journal article·2010-12

Effect of High-Pressure Torsion Processing and Annealing on Hydrogen Embrittlement of Type 304 Metastable Austenitic Stainless Steel

Yoji Mine, Kazutaka Tachibana, Zenji Horita

Publisher page

Abstract

The effect of high-pressure torsion (HPT) and annealing on hydrogen embrittlement (HE) of a type 304 stainless steel was studied by metallographic characterization and tensile test after hydrogen gas charging. A volume fraction of ~78 pct of the austenite transformed to α′ martensite by the HPT processing at an equivalent strain of ~30. Annealing the HPT-processed specimen at a temperature of 873 K (600 °C) for 0.5 hours decreased the α′ martensite to ~31 pct with the average grain size reduced to ~0.43 μm through the reverse austenitic transformation. Hydrogen charge into the HPT-processed and the HPT+annealed specimens in the hydrogen content of ~10 to 20 ppm led to no severe HE but appeared in the solution-treated specimen. Especially the 873 K (600 °C) annealed specimen had the ~1.4 GPa tensile strength and the ~50 pct reduction of area (RA) despite the hydrogenation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A.P. Zhilyaev and T.G. Langdon: Progr. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
2. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, J. Zehetbauer, and Y.T. Zhu: JOM, 2006, vol. 58, pp. 33–39.10.1007/s11837-006-0213-7 ↗
3. K. Farrell and A.G. Quarrell: J. Iron Steel Inst., 1964, vol. 202, pp. 1002–11.
4. R.M. Vennett and G.S. Ansell: Trans. Am. Soc. Met., 1967, vol. 60, pp. 242–51.
5. R.B. Benson, Jr., R.K. Dann, and L.W. Roberts, Jr.: Trans. TMS-AIME, 1968, vol. 242, pp. 2199–2205.
6. M.R. Louthan, Jr., G.R. Caskey, Jr., J.A. Donovan, and D.E. Rawl, Jr.: Mater. Sci. Eng., 1972, vol. 10, pp. 357–68.10.1016/0025-5416(72)90109-7 ↗
7. A.W. Thomson: Mater. Sci. Eng., 1974, vol. 14, pp. 253–64.10.1016/0025-5416(74)90106-2 ↗
8. C.L. Briant: Metall. Trans. A, 1979, vol. 10A, pp. 181–89.10.1007/BF02817627 ↗
9. D. Eliezer, D.G. Chakrapani, C.J. Altstetter, and E.N. Pugh: Metall. Trans. A, 1979, vol. 10A, pp. 935–41.10.1007/BF02658313 ↗
10. S. Singh and C. Altstetter: Metall. Trans. A, 1982, vol. 13A, pp. 1799–1808.10.1007/BF02647836 ↗
11. T.-P. Perng and C.J. Altstetter: Metall. Trans. A, 1987, vol. 18A, pp. 123–34.10.1007/BF02646229 ↗
12. D.G. Ulmer and C.J. Altstetter: Acta Metall. Mater., 1991, vol. 39, pp. 1237–48.10.1016/0956-7151(91)90211-I ↗
13. J.R. Buckley and D. Hardie: Corros. Sci., 1993, vol. 34, pp. 93–107.10.1016/0010-938X(93)90261-E ↗
14. S. Fukuyama, K. Yokogawa, K. Kudo, and M. Araki: Trans. Jpn. Inst. Met., 1985, vol. 26, pp. 325–31.10.2320/matertrans1960.26.325 ↗
15. C. San Marchi, B.P. Somerday, X. Tang, and G.H. Schiroky: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 889–904.10.1016/j.ijhydene.2007.10.046 ↗
16. T. Matsuo, J. Yamabe, S. Matsuoka, and Y. Murakami: Effects of Hydrogen on Materials, B. Somerday, P. Sofronis, and R. Jones, eds., ASM INTERNATIONAL, Materials Park, OH, 2009, pp. 105–12.
17. Y. Mine, T. Kimoto, S. Matsuoka, and Y. Murakami: Kyushu University, Fukuoka, unpublished research, 2010.
18. T. Kanezaki, Y. Mine, Y. Fukushima, and Y. Murakami: Trans. Jpn. Soc. Mech. Eng. A, 2006, vol. 72, pp. 653–60 (in Japanese).10.1299/kikaia.72.653 ↗
19. T.-P. Perng and C.J. Altstetter: Metall. Trans. A, 1988, vol. 19A, pp. 145–52.10.1007/BF02669823 ↗
20. Y. Mine, Z. Horita, and Y. Murakami: Acta Mater., 2009, vol. 57, pp. 2993–3002.10.1016/j.actamat.2009.03.006 ↗
21. Y. Mine, Z. Horita, and Y. Murakami: Acta Mater., 2010, vol. 58, pp. 649–57.10.1016/j.actamat.2009.09.043 ↗
22. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, 1st ed., Oxford University Press, London, 1953, p. 139.
23. S.V. Dobatkin, O.V. Rybal’chenko, and G.I. Raab: Mater. Sci. Eng. A, 2007, vol. 463, pp. 41–45.10.1016/j.msea.2006.07.156 ↗
24. N. Tsuji, N. Kamikawa, R. Ueji, N. Takata, H. Koyama, and D. Terada: Inst. Steel Iron Jpn. Int., 2008, vol. 48, pp. 1114–21.10.2355/isijinternational.48.1114 ↗
25. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
26. T.-P. Perng and C.J. Altstetter: Acta Metall., 1986, vol. 34, pp. 1771–81.10.1016/0001-6160(86)90123-9 ↗
27. A. Demarez, A.G. Hock, and F.A. Meunier: Acta Metall., 1954, vol. 2, pp. 214–23.10.1016/0001-6160(54)90162-5 ↗