journal article·2014-09

Quantitative Comparison of Microtexture in Near-Alpha Titanium Measured by Ultrasonic Scattering and Electron Backscatter Diffraction

Adam L. Pilchak, Jia Li, Stanislav I. Rokhlin

Publisher page

Abstract

Ultrasonic backscattering and attenuation data were collected and processed using recently developed theoretical models to estimate the directionally dependent, volume-averaged size, and morphology of microtextured regions (MTRs) in a near-α Ti-8Al-1Mo-1V bar. The sample was also interrogated with electron backscatter diffraction from which MTR sizes were obtained by either manual segmentation and linear intercept analysis or fitting the spatial autocorrelation of similarly oriented c-axes to the geometrical autocorrelation function used in the scattering model. The results of the ultrasonic inversion were in good agreement with the EBSD measurements for the radial direction but were off by a factor of ~2.45 for the longitudinal direction. Reasons for the discrepancy were discussed and strategies to improve the agreement were made.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. K. Le Biavant, S. Pommier and C. Prioul: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 527-4510.1046/j.1460-2695.2002.00480.x ↗
2. A.P. Woodfield, M.D. Gorman, R.R. Corderman, J.A. Sutliff, and B. Yamrom: in Titanium’95: Science and Technology, P.A. Blenkinsop, W.J. Evans and H. Flower, eds., Institute of Materials, London, England, 1996, pp. 1116–23.
3. A.P. Woodfield, M.D. Gorman, J.A. Sutliff, and R.R. Corderman: in Proceedings of an International Symposium on Fatigue Behavior of Titanium Alloys, TMS, Warrendale, PA, 1999, pp. 111–18.
4. V. Sinha, M.J. Mills, J.C. Williams and J.E. Spowart: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1507-1810.1007/s11661-006-0095-x ↗
5. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1000-2710.1007/s11661-010-0507-9 ↗
6. A.L. Pilchak, K. Nakase, I. Inagaki, Y. Shirai, A.H. Rosenberger, and J.C. Williams: in Proceedings of the 12th International Conference on Titanium, L. Zhou, H. Chang, Y. Lu and D. Xu, eds., The Nonferrous Metals Society of China, 2012, pp. 1006–10.
7. P. Ari-Gur and S.L. Semiatin: Mater. Sci. Eng. A, 1998, vol. 257, pp. 118-2710.1016/S0921-5093(98)00829-6 ↗
8. T.R. Bieler and S.L. Semiatin: Int. J. Plasticity, 2002, vol. 18, pp. 1165-8910.1016/S0749-6419(01)00057-2 ↗
9. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 773-9410.1007/s11661-010-0434-9 ↗
10. N. Stefansson, S.L. Semiatin and D. Eylon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3527-3410.1007/s11661-002-0340-x ↗
11. N. Stefansson and S.L. Semiatin: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 691-9810.1007/s11661-003-0103-3 ↗
12. A.A. Salem, M.G. Glavicic, S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. 496, pp. 169-7610.1016/j.msea.2008.05.017 ↗
13. N. Gey, M. Humbert, M.J. Philippe and Y. Combres: Mater. Sci. Eng. A, 1996, vol. 219, pp. 80-8810.1016/S0921-5093(96)10388-9 ↗
14. N. Gey, M. Humbert, M.J. Philippe and Y. Combres: Mater. Sci. Eng. A, 1997, vol. 230, pp. 68-7410.1016/S0921-5093(97)80111-6 ↗
15. M. F.X. Gigliotti, B.P. Bewlay, J.B. Deaton, R.S. Gilmore, and G.A. Salishchev: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2119–2510.1007/s11661-000-0129-8 ↗
16. L. Yang, J. Li, O.I. Lobkis and S.I. Rokhlin: J. Nondestruct. Eval., 2012, vol. 31, pp. 270-8310.1007/s10921-012-0141-0 ↗
17. R.B. Thompson, F.J. Margetan, P. Haldipur, L.Yu, A. Li, P. Panetta and H. Wasan: Wave Motion, 2008, vol. 45, pp. 655-7410.1016/j.wavemoti.2007.09.008 ↗
18. R.B. Thompson, F.J. Margetan: Wave Motion, 2002, vol. 36, pp. 347-65.10.1016/S0165-2125(02)00029-X ↗
