Stored Energy in Nickel Cold Rolled to Large Strains, Measured by Calorimetry and Evaluated from the Microstructure
Source abstract
Abstract
High-purity polycrystalline nickel (99.99 pct purity) was cold rolled to equivalent von Mises strains from 1.4 to 4.5 (70 to 98 pct reduction in thickness). The stored energy of the deformed samples was measured using both microstructural parameters obtained from transmission electron microscope (TEM) investigations and differential scanning calorimetry (DSC). For the microstructure-based estimate of the stored energy, the required parameters are the misorientation angles across, and the spacings between the dislocation boundaries and high-angle boundaries present after deformation. It was found that the stored energy determined from both TEM and DSC investigations increased linearly with strain, with the latter being larger by a factor of between 1.9 and 2.7. This difference can be reduced by considering the contribution to the stored energy from other sources.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M.B. Bever, D.L. Holt, A.L. Titchener: Prog. Mater Sci., 1973, vol. 17, pp. 1–17710.1016/0079-6425(73)90001-7 ↗
2. D. Rönnpagel, C. Schwink: Acta Metall., 1978, vol. 26, pp. 319–3110.1016/0001-6160(78)90131-1 ↗
3. E. Woldt, D. Juul Jensen: Metall. Trans. A, 1995, vol. 26A, pp. 1717–2410.1007/BF02670758 ↗
4. L.M. Clarebrough, M.E. Hargreaves, G.W. West: Proc. R. Soc. London, Ser. A, 1955, vol. 232, pp. 262–70
5. B. Hutchinson, S. Jonsson, L. Ryde: Scripta Metall., 1989, vol. 23, pp. 671–7610.1016/0036-9748(89)90510-3 ↗
6. F. Bell: Arch. Eisenhüttenwesen, 1965, vol. 36, pp. 745–4910.1002/srin.196504146 ↗
7. A. Zahia, F. Salhi, J. Aride, D. Monya-Siesse, G. Moya: J. Alloys Compd., 1992, vol. 188, pp. 264–6710.1016/0925-8388(92)90690-B ↗
8. R.O. Williams: Trans. TMS-AIME, 1962, vol. 224, pp. 719–26
9. I. Baker, L. Liu, D. Mandal: Scripta Metall., 1995, vol. 32 (2), pp. 167–7110.1016/S0956-716X(99)80031-4 ↗
10. F. Bell, O. Krisement: Acta Metall., 1962, vol. 10, pp. 80–8310.1016/0001-6160(62)90191-8 ↗
11. L.M. Clarebrough, M.E. Hargreaves, G.W. West: Philos. Mag., 1953, vol. 44, pp. 913–1510.1080/14786440808520357 ↗
12. A. Godfrey, W.Q. Cao, N. Hansen, Q. Liu: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2371–7810.1007/s11661-005-0109-0 ↗
13. A. Godfrey, N. Hansen, D. Juul Jensen: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2329–3910.1007/s11661-007-9279-2 ↗
14. A. Godfrey, Q. Liu, D. Juul Jensen, and N. Hansen: Proc. 25th Risø Int. Symp., C. Gundlach, K. Haldrup, N. Hansen, X. Huang, D. Juul Jensen, T. Leffers, Z.J. Li, S.F. Nielsen, W. Pantleon, J.A. Wert, and G. Winther: 2004, pp. 317–22
15. T. Ungar, H. Mughrabi, D. Rönnpagel, M. Wilkens: Acta Metall., 1984, vol. 36, pp. 333–4210.1016/0001-6160(84)90106-8 ↗
16. T. Ungar, E. Schafler, P. Hanák, S. Bernstorff, and M. Zehetbauer: Mater. Sci. Eng., A, doi:10.1016/j.msea.2006.03.15610.1016/j.msea.2006.03.156 ↗
17. D.A. Hughes, N. Hansen: Metall. Trans. A, 1993, vol. 24A, pp. 2021–37
18. The Periodic System of the Elements, Linde Press, Aarhus, Denmark, 1993
19. D.A. Hughes, N. Hansen: Acta Mater., 2000, vol. 48, pp. 2985–300410.1016/S1359-6454(00)00082-3 ↗
20. W.T. Read, W. Shockley: Phys. Rev., 1950, vol. 78, pp. 275–8910.1103/PhysRev.78.275 ↗
21. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley, London, 1975, Chap. 3
22. A. Godfrey, D.A. Hughes: Mater. Charact., 2002, vol. 48, pp. 89–9910.1016/S1044-5803(02)00257-7 ↗
23. A. Godfrey, D.A. Hughes: Acta Mater., 2000, vol. 48, pp. 1897–190510.1016/S1359-6454(99)00474-7 ↗
24. P. Gordon: Trans. AIME, 1955, vol. 203, pp. 1043–52
25. D. Mandal, I. Baker: Scripta Metall., 1995, vol. 33 (5), pp. 831–3610.1016/0956-716X(95)00290-C ↗
26. G. Gottstein, H. Steffen, H. Wollenberger: Scripta Metall., 1973, vol. 7 pp. 451–5610.1016/0036-9748(73)90094-X ↗
27. D. Michell, E. Lovegrove: Philos. Mag., 1960, vol. 5, pp. 499–51810.1080/14786436008238301 ↗
28. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., A, 1989, vol. 113, pp. 1–4110.1016/0921-5093(89)90290-6 ↗
29. N. Hansen, D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1986, vol. 81, pp. 141–6110.1016/0025-5416(86)90258-2 ↗
30. Hütte , Des Ingenieurs Taschenbuch Theoretische Grundlagen, 28th edition, Verlag von Wilhelm Ernst & Sohn, Berlin, 1955, p. 1048
31. O.V. Mishin, D. Juul Jensen, N. Hansen: Mater. Sci. Eng., A, 2003, vol. A342, pp. 320–2810.1016/S0921-5093(02)00311-8 ↗
32. N. Hansen: Scripta Mater., 2004, vol. 51, pp. 801–0610.1016/j.scriptamat.2004.06.002 ↗
33. J.S. Koehler: Phys. Rev. B, 1970, vol. 2 (2), pp. 547–5110.1103/PhysRevB.2.547 ↗
34. K. Ikeda, K. Yamada, N. Takata, F. Yoshica, H. Nakashima, and N. Tsuji: Proc. 25th Risø Int. Symp., C. Gundlach, K. Haldrup, N. Hansen, X. Huang, D. Juul Jensen, T. Leffers, Z.J. Li, S.F. Nielsen, W. Pantleon, J.A. Wert, and G. Winther, eds., Risoe National Laboratory, Roskilde, Denmark, 2004, pp. 357–62
35. A.R. Jones, B. Ralph, N. Hansen: Proc. R. Soc. London, Ser. A, 1979, vol. 368, pp. 345–5710.1098/rspa.1979.0134 ↗