Influence of Aging and Thermomechanical Treatments on the Mechanical Properties of a Nanocluster-Strengthened Ferritic Steel
Source abstract
Abstract
This study investigated the effect of aging and thermomechanical treatments on the mechanical properties of a nanocluster-strengthened ferritic steel, Fe-1.5Mn-2.5Cu-4.0Ni-1.0Al (wt pct). The effect of thermomechanical treatments on the microhardness and tensile properties were measured at room temperature and correlated with microstructural features. Cu-rich precipitates were characterized by transmission electron microscopy and were found to coarsen slowly during long-time aging. The microhardness measurements indicate a typical precipitation hardening behavior during aging at 773 K (500 °C). Tensile tests showed that thermomechanical treatments can improve the mechanical strength and ductility of the nanocluster-strengthened ferritic steel significantly compared with those without the treatments. Fractography results indicated that the high yield strength resulted from precipitation hardening makes the steel more susceptible to grain-boundary decohesion, which can be suppressed by grain refinement. Atmosphere adsorption and diffusion along grain boundaries were found to intensify brittle intergranular fracture, and this embrittlement can be avoided by vacuum heat treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. H.R. Habibi Bajguirani: Mater. Sci. Eng. A, 2002, vol. 338, pp. 142-59.10.1016/S0921-5093(02)00062-X ↗
2. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman, and M.E. Fine: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 363-73.10.1007/s11661-007-9417-x ↗
3. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 241-53.10.1007/s11661-003-0326-3 ↗
4. M.E. Fine and D. Isheim: Scripta Mater., 2005, vol. 53, pp. 115-18.10.1016/j.scriptamat.2005.02.034 ↗
5. D. Isheim, M.S. Gagliano, M.E. Fine, and D.N. Seidman: Acta Mater., 2006, vol. 54, pp. 841-49.10.1016/j.actamat.2005.10.023 ↗
6. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Nav. Eng. J., 1990, vol. 102, pp. 63-82.10.1111/j.1559-3584.1990.tb02632.x ↗
7. A.D. Wilson: J. Metals, 1987, vol. 39, pp. 36-38.
8. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557-71.10.1007/BF02649815 ↗
9. M.T. Miglin, J.P. Hirth, A.R. Rosenfield, and W.A.T. Clark: Metal. Trans. A, 1986, vol. 17A, pp. 791-98.10.1007/BF02643854 ↗
10. S.W. Thompson, D.J. Colvin, and G. Krauss: Metal. Trans. A, 1990, vol. 21A, pp. 1493-1507.10.1007/BF02672564 ↗
11. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259-70.10.1007/s11661-001-0201-z ↗
12. S.K. Dhua, A. Ray, and D.S. Sarma: Mater. Sci. Eng. A, 2001, vol. 318, pp. 197-210.10.1016/S0921-5093(01)01259-X ↗
13. G.C. Hwang, S. Lee, J.Y. Yoo, and W.Y. Choo: Mater. Sci. Eng. A, 1998, vol. 252, pp. 256-68.10.1016/S0921-5093(98)00670-4 ↗
14. S. Vaynman, M.E. Fine, S. Lee, and H.D. Espinosa: Scripta Mater., 2006, vol. 55, pp. 351-54.10.1016/j.scriptamat.2006.04.029 ↗
15. S. Vaynman, D. Isheim, M.E. Fine, D.N. Seidman, and S.P. Bhat: 2004 Conf. Proc., vol. 1. New Orleans, LA, AIST and TMS, 2004, pp. 525–30.
16. D. Isheim and D.N. Seidman: Surf. Interface Anal., 2004, vol. 34, pp. 569-74.10.1002/sia.1703 ↗
17. T. Harry and D.J. Bacon: Acta Mater., 2002, vol. 50, pp. 209-22.10.1016/S1359-6454(01)00332-9 ↗
18. J.H. Shim and Y.W. Choo: Appl. Phys. Lett., 2007, vol. 90, p. 021906.10.1063/1.2429902 ↗
19. W.M. Kane, U. Krupp, and C.J. McMahon: Mater. Sci. Eng. A, 2009, vol. 507, pp. 58-60.10.1016/j.msea.2008.12.002 ↗
20. C.J. McMahon: Interface Sci., 2004, vol. 12, pp. 141-46.10.1023/B:INTS.0000028644.07075.4e ↗
21. S.B. Fisher, J.E. Harbottle, and N. Aldrige: Phil. Trans. R. Soc. Lond. A, 1985, vol. 315, pp. 301-32.10.1098/rsta.1985.0042 ↗
22. W.M. Kane, U. Krupp, and C.J. McMahon: Mater. Sci. Eng. A, 2009, vol. 507, pp. 61-65.10.1016/j.msea.2008.07.015 ↗
23. C.T. Liu and C.L. White: Acta Metall., 1987, vol. 35, pp. 643-49.10.1016/0001-6160(87)90187-8 ↗
24. C.T. Liu, C.L. White, and E.H. Lee: Scripta Metall., 1985, vol. 19, pp. 1247-50.10.1016/0036-9748(85)90247-9 ↗
25. M. Takeyama and C.T. Liu: Mater. Sci. Eng. A, 1992, vol. 153, pp. 538-47.10.1016/0921-5093(92)90249-Z ↗
26. R. Zee, C. Yang, Y.X. Lin, and B. Chin: J. Mater. Sci., 1991, vol. 26, pp. 3853-61.10.1007/BF01184982 ↗
27. J.H. Zhu and C.T. Liu: Intermetallics, 2002, vol. 10, pp. 309-16.10.1016/S0966-9795(01)00134-0 ↗
28. Z.W. Zhang, C.T. Liu, S. Guo, J.L. Cheng, G. Chen, T. Fujita, M.W. Chen, Y.W. Chung, S. Vaynman, M.E. Fine, and B.A. Chin: Mater. Sci. Eng. A, 2011, vol. 528, pp. 855-59.10.1016/j.msea.2010.10.058 ↗
29. M.K. Miller and K.F. Russell: J. Nucl. Mater., 2007, vol. 371, pp. 145-60.10.1016/j.jnucmat.2007.05.003 ↗
30. A. Machova: Mater. Sci. Eng. A, 2001, vols. 319-21, pp. 574-77.10.1016/S0921-5093(01)00923-6 ↗
31. S. Sangal and S. Yannacopoulos: Can. Metall. Q., 1992, vol. 31, pp. 55-61.10.1179/cmq.1992.31.1.55 ↗
32. B. Hwang and C.G. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4341-46.10.1016/j.msea.2010.03.106 ↗
33. X.M. Deng, F.S. Ma, and M.A. Sutton: Int. J. Damage Mech., 2005, vol. 14, pp. 101-26.10.1177/1056789505045931 ↗
34. C.T. Liu, R.W. Carpenter, and H. Inouye: Metall. Trans. A, 1975, vol. 6A, pp. 419-21.10.1007/BF02667300 ↗
35. U. Krupp, W.M. Kane, C. Laird, and C.J. McMahon: Mater. Sci. Eng. A, 2004, vol. 387, pp. 409-13.10.1016/j.msea.2004.05.053 ↗