19. B. Ginty, P. Hallam, C. Hammond, G. Jackson, and C. Robb: in Titanium’80: Science and Technology, H. Kimura and O. Izumi, eds., Kyoto, TMS-AIME, Warrendale, PA, pp. 2095–2103.
20. A. Bhattacharjee, A.L. Pilchak, O.I. Lobkis, J.W. Foltz, S.I. Rokhlin and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2358-7210.1007/s11661-011-0619-x ↗
21. Y.K. Han and R.B. Thompson: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 91-104.10.1007/s11661-997-0085-7 ↗
22. P.D. Panetta, R.B. Thompson, and F.J. Margetan: in Review of Progress in Quantitative Nondestructive Evaluation, 17, D.O. Thompson and D.E. Chimenti, eds., Plenum Press, New York, NY, 1998, pp. 89–96.10.1007/978-1-4615-5339-7_11 ↗
23. M.P. Blodgett and D. Eylon: J. Nondestruct. Eval., 2001, vol. 20(1), pp. 1-1610.1023/A:1010611829059 ↗
24. L. Yang, O.I. Lobkis and S.I. Rokhlin: Ultrasonics, 2011, vol. 51, pp. 303-0910.1016/j.ultras.2010.10.002 ↗
25. M. Humbert, A. Moreau, E. Uta, N. Gey, P. Bocher and C. Bescond: Acta Mater., 2009, vol. 57, pp. 708-1410.1016/j.actamat.2008.10.012 ↗
26. L. Yang, O.I. Lobkis and S.I. Rokhlin: Wave Motion, 2012, vol. 49, pp. 544-6010.1016/j.wavemoti.2012.03.003 ↗
27. O.I. Lobkis and S.I. Rokhlin: Appl. Phys. Lett., 2010, vol. 96, article 161905, pp. 1–3.10.1063/1.3416910 ↗
28. O.I. Lobkis, L. Yang, J. Li and S.I. Rokhlin: Ultrasonics, 2012, vol. 52, pp. 694-705.10.1016/j.ultras.2011.12.002 ↗
29. J. Li, O.I. Lobkis, L. Yang, and S.I. Rokhlin: in Review of Progress in Quantitative Nondestructive Evaluation, 31, D.O. Thompson, and D.E. Chimenti, eds., American Institute of Physics, New York, 2012, pp. 1397–404.
30. A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley and R. Kerns: J. Microsc., 2011, vol. 244, pp. 181-8610.1111/j.1365-2818.2011.03524.x ↗
31. A.L. Pilchak, A.R. Shiveley, J.S. Tiley and D.L. Ballard: J. Microsc., 2011, vol. 244, pp. 38-4410.1111/j.1365-2818.2011.03496.x ↗
32. F.E. Stanke and G.S. Kino: J. Acoust. Soc. Am., 1984, vol. 75, pp. 665-81.10.1121/1.390577 ↗
33. F.E. Stanke: J. Acoust. Soc. Am., 1986, vol. 80, pp. 1479-85.10.1121/1.394403 ↗
34. R.L. Weaver: J. Mech. Phys. Solids, 1990, vol. 38(1), pp. 55-8610.1016/0022-5096(90)90021-U ↗
35. D. Rosca: Astron. Astrophys., 2010, vol. 520, A63, pp. 1-4
36. J.G. Berryman: J. Math Phys., 1987, vol. 28, pp. 244-4510.1063/1.527804 ↗
37. C.-S. Man, R. Paroni, Y. Xiang, and E.A. Kenik: J. Comput. Appl. Math., 2006, vol. 190, pp. 200–10.10.1016/j.cam.2005.01.044 ↗
38. E. Cinlar: in Stochastic Point Processes: Statistical Analysis, Theory, and Applications, P.A.W. Lewis ed., Wiley Interscience, New York, 1972, pp. 549–606.
39. S.G. Henderson: in Proceedings of 2005 Winter Simulation Conference, M.E. Kuhl, N.M. Steiger, F.B. Armstrong, and J.A. Joines, eds., 2005, pp. 120–29.
40. X. Gao, C.P. Przybyla, B.L. Adams: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2379-8710.1007/BF02586212 ↗
41. A. Moreau, L. Toubal, P. Bocher, M. Humbert, E. Uta, and N. Gey: Mater. Charact., 2013, vol. 75, pp. 115-28.10.1016/j.matchar.2012.09.011 ↗
42. A.A. Salem, M.G. Glavicic and S.L. Semiatin: Mater. Sci. Eng. A, 2008, vol. 494, pp. 350-5910.1016/j.msea.2008.06.022 ↗
43. F.J. Margetan, R.B. Thompson, and I. Yalda-Mooshabad: J. Nondestruct. Eval., 1994, vol. 13(3), pp. 111–3610.1007/BF00728250 ↗
44. A.L. Pilchak: Scripta Mater., 2013, vol. 68(5), pp. 277-80.10.1016/j.scriptamat.2012.10.041 ↗
45. J.H. Cho, A.D. Rollett and K.H. Oh: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1075-8610.1007/s11661-004-1010-y ↗
46. A.L. Pilchak: Scripta Mater., 2014, vol. 74, pp. 68-7110.1016/j.scriptamat.2013.10.024 ↗
47. A.L. Pilchak, C.J. Szczepanski, J.A. Shaffer, A.A. Salem, S.L. Semiatin: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4881-90.10.1007/s11661-013-1804-x ↗