journal article·2016-10

Characterization of M23C6 Carbides Precipitating at Grain Boundaries in 100Mn13 Steel

Zhenfeng Xu, Zhimin Ding, Linnan Dong, Bo Liang

Publisher page

Abstract

Characteristics of the formation, the interfacial structure, and the defects of M23C6 carbides in 100Mn13 steel after 1323 K (1050 °C) solution treatment and subsequent aging treatment were investigated by transmission electron microscope (TEM). The results show that M23C6 carbides precipitated on both sides of the grain boundaries. Each M23C6 carbide particle possesses a coherent interface and the cube–cube orientation relationship with the one austenite grain which M23C6 precipitated from. The orientation relationships between the M23C6 carbides and the austenite matrix were determined as follows: (1) [211]γ $$ \parallel $$ [211]M23C6, ( $$ 1\bar{1}\bar{1} $$ )γ $$ \parallel $$ ( $$ 1\bar{1}\bar{1} $$ )M23C6, (02 $$ \bar{2} $$ )γ $$ \parallel $$ (02 $$ \bar{2} $$ )M23C6, (2) [110]γ $$ \parallel $$ [110]M23C6, ( $$ \bar{1}1\bar{1} $$ )γ $$ \parallel $$ ( $$ \bar{1}1\bar{1} $$ )M23C6, ( $$ \bar{1} $$ 11)γ $$ \parallel $$ ( $$ \bar{1} $$ 11)M23C6. The M23C6 carbide also possesses an incoherent interface with the other austenite grain which the M23C6 carbide grew into by ledge mechanism. The precipitation of the M23C6 carbides along the boundaries can improve the hardness of the high-manganese steel to some extent. Besides, twinning and stacking faults were observed in M23C6 carbides. The reports about twinning and stacking faults in the M23C6 carbides have not been found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. ASM (1990) ASM Handbook Properties and Selection: Irons, Steels, and High performance Steels, 10th ed., vol. 1. ASM International, Materials Park.
2. [2] Y.N. Dastur, W.C. Leslie: Metall. Trans. A, 1981, vol. 12 (5), pp. 749–59.10.1007/BF02648339 ↗
3. [3] A.K. Srivastava, K. Das:J. Mater. Sci., 2008, vol. 43 (16), pp. 5654–58.10.1007/s10853-008-2759-y ↗
4. [4] Ding Z M, Wang S J, Yang F, Yan Y: T MATER HEAT TREAT, 2007, vol. 28(Supplement), pp. 29-33.
5. Kleshcheva I. I., Shur E. A.: Metalloved. Term. Obrab. Met. 1990, vol. 1, pp. 23-7.
6. Y. Imai, T. Saitô: Metalurgia, 1962, pp. 92–103.10.2307/950110 ↗
7. [7] Leigang Zheng, Xiaoqiang Hu, Xiuhong Kang, Dianzhong Li: Materials and Design, 2015, vol. 78, pp. 42-50.10.1016/j.matdes.2015.04.016 ↗
8. [8] Chang J: The study of low-temperature phase transformations of a high manganese steel. National Taiwan University of Science and Technology, Taiwan, 2011.
9. [9] Liao C Y: A study of Phase transformation in a 16Mn-low carbon steel. National Taiwan University of Science and Technology, Taiwan, 2008.
10. Jiang MJ: Carbides and pearlites in an Fe-20Mn-05C alloy. National Taiwan University of Science and Technology, Taiwan, 2009.
11. Sue WY: Phase transformations during aging processes in an Fe-301Mn-064C alloy. National Taiwan University of Science and Technology, Taiwan, 2010.
12. [12] Yang Y S: The study of low-temperature phase transformations in ultrahigh manganese steels. National Taiwan University of Science and Technology, Taiwan, 2012.
13. [13] Dusevich V M, Shur E A, Semenov I A: Metalloved. Term. Obrab. Met. 1989, vol. 9, pp. 46-9.
14. [14] Gruzin P L, Grigorkin V I, Mural V V, Moskaleva L N: Metalloved. Term. Obrab. Met. 1969, vol. 1, pp. 5-8.
15. [15] M.H. Lewis, B. Hattersley: Acta Metall. 1965, vol. 13, pp. 1159-68.10.1016/0001-6160(65)90053-2 ↗
16. [16] Lin Y L, Chou C P: Scripta Metal. Mater. 1992, vol. 27, pp. 67-70.10.1016/0956-716X(92)90321-5 ↗
17. [17] Rong Y H, Guo Y X, Hu G X: Metallography, 1989, vol. 22, pp. 47-55.10.1016/0026-0800(89)90021-9 ↗
18. [18] Spanos G, Reynolds W T, Jr., Vandermeer R A: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 1367-79.10.1007/BF02660669 ↗
19. [19] Howe J M, Spanos G: Philos. Mag. A, 1999, vol. 79(1), pp. 9-30.10.1080/01418619908214271 ↗
20. G. Gottstein, F. Schwarzer: Mater. Sci. Forum 1992, 94–96, pp.187-208.10.4028/www.scientific.net/MSF.94-96.187 ↗
21. [21] Je-Kang Du, Chau-Hsiang Wang, Kuo-Chiang Wang, Ker-Kong Chen: Intermetallics, 2014, vol. 45, pp. 80-83.10.1016/j.intermet.2013.10.001 ↗
22. [22] Lee TH, Ha HY, Kim SJ: Metall Mater Trans A, 2011, vol. 42A, 3543-48.10.1007/s11661-011-0924-4 ↗