journal article·2018-01Open access

In Situ Investigation of the Evolution of Lattice Strain and Stresses in Austenite and Martensite During Quenching and Tempering of Steel

M. Villa, F. Niessen, M. A. J. Somers

Abstract

Energy dispersive synchrotron X-ray diffraction was applied to investigate in situ the evolution of lattice strains and stresses in austenite and martensite during quenching and tempering of a soft martensitic stainless steel. In one experiment, lattice strains in austenite and martensite were measured in situ in the direction perpendicular to the sample surface during an austenitization, quenching, and tempering cycle. In a second experiment, the sin2 ψ method was applied in situ during the austenite-to-martensite transformation to distinguish between macro- and phase-specific micro-stresses and to follow the evolution of these stresses during transformation. Martensite formation evokes compressive stress in austenite that is balanced by tensile stress in martensite. Tempering to 748 K (475 °C) leads to partial relaxation of these stresses. Additionally, data reveal that (elastic) lattice strain in austenite is not hydrostatic but hkl dependent, which is ascribed to plastic deformation of this phase during martensite formation and is considered responsible for anomalous behavior of the 200 γ reflection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. P.J. Withers, W.M. Stobbs, and O.B. Pedersen: Acta metall., 1989, vol. 37, pp. 3061–84.10.1016/0001-6160(89)90341-6 ↗
2. O.B. Pedersen: Acta Metall., 1983, vol. 31, pp. 1795–808.10.1016/0001-6160(83)90126-8 ↗
3. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 366–75.10.1179/026708301101510087 ↗
4. V. Hauk: Structural and Residual Stress Analysis by Non-destructive Methods: Evaluation–Application–Assessment, Elsevier Science, New York, 1997.
5. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
6. G.B. Olson and W.S. Owen: Martensite, ASM International, Materials Park, OH, 1992.
7. Z. Nishiyama: Martensitic Transformation, Academic, New York, 1978.
8. J.W. Christian: Proc. Int. Conf. Martensitic Transform., 1979, pp. 220–33.
9. H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2004, vol. 378, pp. 34–39.10.1016/j.msea.2003.10.328 ↗
10. G.E. Totten, M. Howes, and T. Inoue: Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park, OH, 2002.
11. V.I. Gridnev and V.I. Trefilov: Dokl. Akad. Nauk SSSR, 1957, vol. 116, pp. 60–62.
12. N. Ridley, H. Stuart, and L. Zwell: Trans. AIME, 1969, vol. 245, pp. 1834–36.
13. K. Ya Golovchiner: Fiz. Metal. Metalloved., 1974, vol. 37, pp. 363–68.
14. Y. Tanaka and K. Shimizu: Trans. JIM, 1980, vol. 21, pp. 42–50.10.2320/matertrans1960.21.42 ↗
15. L. Cheng, A. Bottger, T.H. de Keijser, and E.J. Mittemeijer: Scripta Mater., 1990, vol. 24, pp. 509–14.10.1016/0956-716X(90)90192-J ↗
16. M. Villa, F.B. Grumsen, K. Pantleon, and M.A.J. Somers: Scripta Mater., 2012, vol. 67, pp. 621–24.10.1016/j.scriptamat.2012.06.027 ↗
17. M. Villa, K. Pantleon, and M.A.J. Somers: J. Alloys Compd., 2013, vol. 577, pp. S543–48.10.1016/j.jallcom.2011.12.162 ↗
18. M. Villa, K. Pantleon, and M.A.J. Somers: Acta Mater., 2014, vol. 65, pp. 383–92.10.1016/j.actamat.2013.11.007 ↗
19. J. Epp: Adv. Mater. Res., 2014, vol. 996, pp. 525–31.10.4028/www.scientific.net/AMR.996.525 ↗
20. J. Epp: Proc. IFHTSE 2016, 2016, pp. 440–47.10.2175/193864716819714807 ↗
21. N. Nakada, Y. Ishibashi, T. Tsuchiyama, and S. Takaki: Acta Mater., 2016, vol. 110, pp. 95–112.10.1016/j.actamat.2016.03.048 ↗
22. V.M. Yeshov and M.L. Oslon: Fiz. Metal. Metalloved., 1968, vol. 25, pp. 874–81.
23. V.M. Yeshov and M.L. Oslon: Fiz. Metal. Metalloved., 1972, vol. 33, pp. 215–17.
24. E. Scheil and E. Saftig: Arch. Eisenhuttenw. 1957, vol. 28, pp. 49–51.
