The Role of Nucleation Behavior in Phase-Field Simulations of the Austenite to Ferrite Transformation
Source abstract
Abstract
Three-dimensional (3-D) phase-field simulations of the austenite (γ) to ferrite (α) transformation during continuous cooling at different cooling rates were performed for an Fe-0.10C-0.49Mn (wt pct) steel, with the aim of studying the interaction between the assumed nucleation temperature range and the effective interfacial mobility when fitting transformation kinetics curves. Ferrite nuclei are assumed to form continuously over a temperature range of δT. An effective interfacial mobility is assumed with an activation energy of 140 kJ/mol and a pre-exponential factor, μ 0. The pre-exponential factor and the nucleation temperature range are used as the only two adjustable parameters to match an experimental reference transformation curve for a particular cooling rate. The initial austenitic microstructure and the nuclei-density input data are based on experimental observations. A number of combinations of values (μ 0, δT) are found to represent the experimental reference curve equally well when related to the accuracy of experimental measurements. The comparison between the simulated and the experimental ferrite grain-size distribution is used as an additional criterion to establish the best estimate of nucleation temperature range and interface mobility.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A. Kolmogorov: Izv. Akad. Nauk USSR Ser. Matemat., 1937, vol. 3, pp. 355–59
2. W. Johnson, R. Mehl: Trans. AIME, 1939, vol. 135, pp. 416–58
3. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–2410.1063/1.1750631 ↗
4. I. Tamura, C. Ouchi, T. Tanaka, H. Sekine: Thermomechanical Processing of High Strength Low Alloy Steels, Butterworth & Co. Press, London, 1988, pp. 17–4810.1016/B978-0-408-11034-1.50005-2 ↗
5. R.A. Vandermeer: Acta Metall. Mater., 1990, vol. 38, pp. 2461–7010.1016/0956-7151(90)90257-H ↗
6. Y. van Leeuwen, S.I. Vooijs, J. Sietsma, S. van der Zwaag: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2925–3110.1007/s11661-998-0199-6 ↗
7. G.P. Krielaart, S. van der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–1810.1179/mst.1998.14.1.10 ↗
8. T.A. Kop, Y. van Leeuwen, J. Sietsma, S. van der Zwaag: ISIJ Int., 2000, vol. 40, pp. 713–1810.2355/isijinternational.40.713 ↗
9. Y. van Leeuwen, T.A. Kop, J. Sietsma, S. van der Zwaag: J. Phys. IV, 1999, vol. 9, pp. 401–0910.1051/jp4:1999941 ↗
10. I. Steinbach, F. Pezzolla, B. Nestler, M. Seeβelberg, R. Prieler, G.J. Schmitz, J.L.L. Rezende: Physica D, 1996, vol. 94, pp. 135–4710.1016/0167-2789(95)00298-7 ↗
11. J. Tiaden, B. Nestler, H.J. Diepers, I. Steinbach: Physica D, 1998, vol. 115, pp. 73–8610.1016/S0167-2789(97)00226-1 ↗
12. G. Pariser, P. Shaffnit, I. Steinbach, W. Bleck: Steel Res., 2001, vol. 72, pp. 354–6010.1002/srin.200100130 ↗
13. M.G. Mecozzi, J. Sietsma, S. van der Zwaag, M. Apel, P. Schaffnit, I. Steinbach: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2327–4010.1007/s11661-005-0105-4 ↗
14. M. Militzer, M.G. Mecozzi, J. Sietsma, S. van der Zwaag: Acta Mater., 2006, vol. 54, pp. 3961–7210.1016/j.actamat.2006.04.029 ↗
15. H.I. Aaronson, H.A. Domian, G.M. Pound: Trans. TMS-AIME, 1966, vol. 236, pp. 753–67
16. H.I. Aaronson, H.A. Domian, G.M. Pound: Trans. TMS-AIME, 1966, vol. 236, pp. 768–80
17. W.C. Johnson, C.L. White, P.E. Marth, P.K. Ruf, S.M. Tuominen, K.D. Wade, K.C. Russell, H.I. Aaronson: Metall. Trans. A, 1975, vol. 6A, pp. 911–1910.1007/BF02672315 ↗
18. S.E. Offerman, N.H. van Dijk, J. Sietsma, S. Grigull, E.M. Lauridsen, L. Margulies, H.F. Poulsen, M.Th. Rekveldt, S. van der Zwaag: Science, 2002, vol. 298, pp. 1003–0510.1126/science.1076681 ↗
19. B. Sundman, B. Jansson, J.-O. Andersson: Calphad, 1985, vol. 9, pp. 153–9010.1016/0364-5916(85)90021-5 ↗
20. MICRESS® software, ACCESS, Aachen, Germany, 2004
21. A. Giumelli, M. Militzer, E.B. Hambolt: ISIJ Int., 1999, vol. 29, pp. 271–8010.2355/isijinternational.39.271 ↗
22. G.P. Krielaart, S. van der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–1810.1179/mst.1998.14.1.10 ↗
23. Y. van Leeuwen, M. Onink, J. Sietsma, S. van der Zwaag: ISIJ Int., 2001, vol. 41, pp. 1037–4610.2355/isijinternational.41.1037 ↗
24. M.G. Mecozzi, J. Sietsma, S. van der Zwaag: Acta Mater., 2005, vol. 53, pp. 1431–40
25. F. Fazeli, M. Militzer: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1395–140510.1007/s11661-005-0232-y ↗
26. S.K. Kurtz, F.M.A. Carpay: J. Appl. Phys., 1980, vol. 51, pp. 5725–4410.1063/1.327580 ↗
27. K. Matsuura, Y. Itoh: Mater. Trans. JIM, 1991, vol. 32, p. 104210.2320/matertrans1989.32.1042 ↗