journal article·2013-07

The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading

Zhongyuan Qian, Scott Chumbley, Tugce Karakulak, Eric Johnson

Publisher page

Abstract

Accurate measurement of residual stress is necessary to obtain reliable predictions of fatigue lifetime and enable estimation of time-to-facture for any given stress level. In this article, relaxation of welding residual stresses as a function of cyclic loading was documented on three common steels: AISI 1008, ASTM A572, and AISI 4142. Welded specimens were subjected to cyclic bending (R = 0.1) at different applied stresses, and the residual stress relaxation existing near the welds was measured as a function of cycles. The steels exhibited very different stress relaxation behaviors during cyclic loadings, which can be related to the differences in the microstructures of the specimens. A phenomenological model, which treats dislocation motion during cyclic loading as being analogous to creep of dislocations, is proposed for estimation of the residual stress relaxation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. McClung R C, “A literature survey on the stability and significance of residual stresses during fatigue”, Fatigue and fracture of Engineering Materials and Structures, 30, 173-205, 2007.10.1111/j.1460-2695.2007.01102.x ↗
2. S. Berge and O.I. Eide: ASTM STP 776, 1982.
3. John R, Jata K V and Sadananda K, “Residual stress effects on near-threshold fatigue crac k growth in friction stir welds in aerospace alloys”, International Journal of Fatigue, 25, 939-948, 2003.10.1016/j.ijfatigue.2003.08.002 ↗
4. Chiarelli M, Lanciotti A and Sacchi M, “Fatigue resistance of MAG welded steel elements”, International Journal of Fatigue, 21, 1099-1110, 1999.10.1016/S0142-1123(99)00080-8 ↗
5. F.V. Lawrence Jr., J.D. Burk, and J.Y Yung: ASTM STP 776, 1982, pp. 33–43.10.1520/STP30097S ↗
6. Webster G A and Ezeilo A N, “Residual stress distributions and their influence on fatigue lifetimes”, International Journal of Fatigues, 23, 375-383, 2001.10.1016/S0142-1123(01)00133-5 ↗
7. Liljedahl C D M, Zanellato O, Fitzpatrick M E, Lin J and Edwards L, “The effect of weld residual stresses and their re-distribution with crack growth during fatigue under constant amplitude loading”, International Journal of Fatigue, 32, 735-743, 2010.10.1016/j.ijfatigue.2009.10.012 ↗
8. Holzapfel H, Schulze V, Vohringer O and Macherauch E, “Residual Stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures”, Materials Science and Engineering: A, 248, 9-18, 1998.10.1016/S0921-5093(98)00522-X ↗
9. P. Hurrell, C.T. Watson, D. Everett, and S. Bate: Proceedings of ASME Pressure Vessels and Piping Conference, Vancouver, BC, Canada, 2006, pp. 801–812.10.1115/PVP2006-ICPVT-11-93381 ↗
10. Aoki S, Nishimura T and Hiroi T, “Reduction method for residual stress of welded joint using random vibration”, Nuclear Engineering and Design, 235, 1441-1445, 2005.10.1016/j.nucengdes.2005.02.005 ↗
11. Munsi A S M Y, Waddell A J and Walker C A, “Vibratory stress relief – an investigation of the torsional stress effect in welded shafts”, Journal of Strain Analysis, Vol.36, No.5 453-464, 2001.10.1243/0309324011514610 ↗
12. Walker C A, Waddell A J and Johnston D J, “Vibratory stress relief – an investigation of the underlying processes”, Proceedings of the Institution of Mechanical Engineers, Vol.209, 51-58, 1995.10.1243/PIME_PROC_1995_209_228_02 ↗
13. M.R. James (1987) Advances in Surface Treatments: Technology, Applications, and Effects. Pergamon Press, Oxford, pp. 349-365.
14. Wick A, Schulze V amd Vohringer O, “Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel”, Materials Science and Engineering A, Vol.293, 191-197, 2000.10.1016/S0921-5093(00)01035-2 ↗
15. Torres M A S and Voorwald H J C, “An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel”, International Journal of Fatigue, Vol.24, 877-886, 2002.10.1016/S0142-1123(01)00205-5 ↗
16. Lorentzen T, Daymond M R, Clausen B and Tome C N, “Lattice strain evolution during cyclic loading of stainless steel”, Acta Materialia, 50, 1627-1638, 2002.10.1016/S1359-6454(02)00029-0 ↗
17. Bruno G and Pagel T N, “The residual stress relaxation after fatigue in fine-grained steels”, Applied Physics A, 74, 1388-1390, 2002.10.1007/s003390201788 ↗
