journal article·2013-11Open access

High Cycle Fatigue of Cast Mg-3Nd-0.2Zn Magnesium Alloys

Zhenming Li, Qigui Wang, Alan A. Luo, Penghuai Fu, Liming Peng, Yingxin Wang, Guohua Wu

Abstract

This paper investigates the high cycle fatigue properties of a recently developed high-strength cast magnesium alloy [Mg-3Nd-0.2Zn (all compositions in wt pct except when otherwise stated)] with varied Zr contents for grain refinement (NZ30K) and the influence of heat treatment conditions. The NZ30K alloy containing 0.45Zr and heat treated to the peak-aged T6 condition [14 hours at 473 K (200 °C)] shows the highest fatigue strength, about 100 MPa, which is about 25 pct higher than that of commercial AZ91D-T6 alloy. In the absence of casting flaws, the high cycle fatigue properties of the NZ30K alloy strongly depend on its grain size and heat treatment conditions. The dependency of fatigue strength on grain sizes follows the Hall–Petch relationship. The NZ30K alloy also shows a significant response to heat treatments. The fatigue strength increases in a near linear fashion with increasing yield strength of the material through heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A.I. Taub, P.E. Krajewski, A.A. Luo, and J.N. Owens: JOM (Journal of Metals), 2007, vol. 59, pp. 48–57.10.1007/s11837-007-0022-7 ↗
2. A.A. Luo: SAE Transactions - Journal of Materials and Manufacturing, 2005, vol. 114, pp. 411–21.
3. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
4. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 85–97.10.1016/S1471-5317(00)00009-2 ↗
5. M.F. Horstemeyer, N. Yang, K. Gall, D.L. McDowell, J. Fan, and P.M. Gullett: Acta Mater., 2004, vol. 52, pp. 1327–36.10.1016/j.actamat.2003.11.018 ↗
6. M.D. Chapetti, T. Tagawa, and T. Miyata: Mater. Sci. Eng. A, 2003, vol. 356, pp. 236–44.10.1016/S0921-5093(03)00136-9 ↗
7. P.H. Fu, L.M. Peng, H.Y. Jiang, J.W. Chang, and C.Q. Zhai: Mater. Sci. Eng. A, 2008, vol. 486, pp. 183–92.10.1016/j.msea.2007.08.064 ↗
8. P.H. Fu, L.M. Peng, H.Y. Jiang, L. Ma, and C.Q. Zhai: Mater. Sci. Eng. A, 2008, vol. 496, pp. 177–88.10.1016/j.msea.2008.05.010 ↗
9. L.L. Rokhlin: Magnesium Alloys Containing Rare Earth Metals, Taylor and Francis, London, 2003, pp. 159–64.10.1201/9781482265163 ↗
10. “Specification and Verification of Tensile and Fatigue Properties in Cast Components”, GM ENGINEERING STANDARDS, Material Specification Metals, GMN7152, Feb. 2002.
11. P.H. Fu, L.M. Peng, H.Y. Jiang, C.Q. Zhai, C.Q. Zhai, X. Gao, and J.F. Nie: Mater. Sci. Forum, 2007, vol. 546–549, pp. 97–100.10.4028/www.scientific.net/MSF.546-549.97 ↗
12. E.O. Hall: Proc. Phys. Soc. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
13. J.R. Davis: Aluminum and Aluminum Alloys, ASM, Metals Park, OH, 1993, pp. 113.
14. Q.G. Wang and P. Jones: SAE Int. J. Mater. Manuf., 2011, vol. 4, pp. 289–97.10.4271/2011-01-0193 ↗
15. J.B. Clark: Acta Metall., 1968, vol. 16, pp. 141.10.1016/0001-6160(68)90109-0 ↗
16. C.H. Cáceres, C.J. Davidson, J.R. Griffith, and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 325, pp. 344–55.10.1016/S0921-5093(01)01467-8 ↗
17. H. Mughrabi: Rev. Phys. Appl., 1988, vol. 23, pp. 367–79.10.1051/rphysap:01988002304036700 ↗
18. S.E. Harvey, P.G. Marsh, and W.W. Gerberich: Acta Metall Mater., 1994, vol. 42, pp. 3493–3502.10.1016/0956-7151(94)90481-2 ↗
19. J. Man, K. Obrtlik, C. Blochwitz, and J. Polak: Acta Mater., 2002, vol. 50, pp. 3767–80.10.1016/S1359-6454(02)00167-2 ↗
20. J. Polak, J. Man, T. Vystavel, and M. Petrenec: Mater. Sci. Eng. A, 2009, vol. 517, pp. 204–11.10.1016/j.msea.2009.03.070 ↗
21. T.J. Marrow, A.A. Bin, I.N. Khan, S.M.A. Sim, and S. Torkamani: Mater. Sci. Eng. A, 2004, vol.419, pp. 387–89.
22. F. Yang, F. Lv, X.M. Yang, S.X. Li, Z.F. Zhang, and Q.D. Wang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2231–38.10.1016/j.msea.2010.12.092 ↗
23. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055–65.10.1016/S1359-6454(03)00005-3 ↗
24. T. Obara, H. Yoshinea, and S. Morozumi: Acta Metall., 1973, vol. 21, pp. 845–53.10.1016/0001-6160(73)90141-7 ↗
25. S.E. Lon, F.J. Humphreys, and S.H. White: Acta Metall., 1982, vol. 30, pp. 1909–19.10.1016/0001-6160(82)90031-1 ↗
26. P.H. Fu, L.M. Peng, J.F. Nie, H.Y. Jiang, L. Ma, and L. Bourgeois: Mater. Sci. Forum, 2011, vol. 690, pp. 230–33.10.4028/www.scientific.net/MSF.690.230 ↗
27. Q.G. Wang: Ph.D. Thesis, The University of Queensland, Brisbane, Australia, 1997.
28. C.H. Cáceres, J.R. Griffiths, and P. Reiner: Acta Mater., 1996, vol. 44, pp. 15–23.10.1016/1359-6454(95)00171-6 ↗
29. C.H. Cáceres and J.R. Griffiths: Acta Mater., 1996, vol. 44, pp. 25–33.10.1016/1359-6454(95)00172-8 ↗
30. D.K. Xu, L. Liu, Y. B. Xu, and E.H. Han: Acta Mater., 2008, vol. 56, pp. 985–94.10.1016/j.actamat.2007.10.057 ↗
31. F. Yang, S.M. Yin, S.X. Li, and Z.F. Zhang: Mater. Sci. Eng. A, 2008, vol. 491, pp. 131–36.10.1016/j.msea.2008.02.003 ↗
32. T.S. Shih, W.S. Liu, and Y.J. Chen: Mater. Sci. Eng. A, 2002, vol. 325, pp. 152–62.10.1016/S0921-5093(01)01411-3 ↗
33. L. Gao, R.S. Chen, and E.H. Han: J. Alloy. Compd., 2009, vol. 481, pp. 379–84.10.1016/j.jallcom.2009.02.131 ↗
34. L. Gao, R.S. Chen, and E.H. Han: J. Alloy. Compd., 2009, vol. 472, pp. 234–40.10.1016/j.jallcom.2008.04.049 ↗
35. J. Dong, W.C. Liu, X. Song, P. Zhang, W.J. Ding, and A.M. Korsunsky: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6053–63.10.1016/j.msea.2010.06.030 ↗
36. S.M. He, X.Q. Zeng, L.M. Peng, X. Gao, J.F. Nie, and W.J. Ding: J. Alloy. Compd., 2006, vol. 421, pp. 309–13.10.1016/j.jallcom.2005.11.046 ↗