↗
33. L. Aucott, S.W. Wen, A. Sullivan, H.B. Dong, 4th Int. Integr. High Temp. Weld. Conf., London, 2012.
34. L. Aucott: Mechanism of Solidification Cracking During Welding of High Strength Steels for Subsea Linepipe. PhD Thesis, Univeristy of Leicester, Department of Engineering, 2015.
35. L. Aucott, S.W. Wen, H. Dong, Mater. Sci. Eng: A, 2015, 622(0), pp 194-203.10.1016/j.msea.2014.10.057 ↗
36. L. Aucott, D. Huang, H.B. Dong, S.W. Wen, J.A. Marsden, A. Rack, A.C.F. Cocks, Sci. Rep., 2017, 7, 40255.10.1038/srep40255 ↗
37. P. Cloetens, J. Baruchel, J.-P. Guigay, M. Schlenker, J. phys. D: Appl. phys., 1996, 29(1), pp 133-146.10.1088/0022-3727/29/1/023 ↗
38. C.A. Schneider, W.S. Rasband, K.W. Eliceiri, Nat. Meth., 2012, 9(7), pp 671-675..10.1038/nmeth.2089 ↗
39. B. Santillana, R. Boom, D. Eskin, H. Mizukami, M. Hanao, M. Kawamoto, Metal. Mater. Trans. A, 2012, 43(13), pp 5048-5057.10.1007/s11661-012-1331-1 ↗
40. L.K. Bigelow, M.C. Flemings, Metal. Trans. B, 1975, 6(2), pp 275-283.10.1007/BF02913570 ↗
41. Suyitno, V.I. Savran, L. Katgerman, D.G. Eskin, Metall. Mat. Trans. A, 2004, 35(11), pp 3551-3561.
42. Y. Ju: Ph.D. Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2004.
43. D. Eskin, Suyitno, and L. Katgerman: Proc. 9th Australasian Conf., CSIRO Publishing, Collingwood, 2005, pp. 77–84.
44. S. Terzi, Scripta Mater., 2009, 61, pp 449-452.10.1016/j.scriptamat.2009.04.041 ↗