18. Dattoma V, De Giorgi M and Nobile R, “Numerical evaluation of residual stress relaxation by cyclic load”, Journal of Strain Analysis, Vol.39, No.6, 663-72, 2004.10.1243/0309324042379248 ↗
19. Barsoum Z, “Residual stress prediction and relaxation in welded tubular joints under constant cyclic loading”, Materials Science Forum, Vol.524-525, 323-330, 2006.10.4028/www.scientific.net/MSF.524-525.323 ↗
20. Benedetti M, Fontanari V, Monelli BD (2010) Journal of Engineering Materials and Technology 132(1):011012.10.1115/1.3184083 ↗
21. De Giorgi M, “Residual Stress evolution in cold-rolled steels”, International Journal of Fatigue, Vol.33, 507-512, 2011.10.1016/j.ijfatigue.2010.10.006 ↗
22. Li Y, Lu J and Xu K, “Calculation of relaxation of residual stress and change of yield strength in shot peened layer”, Materials Science Forum, Vol.490-491, 396-403, 2005.10.4028/www.scientific.net/MSF.490-491.396 ↗
23. Teodosio J R, Fonseca M C and Pedrosa P D, “Relaxation of residual stresses during fatigue cycles in steels”, Materials Science Forum, Vol.426-432, 3981-3988, 2003.10.4028/www.scientific.net/MSF.426-432.3981 ↗
24. Fox M E and Withers P J, “Relaxation of residual stresses in and around mechanical fasteners due to fatigue loading”, Materials Science Forum, Vol.524-525, 153-158, 2006.10.4028/www.scientific.net/MSF.524-525.153 ↗
25. Takanashi M, Kamata K and Iida K, “Relaxation behavior of welding residual stresses by fatigue loading in smooth longitudinal butt welded joints”, Welding in the World, Vol.44, No.4, 2-8, 2000.
26. Lachmann C, Pagel T N and Wohlfahrt H, “Characterisation of Residual Stress Relaxation in Fatigue Loaded Welded Joints by X-Ray Diffraction and Barkhausen Noise Method”, Materials Science Forum, Vol.347-349, 374-381, 2000.10.4028/www.scientific.net/MSF.347-349.374 ↗
27. Zhuang W Z and Halford G R, “Investigation of residual stress relaxation under cyclic load”, International Journal of Fatigue, Vol.23, 31-37, 2001.10.1016/S0142-1123(01)00132-3 ↗
28. Withers P J, “Residual Stress and its role in failure”, Reports on Progress in Physics, 70, 2211-2264, 2007.10.1088/0034-4885/70/12/R04 ↗
29. J. Morrow and G.M. Sinclair: ASTM STP 237, 1959.
30. H.R. Jhansale and T.H. Topper: ASTM STP 519, 1973, pp. 246–70.
31. Kodama S, “The behavior of residual stress during fatigue stress cycles”, Proceedings of the International Conference on Mechanical Behavior of Metals II, 111-118, 1972.
32. Valluri S R, “Some recent developments at ‘Galcit’ concerning A theory of metal fatigue”, Acta Metallurgica, Vol.11, 759-775, 1963.10.1016/0001-6160(63)90013-0 ↗
33. Radhakrishnan V M and Prasad C R, “Relaxation of residual stress with fatigue loading”, Engineering Fracture Mechanics, Vol.8, Issue 4, 593-597, 1976.10.1016/0013-7944(76)90033-3 ↗
34. Hutchings M T, Withers P J, Holden T M, Lorentzen T: Introduction to the Characterization of Residual Stress by Neutron Diffraction, Taylor& Francis Group, Boca Raton, FL, 2005.10.1201/9780203402818 ↗
35. Noyan I C and Cohen J B: Residual Stress: Measurement by Diffraction and Intepretation, Springer-Verlag, New York, 1987.10.1007/978-1-4613-9570-6 ↗
36. Lu J: Handbook of Measurement of Residual Stresses, Society For Experimental Mechanics, Lilburn, GA, 1996.
37. Webster P J, Oosterkamp L D, P.A. Browne et al.: Synchrotron X-ray residual strain scanning of a friction stir weld, Journal of Strain Analysis, Vol. 35, No.1, 61-70, 2001.
38. P.S. Prevey: Developments in Materials Characterization Technologies, ASM International, Materials Park, OH, 1996, pp. 103–10.
39. ASTM International: ASTM E915, West Conshohocken, PA, USA.
40. F.V. Lawrence, S.D. Dimitrackis, and W.H. Munse: Report No. 173, Fracture Control Program, University of Illinois at Urbana-Champaign, 1996.
41. S.D. Dimitrakis: PhD Thesis, University of Illinois at Urbana-Champaign, 1999.
42. Z. Qian, S. Chumbley, and E. Johnson: Unpublished research, 2011.
43. Pattinson E J and Dugdale D S, “Fading of residual stresses due to repeated loading”, Metallurgia, 66, 228-230, 1982.
44. Morrow J, Ross A S and Sinclair G M, “Relaxation of residual stresses due to fatigue loading”, SAE Transactions, 68, 40-48, 1960.
45. Qian Z, Chumbley S, Johnson E, “The effect of specimen dimension on residual stress relaxation of carburized and quenched steels”, Materials Science and Engineering A, Vol. 529, 246-252, 2011.10.1016/j.msea.2011.09.024 ↗