25. K. Ullakko and V.G. Gavriljuk: Acta Metall. Mater., 1992, vol. 40, pp. 2471–82.10.1016/0956-7151(92)90316-7 ↗
26. K. Ullakko: Aging of Iron-Based Martensites at Low-Temperatures. Ph.D. Thesis, Helsinki, 1992.
27. D. San Martin, E. Jimenez-Melero, J.A. Duffy, V. Honkimaki, S. van der Zwaag, and N.H. van Dijk: J. Appl. Crystallogr., 2012, vol. 45, pp. 748–57.10.1107/S0021889812024892 ↗
28. T. Kakeshita, T. Saburi, K. Kind, and S. Endo: Phase Transit., 1999, vol. 70, pp. 65–113.10.1080/01411599908240678 ↗
29. A.N. Ezeilo, G.A. Webster, P.J. Webster, and X. Wang: Physica B, 1992, vol. 180–181, pp. 1044–46.10.1016/0921-4526(92)90546-5 ↗
30. B. Clausen, T. Lorentzen, and T. Leffers: Acta. Mater., 1998, vol. 46, pp. 3087–98.10.1016/S1359-6454(98)00014-7 ↗
31. E.C. Oliver: The Generation of Internal Stresses in Single and Two Phase Materials. Ph.D. Thesis, Manchester, 2002.
32. B. Clausen, T. Leffers, and T. Lorentzen: Acta. Mater., 2003, vol. 51, pp. 6181–88.10.1016/j.actamat.2003.07.002 ↗
33. F. Niessen, M. Villa, D. Apel, O. Keßler, M. Reich, J. Hald, and M.A.J. Somers: Mater. Sci. Forum, 2016, vol. 879, pp. 1381–86.10.4028/www.scientific.net/MSF.879.1381 ↗
34. F. Niessen, M. Villa, J. Hald, and M.A.J. Somers: Mater. Des., 2017, vol. 116, pp. 8–15.10.1016/j.matdes.2016.11.076 ↗
35. Ch. Genzel, I.A. Denks, and M. Klaus: Mater. Sci. Forum, 2006, vol. 524–525, pp. 193–98.10.4028/www.scientific.net/MSF.524-525.193 ↗
36. B.C. Giessen and G.E. Gordon: Science, 1968, vol. 159, pp. 973–75.10.1126/science.159.3818.973-a ↗
37. Ch. Genzel, I.A. Denks, and M. Klaus: Modern Diffraction Methods, Wiley-VCH, Weinheim, 2013, pp. 127–54.10.1002/9783527649884.ch5 ↗
38. E.S.U. Laine: J. Phys. F, 1978, vol. 8, pp. 1343–48.10.1088/0305-4608/8/7/007 ↗
39. Y.S. Touloukian: Thermophysical Properties of Matter. The TPRC Data Series 12: Thermal Expansion Metallic Elements and Alloys, IFI/Plenum, New York, 1975.
40. K.-H. Hellwege and A.M. Hellwege, eds.: Landoldt-Börnstein, New Series, Group III, vol. 11, Springer, Berlin, 1979.
41. H. Behnken: Berechnung und Ermittlung der röntgenographischen Elastizitätskonstanten sowie der Mikro- und Makro-Spannungen heterogener und texturierter Werkstoffe. Ph.D. Thesis, RWTH Aachen, 1992.
42. A. Teklu, H. Ledbetter, S. Kim, L.A. Boatner, M. McGuire, and V. Keppens: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3149–54.10.1007/s11661-004-0059-y ↗
43. H.M. Ledbetter and M.W. Austin: Mater. Sci. Eng., 1985, vol. 70, pp. 143–49.10.1016/0025-5416(85)90275-7 ↗
44. E. Kröner: Z. Phys., 1958, vol. 151, pp. 504–18.10.1007/BF01337948 ↗
45. J.D. Eshelby: Proc. R. Soc. Lond. A, 1957, vol. 241, pp. 376–96.10.1098/rspa.1957.0133 ↗
46. T. Gnaupel-Herold and A. Creuziger: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3594–600.10.1016/j.msea.2011.01.030 ↗
47. A. Bojack, L. Zhao, P.F. Morris, and J. Sietsma: Mater. Charact., 2012, vol. 7, pp. 77–86.10.1016/j.matchar.2012.06.004 ↗
48. C.M. Wayman: Iron and Steel Institute—Special Report, 1965, pp. 153–63.
49. J. Pak, D.W. Suh, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4520–24.10.1007/s11661-012-1264-8 ↗
50. J.A. Klostermann and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 355–60.10.1016/0001-6160(64)90004-5 ↗
51. J.A. Klostermann: J. Less Common Met., 1972, vol. 28, pp. 75–94.10.1016/0022-5088(72)90170-1 ↗
52. G. Faria, J. Escobar, and A.J. Ramirez: Proc. Int. Conf. Solid–Solid Phase Transform. Inorg. Mater. 2015, 2015, pp. 637–38.
53. A. Beneteau, E. Aeby-Gautier, G. Geandier, P. Weisbecker, A. Redjaimia, and B. Appolaire: Acta Mater., 2014, vol. 81, pp. 30–40.10.1016/j.actamat.2014.07.050 ↗
54. A.J.C. Wilson: Acta Crystallogr., 1952, vol. 5, pp. 318–22.10.1107/S0365110X52000988 ↗
55. J.W.L. Pang, T.M. Holden, and T.E. Mason: J. Strain Anal. Eng. Des., 1998, vol. 33, pp. 373–83.10.1243/0309324981513075 ↗